(EXT) Re: [PATCH 1/1] thermal: imx8mm: enable ADC when enabling monitor

[Daniel Lezcano]

On 01/12/2021 15:45, Alexander Stein wrote:
> Am Dienstag, dem 30.11.2021 um 15:49 +0100 schrieb Daniel Lezcano:
>> On 22/11/2021 12:42, Alexander Stein wrote:
>>> From: Paul Gerber <
>>> Paul.Gerber at tq-group.com
>>>>
>>>
>>> The i.MX 8MP has a ADC_PD bit in the TMU_TER register that controls
>>> the
>>> operating mode of the ADC:
>>> * 0 means normal operating mode
>>> * 1 means power down mode
>>>
>>> When enabling/disabling the TMU, the ADC operating mode must be set
>>> accordingly.
>>>
>>> i.MX 8M Mini & Nano are lacking this bit.
>>>
>>> Signed-off-by: Paul Gerber <
>>> Paul.Gerber at tq-group.com
>>>>
>>> Signed-off-by: Alexander Stein <
>>> alexander.stein at ew.tq-group.com
>>>>
>>> ---
>>> Often this bit is set already by the bootloader, but in case this
>>> is not
>>> done, the file /sys/class/thermal/thermal_zone0/temp will always
>>> return
>>> -EAGAIN.
>>
>> Does it deserve a Fixes tag?
> 
> The more I think about it, the more I'm inclined to add one.
> Please tell me if I shall iterate v2 adding a Fixes tag (or other
> changes)

It is not necessary to send a V2 as the commit log will have a link to
this thread. Just answer with the Fixes tag, I'll add it myself to the
change log.



-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog