[PATCH] arm64: dts: ti: k3-am64-main: add timesync router node

[Christian Gmeiner]

Hi

>
> On 11/9/21 8:31 PM, Christian Gmeiner wrote:
> > The Time Sync Event Router (TIMESYNC_INTRTR0) implements a set of
> > multiplexers to provide selection of active CPTS time sync events for
> > routing to CPTS capable modules.
> >
> > This patch adds DT node TIMESYNC_INTRTR0 using "pinctrl-single" bindings.
> >
> > Signed-off-by: Grygorii Strashko <grygorii.strashko at ti.com>
> > Signed-off-by: Vignesh Raghavendra <vigneshr at ti.com>
> > Signed-off-by: Christian Gmeiner <christian.gmeiner at gmail.com>
> > ---
> >  arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> > index 42d1d219a3fd..c9321a80353a 100644
> > --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> > +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> > @@ -564,6 +564,14 @@ cpts at 39000000 {
> >               ti,cpts-ext-ts-inputs = <8>;
> >       };
> >
> > +     timesync_router: timesync-router at a40000 {
>
> Node with "pinctrl-single" would need to be named pinctrl at reg.
> Else this would probably fail dtbs_check once pinctrl-single bindings is
> converted to YAML format.
>

Okay.. will send a v2.

> > +             compatible = "pinctrl-single";
> > +             reg = <0x0 0xa40000 0x0 0x800>;
> > +             #pinctrl-cells = <1>;
> > +             pinctrl-single,register-width = <32>;
> > +             pinctrl-single,function-mask = <0x000107ff>;
> > +     };
> > +
> >       usbss0: cdns-usb at f900000{
> >               compatible = "ti,am64-usb";
> >               reg = <0x00 0xf900000 0x00 0x100>;
> >
>

-- 
greets
--
Christian Gmeiner, MSc

https://christian-gmeiner.info/privacypolicy