[RFC V2 1/2] media: hantro: Add support for i.MX8M Mini

[Adam Ford]

On Wed, Dec 1, 2021 at 6:25 AM Ezequiel Garcia
<ezequiel at vanguardiasur.com.ar> wrote:
>
> Hi Adam,
>
> On Tue, 30 Nov 2021 at 22:33, Adam Ford <aford173 at gmail.com> wrote:
> >
> > The i.MX8M Mini has a similar implementation of the Hantro G1 and
> > h decoders, but the Mini uses the vpu-blk-ctrl for handling the
> > VPU resets through the power domain system.  As such, there are
> > functions present in the 8MQ that are not applicable to the Mini
> > which requires the driver to have a different compatible flags.
> >
> > Signed-off-by: Adam Ford <aford173 at gmail.com>
> >
> > diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
> > index fb82b9297a2b..2aa1c520be50 100644
> > --- a/drivers/staging/media/hantro/hantro_drv.c
> > +++ b/drivers/staging/media/hantro/hantro_drv.c
> > @@ -592,6 +592,8 @@ static const struct of_device_id of_hantro_match[] = {
> >         { .compatible = "rockchip,rk3399-vpu", .data = &rk3399_vpu_variant, },
> >  #endif
> >  #ifdef CONFIG_VIDEO_HANTRO_IMX8M
> > +       { .compatible = "nxp,imx8mm-vpu", .data = &imx8mm_vpu_variant, },
> > +       { .compatible = "nxp,imx8mm-vpu-g2", .data = &imx8mm_vpu_g2_variant },
> >         { .compatible = "nxp,imx8mq-vpu", .data = &imx8mq_vpu_variant, },
> >         { .compatible = "nxp,imx8mq-vpu-g2", .data = &imx8mq_vpu_g2_variant },
> >  #endif
> > diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
> > index 267a6d33a47b..ae7c3fff760c 100644
> > --- a/drivers/staging/media/hantro/hantro_hw.h
> > +++ b/drivers/staging/media/hantro/hantro_hw.h
> > @@ -211,6 +211,8 @@ enum hantro_enc_fmt {
> >         ROCKCHIP_VPU_ENC_FMT_UYVY422 = 3,
> >  };
> >
> > +extern const struct hantro_variant imx8mm_vpu_g2_variant;
> > +extern const struct hantro_variant imx8mm_vpu_variant;
> >  extern const struct hantro_variant imx8mq_vpu_g2_variant;
> >  extern const struct hantro_variant imx8mq_vpu_variant;
> >  extern const struct hantro_variant px30_vpu_variant;
> > diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c
> > index ea919bfb9891..c68516c00c6d 100644
> > --- a/drivers/staging/media/hantro/imx8m_vpu_hw.c
> > +++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c
> > @@ -242,6 +242,32 @@ static const struct hantro_codec_ops imx8mq_vpu_g2_codec_ops[] = {
> >         },
> >  };
> >
> > +static const struct hantro_codec_ops imx8mm_vpu_codec_ops[] = {
> > +       [HANTRO_MODE_MPEG2_DEC] = {
> > +               .run = hantro_g1_mpeg2_dec_run,
> > +               .init = hantro_mpeg2_dec_init,
> > +               .exit = hantro_mpeg2_dec_exit,
> > +       },
> > +       [HANTRO_MODE_VP8_DEC] = {
> > +               .run = hantro_g1_vp8_dec_run,
> > +               .init = hantro_vp8_dec_init,
> > +               .exit = hantro_vp8_dec_exit,
> > +       },
> > +       [HANTRO_MODE_H264_DEC] = {
> > +               .run = hantro_g1_h264_dec_run,
> > +               .init = hantro_h264_dec_init,
> > +               .exit = hantro_h264_dec_exit,
> > +       },
> > +};
> > +
> > +static const struct hantro_codec_ops imx8mm_vpu_g2_codec_ops[] = {
> > +       [HANTRO_MODE_HEVC_DEC] = {
> > +               .run = hantro_g2_hevc_dec_run,
> > +               .init = hantro_hevc_dec_init,
> > +               .exit = hantro_hevc_dec_exit,
> > +       },
> > +};
> > +
>
> I believe you are missing VP9, which explains why you get
> a zero fluster score.

That's what I was thinking too and that's why I was wondering if I
should wait on G2 until more of those G2 patches have been finalized
and accepted.  Is there a way to test the HEVC?  I didn't see one in
the fluster list.

adam
>
> Thanks,
> Ezequiel