[EXT] Re: [PATCH v12 00/13] amphion video decoder/encoder driver
Nicolas Dufresne
nicolas at ndufresne.ca
Thu Dec 2 20:09:59 PST 2021
Le vendredi 26 novembre 2021 à 06:31 +0000, Ming Qian a écrit :
> > -----Original Message-----
> > From: Nicolas Dufresne [mailto:nicolas at ndufresne.ca]
> > Sent: Thursday, November 25, 2021 11:36 PM
> > To: Ming Qian <ming.qian at nxp.com>; mchehab at kernel.org;
> > shawnguo at kernel.org; robh+dt at kernel.org; s.hauer at pengutronix.de
> > Cc: hverkuil-cisco at xs4all.nl; kernel at pengutronix.de; festevam at gmail.com;
> > dl-linux-imx <linux-imx at nxp.com>; Aisheng Dong <aisheng.dong at nxp.com>;
> > linux-media at vger.kernel.org; linux-kernel at vger.kernel.org;
> > devicetree at vger.kernel.org; linux-arm-kernel at lists.infradead.org
> > Subject: Re: [EXT] Re: [PATCH v12 00/13] amphion video decoder/encoder
> > driver
> >
> > Caution: EXT Email
> >
> > Le jeudi 25 novembre 2021 à 05:25 +0000, Ming Qian a écrit :
> > > For test [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0)
> > > VPSSPSPPS_A_MainConcept_1, The vpu report an unsupported message to
> > driver, so driver report pollerr to gstreamer.
> > > But this stream can be decoded using the amphion vpu when I test it
> > > using our unit test, I checked the difference, there are many vps, sps
> > > and pps at the beginning, gstreamer will skip the first vpu and two
> > > pps, totally skip 56 bytes. It leds to vpu can't decode And our unit test
> > > won't
> > skip anthing, so the vpu can decode the stream.
> >
> > This specific test triggers a bug in GStreamer HEVC parser, I'm aware of
> > this
> > one, and it is on my todo to fix (just not as trivial as it looks like, the
> > VCL nal
> > detection code was implemented wrong and that ended up leaking into the
> > rest of the design). This specific test will of course be marked and skipped
> > for CI
> > test that uses GStreamer.
> >
> > regards,
> > Nicolas
>
> Hi Nicolas,
>
> For the h264 decoder test, If I test with our unit test tool, the result
> is 124/135 tests successfully,
> But only 75/135 tests successfully when test using gstreamer.
> There are 49 tests with different results, and all of the 49 test streams
> are interlaced stream.
> The amphion vpu will output the interlaced frame directly, it won't merge the
> interlaced two parts into one progressive frame.
> And the gstreamer tiled unpack function(unpack_NV12_TILED) won't handle
> the interlaced case, so the output frame is abnormal, and led to test fail.
> I think it should be a hardware limitation of the amphion vpu. And maybe
If this is the case, it needs to be signaled as ALTERNATE (if you have 1 v4l2
buffer per field) or SEQ if they are stored in the same v4l2_buffer but on top
of each other instead of interleaved.
Some bit about this might not we all wired properly, I have only tested
alternate field for capture devices (Xilinx ZinqMP). Please check the signalling
of interlace field in your driver, I'll check the state of GStreamer in this
regard.
> the gstreamer videoconvert can handle it.
> The interlaced list is as below:
> [JVT-AVC_V1] cabac_mot_fld0_full
> [JVT-AVC_V1] cabac_mot_mbaff0_full
> [JVT-AVC_V1] cabac_mot_picaff0_full
> [JVT-AVC_V1] CABREF3_Sand_D
> [JVT-AVC_V1] CAFI1_SVA_C
> [JVT-AVC_V1] CAMA1_Sony_C
> [JVT-AVC_V1] CAMA1_TOSHIBA_B
> [JVT-AVC_V1] CAMA3_Sand_E
> [JVT-AVC_V1] CAMACI3_Sony_C
> [JVT-AVC_V1] CAMANL1_TOSHIBA_B
> [JVT-AVC_V1] CAMANL2_TOSHIBA_B
> [JVT-AVC_V1] CAMANL3_Sand_E
> [JVT-AVC_V1] CAMASL3_Sony_B
> [JVT-AVC_V1] CAMP_MOT_MBAFF_L30
> [JVT-AVC_V1] CAMP_MOT_MBAFF_L31
> [JVT-AVC_V1] CANLMA2_Sony_C
> [JVT-AVC_V1] CANLMA3_Sony_C
> [JVT-AVC_V1] CAPA1_TOSHIBA_B
> [JVT-AVC_V1] CAPAMA3_Sand_F
> [JVT-AVC_V1] cavlc_mot_fld0_full_B
> [JVT-AVC_V1] cavlc_mot_mbaff0_full_B
> [JVT-AVC_V1] cavlc_mot_picaff0_full_B
> [JVT-AVC_V1] CVCANLMA2_Sony_C
> [JVT-AVC_V1] CVFI1_Sony_D
> [JVT-AVC_V1] CVFI1_SVA_C
> [JVT-AVC_V1] CVFI2_Sony_H
> [JVT-AVC_V1] CVFI2_SVA_C
> [JVT-AVC_V1] CVMA1_Sony_D
> [JVT-AVC_V1] CVMA1_TOSHIBA_B
> [JVT-AVC_V1] CVMANL1_TOSHIBA_B
> [JVT-AVC_V1] CVMANL2_TOSHIBA_B
> [JVT-AVC_V1] CVMAPAQP3_Sony_E
> [JVT-AVC_V1] CVMAQP2_Sony_G
> [JVT-AVC_V1] CVMAQP3_Sony_D
> [JVT-AVC_V1] CVMP_MOT_FLD_L30_B
> [JVT-AVC_V1] CVMP_MOT_FRM_L31_B
> [JVT-AVC_V1] CVNLFI1_Sony_C
> [JVT-AVC_V1] CVNLFI2_Sony_H
> [JVT-AVC_V1] CVPA1_TOSHIBA_B
> [JVT-AVC_V1] FI1_Sony_E
> [JVT-AVC_V1] MR6_BT_B
> [JVT-AVC_V1] MR7_BT_B
> [JVT-AVC_V1] MR8_BT_B
> [JVT-AVC_V1] MR9_BT_B
> [JVT-AVC_V1] Sharp_MP_Field_1_B
> [JVT-AVC_V1] Sharp_MP_Field_2_B
> [JVT-AVC_V1] Sharp_MP_Field_3_B
> [JVT-AVC_V1] Sharp_MP_PAFF_1r2
> [JVT-AVC_V1] Sharp_MP_PAFF_2r
>
More information about the linux-arm-kernel
mailing list