[PATCH v12, 15/19] dt-bindings: media: mtk-vcodec: Adds decoder dt-bindings for mt8192
Yunfei Dong
yunfei.dong at mediatek.com
Wed Dec 1 19:45:40 PST 2021
Adds decoder dt-bindings for mt8192.
Signed-off-by: Yunfei Dong <yunfei.dong at mediatek.com>
---
.../media/mediatek,vcodec-subdev-decoder.yaml | 266 ++++++++++++++++++
1 file changed, 266 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
new file mode 100644
index 000000000000..67cbcf8b3373
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
@@ -0,0 +1,266 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/mediatek,vcodec-subdev-decoder.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Mediatek Video Decode Accelerator With Multi Hardware
+
+maintainers:
+ - Yunfei Dong <yunfei.dong at mediatek.com>
+
+description: |
+ Mediatek Video Decode is the video decode hardware present in Mediatek
+ SoCs which supports high resolution decoding functionalities. Required
+ parent and child device node.
+
+ About the Decoder Hardware Block Diagram, please check below:
+
+ +---------------------------------+------------------------------------+
+ | | |
+ | input -> lat HW -> lat buffer --|--> lat buffer -> core HW -> output |
+ | || | || |
+ +------------||-------------------+---------------------||-------------+
+ lat workqueue | core workqueue <parent>
+ -------------||-----------------------------------------||------------------
+ || || <child>
+ \/ <----------------HW index-------------->\/
+ +------------------------------------------------------+
+ | enable/disable |
+ | clk power irq iommu |
+ | (lat/lat soc/core0/core1) |
+ +------------------------------------------------------+
+
+ As above, there are parent and child devices, child mean each hardware. The child device
+ controls the information of each hardware independent which include clk/power/irq.
+
+ There are two workqueues in parent device: lat workqueue and core workqueue. They are used
+ to lat and core hardware deocder. Lat workqueue need to get input bitstream and lat buffer,
+ then enable lat to decode, writing the result to lat buffer, dislabe hardware when lat decode
+ done. Core workqueue need to get lat buffer and output buffer, then enable core to decode,
+ writing the result to output buffer, disable hardware when core decode done. These two
+ hardwares will decode each frame cyclically.
+
+ For the smi common may not the same for each hardware, can't combine all hardware in one node,
+ or leading to iommu fault when access dram data.
+
+properties:
+ compatible:
+ const: mediatek,mt8192-vcodec-dec
+
+ reg:
+ maxItems: 1
+
+ iommus:
+ minItems: 1
+ maxItems: 32
+ description: |
+ List of the hardware port in respective IOMMU block for current Socs.
+ Refer to bindings/iommu/mediatek,iommu.yaml.
+
+ mediatek,scp:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ maxItems: 1
+ description: |
+ The node of system control processor (SCP), using
+ the remoteproc & rpmsg framework.
+ $ref: /schemas/remoteproc/mtk,scp.yaml
+
+ dma-ranges:
+ maxItems: 1
+ description: |
+ Describes the physical address space of IOMMU maps to memory.
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges: true
+
+# Required child node:
+patternProperties:
+ vcodec-lat:
+ type: object
+
+ properties:
+ compatible:
+ const: mediatek,mtk-vcodec-lat
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ iommus:
+ minItems: 1
+ maxItems: 32
+ description: |
+ List of the hardware port in respective IOMMU block for current Socs.
+ Refer to bindings/iommu/mediatek,iommu.yaml.
+
+ clocks:
+ maxItems: 5
+
+ clock-names:
+ items:
+ - const: sel
+ - const: soc-vdec
+ - const: soc-lat
+ - const: vdec
+ - const: top
+
+ assigned-clocks:
+ maxItems: 1
+
+ assigned-clock-parents:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ required:
+ - compatible
+ - reg
+ - interrupts
+ - iommus
+ - clocks
+ - clock-names
+ - assigned-clocks
+ - assigned-clock-parents
+ - power-domains
+
+ additionalProperties: false
+
+ vcodec-core:
+ type: object
+
+ properties:
+ compatible:
+ const: mediatek,mtk-vcodec-core
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ iommus:
+ minItems: 1
+ maxItems: 32
+ description: |
+ List of the hardware port in respective IOMMU block for current Socs.
+ Refer to bindings/iommu/mediatek,iommu.yaml.
+
+ clocks:
+ maxItems: 5
+
+ clock-names:
+ items:
+ - const: sel
+ - const: soc-vdec
+ - const: soc-lat
+ - const: vdec
+ - const: top
+
+ assigned-clocks:
+ maxItems: 1
+
+ assigned-clock-parents:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ required:
+ - compatible
+ - reg
+ - interrupts
+ - iommus
+ - clocks
+ - clock-names
+ - assigned-clocks
+ - assigned-clock-parents
+ - power-domains
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - iommus
+ - mediatek,scp
+ - dma-ranges
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/memory/mt8192-larb-port.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/mt8192-clk.h>
+ #include <dt-bindings/power/mt8192-power.h>
+
+ video-codec at 16000000 {
+ compatible = "mediatek,mt8192-vcodec-dec";
+ mediatek,scp = <&scp>;
+ iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>;
+ dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x16000000 0x40000>;
+ reg = <0x16000000 0x1000>; /* VDEC_SYS */
+ vcodec-lat at 10000 {
+ compatible = "mediatek,mtk-vcodec-lat";
+ reg = <0x10000 0x800>;
+ interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH 0>;
+ iommus = <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD_EXT>,
+ <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD2_EXT>,
+ <&iommu0 M4U_PORT_L5_VDEC_LAT0_AVC_MV_EXT>,
+ <&iommu0 M4U_PORT_L5_VDEC_LAT0_PRED_RD_EXT>,
+ <&iommu0 M4U_PORT_L5_VDEC_LAT0_TILE_EXT>,
+ <&iommu0 M4U_PORT_L5_VDEC_LAT0_WDMA_EXT>,
+ <&iommu0 M4U_PORT_L5_VDEC_LAT0_RG_CTRL_DMA_EXT>,
+ <&iommu0 M4U_PORT_L5_VDEC_UFO_ENC_EXT>;
+ clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+ <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
+ <&vdecsys_soc CLK_VDEC_SOC_LAT>,
+ <&vdecsys_soc CLK_VDEC_SOC_LARB1>,
+ <&topckgen CLK_TOP_MAINPLL_D4>;
+ clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
+ assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
+ power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>;
+ };
+
+ vcodec-core at 25000 {
+ compatible = "mediatek,mtk-vcodec-core";
+ reg = <0x25000 0x1000>;
+ interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>;
+ iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>,
+ <&iommu0 M4U_PORT_L4_VDEC_UFO_EXT>,
+ <&iommu0 M4U_PORT_L4_VDEC_PP_EXT>,
+ <&iommu0 M4U_PORT_L4_VDEC_PRED_RD_EXT>,
+ <&iommu0 M4U_PORT_L4_VDEC_PRED_WR_EXT>,
+ <&iommu0 M4U_PORT_L4_VDEC_PPWRAP_EXT>,
+ <&iommu0 M4U_PORT_L4_VDEC_TILE_EXT>,
+ <&iommu0 M4U_PORT_L4_VDEC_VLD_EXT>,
+ <&iommu0 M4U_PORT_L4_VDEC_VLD2_EXT>,
+ <&iommu0 M4U_PORT_L4_VDEC_AVC_MV_EXT>,
+ <&iommu0 M4U_PORT_L4_VDEC_RG_CTRL_DMA_EXT>;
+ clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+ <&vdecsys CLK_VDEC_VDEC>,
+ <&vdecsys CLK_VDEC_LAT>,
+ <&vdecsys CLK_VDEC_LARB1>,
+ <&topckgen CLK_TOP_MAINPLL_D4>;
+ clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
+ assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
+ power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>;
+ };
+ };
--
2.25.1
More information about the linux-arm-kernel
mailing list