[PATCH 04/13] ASoC: dt-bindings: tegra: Few more Tegra210 AHUB modules
Sameer Pujar
spujar at nvidia.com
Fri Aug 27 02:33:50 PDT 2021
This patch adds YAML schema for DT bindings of few AHUB modules.
These devices will be registered as ASoC components and bindings
will be used on Tegra210 and later chips. The bindings for below
mentioned modules are added:
* SFC (Sampling Frequency Converter)
* MVC (Master Volume Control)
* AMX (Audio Multiplexer)
* ADX (Audio Demultiplexer)
* Mixer
Signed-off-by: Sameer Pujar <spujar at nvidia.com>
Cc: Rob Herring <robh+dt at kernel.org>
---
.../bindings/sound/nvidia,tegra210-adx.yaml | 74 ++++++++++++++++++++
.../bindings/sound/nvidia,tegra210-ahub.yaml | 20 ++++++
.../bindings/sound/nvidia,tegra210-amx.yaml | 72 ++++++++++++++++++++
.../bindings/sound/nvidia,tegra210-mixer.yaml | 67 ++++++++++++++++++
.../bindings/sound/nvidia,tegra210-mvc.yaml | 79 ++++++++++++++++++++++
.../bindings/sound/nvidia,tegra210-sfc.yaml | 76 +++++++++++++++++++++
6 files changed, 388 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml
new file mode 100644
index 0000000..9950585
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-adx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 ADX Device Tree Bindings
+
+description: |
+ The Audio Demultiplexer (ADX) block takes an input stream with up to
+ 16 channels and demultiplexes it into four output streams of up to 16
+ channels each. A byte RAM helps to form output frames by any combination
+ of bytes from the input frame. Its design is identical to that of byte
+ RAM in the AMX except that the data flow direction is reversed.
+
+maintainers:
+ - Jon Hunter <jonathanh at nvidia.com>
+ - Mohan Kumar <mkumard at nvidia.com>
+ - Sameer Pujar <spujar at nvidia.com>
+
+properties:
+ $nodename:
+ pattern: "^adx@[0-9a-f]*$"
+
+ compatible:
+ oneOf:
+ - const: nvidia,tegra210-adx
+ - items:
+ - enum:
+ - nvidia,tegra194-adx
+ - nvidia,tegra186-adx
+ - const: nvidia,tegra210-adx
+
+ reg:
+ maxItems: 1
+
+ sound-name-prefix:
+ pattern: "^ADX[1-9]$"
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ used as prefix for sink/source names of the component. Must be a
+ unique string among multiple instances of the same component.
+ The name can be "ADX1" or "ADX2" ... "ADXx", where x depends on
+ the maximum available instances on a Tegra SoC.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description: |
+ ADX has one input and four output. Accordingly ACIF (Audio Client
+ Interface) RX and TX port nodes are defined to represent ADX inputs
+ and output respectively. These are connected to corresponding ports
+ on AHUB.
+
+ patternProperties:
+ '^port@[0-9]':
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+
+ adx at 702d3800 {
+ compatible = "nvidia,tegra210-adx";
+ reg = <0x702d3800 0x100>;
+ sound-name-prefix = "ADX1";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
index 1118a94..4087eeb 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
@@ -85,6 +85,26 @@ patternProperties:
type: object
$ref: nvidia,tegra186-dspk.yaml#
+ '^mvc@[0-9a-f]+$':
+ type: object
+ $ref: nvidia,tegra210-mvc.yaml#
+
+ '^sfc@[0-9a-f]+$':
+ type: object
+ $ref: nvidia,tegra210-sfc.yaml#
+
+ '^amx@[0-9a-f]+$':
+ type: object
+ $ref: nvidia,tegra210-amx.yaml#
+
+ '^adx@[0-9a-f]+$':
+ type: object
+ $ref: nvidia,tegra210-adx.yaml#
+
+ '^mixer@[0-9a-f]+$':
+ type: object
+ $ref: nvidia,tegra210-mixer.yaml#
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml
new file mode 100644
index 0000000..e6b365b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-amx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 AMX Device Tree Bindings
+
+description: |
+ The Audio Multiplexer (AMX) block can multiplex up to four input streams
+ each of which can have maximum 16 channels and generate an output stream
+ with maximum 16 channels. A byte RAM helps to form an output frame by
+ any combination of bytes from the input frames.
+
+maintainers:
+ - Jon Hunter <jonathanh at nvidia.com>
+ - Mohan Kumar <mkumard at nvidia.com>
+ - Sameer Pujar <spujar at nvidia.com>
+
+properties:
+ $nodename:
+ pattern: "^amx@[0-9a-f]*$"
+
+ compatible:
+ oneOf:
+ - const: nvidia,tegra210-amx
+ - items:
+ - const: nvidia,tegra186-amx
+ - const: nvidia,tegra210-amx
+ - const: nvidia,tegra194-amx
+
+ reg:
+ maxItems: 1
+
+ sound-name-prefix:
+ pattern: "^AMX[1-9]$"
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ used as prefix for sink/source names of the component. Must be a
+ unique string among multiple instances of the same component.
+ The name can be "AMX1" or "AMX2" ... "AMXx", where x depends on
+ the maximum available instances on a Tegra SoC.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description: |
+ AMX has four inputs and one output. Accordingly ACIF (Audio Client
+ Interfaces) RX and TX port nodes are defined to represent AMX inputs
+ and output respectively. These are connected to corresponding ports
+ on AHUB.
+
+ patternProperties:
+ '^port@[0-9]':
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+
+ amx at 702d3000 {
+ compatible = "nvidia,tegra210-amx";
+ reg = <0x702d3000 0x100>;
+ sound-name-prefix = "AMX1";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml
new file mode 100644
index 0000000..0808355
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-mixer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 Mixer Device Tree Bindings
+
+description: |
+ The Mixer supports mixing of up to ten 7.1 audio input streams and
+ generate five outputs (each of which can be any combination of the
+ ten input streams).
+
+maintainers:
+ - Jon Hunter <jonathanh at nvidia.com>
+ - Mohan Kumar <mkumard at nvidia.com>
+ - Sameer Pujar <spujar at nvidia.com>
+
+properties:
+ $nodename:
+ pattern: "^mixer@[0-9a-f]*$"
+
+ compatible:
+ oneOf:
+ - const: nvidia,tegra210-amixer
+ - items:
+ - enum:
+ - nvidia,tegra194-amixer
+ - nvidia,tegra186-amixer
+ - const: nvidia,tegra210-amixer
+
+ reg:
+ maxItems: 1
+
+ sound-name-prefix:
+ const: "MIXER"
+ $ref: /schemas/types.yaml#/definitions/string
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description: |
+ Mixer has ten inputs and five outputs. Accordingly ACIF (Audio Client
+ Interfaces) RX and TX port nodes are defined to represent MIXER inputs
+ and outputs respectively. These are connected to corresponding ports
+ on AHUB.
+
+ patternProperties:
+ '^port@[0-9]':
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+
+ mixer at 702dbb00 {
+ compatible = "nvidia,tegra210-amixer";
+ reg = <0x702dbb00 0x800>;
+ sound-name-prefix = "MIXER";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml
new file mode 100644
index 0000000..7d81b11
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-mvc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 MVC Device Tree Bindings
+
+description: |
+ The Master Volume Control (MVC) provides gain or attenuation to a digital
+ signal path. It can be used in input or output signal path for per-stream
+ volume control or it can be used as master volume control. The MVC block
+ has one input and one output. The input digital stream can be mono or
+ multi-channel (up to 7.1 channels) stream. An independent mute control is
+ also included in the MVC block.
+
+maintainers:
+ - Jon Hunter <jonathanh at nvidia.com>
+ - Mohan Kumar <mkumard at nvidia.com>
+ - Sameer Pujar <spujar at nvidia.com>
+
+properties:
+ $nodename:
+ pattern: "^mvc@[0-9a-f]*$"
+
+ compatible:
+ oneOf:
+ - const: nvidia,tegra210-mvc
+ - items:
+ - enum:
+ - nvidia,tegra194-mvc
+ - nvidia,tegra186-mvc
+ - const: nvidia,tegra210-mvc
+
+ reg:
+ maxItems: 1
+
+ sound-name-prefix:
+ pattern: "^MVC[1-9]$"
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ used as prefix for sink/source names of the component. Must be a
+ unique string among multiple instances of the same component.
+ The name can be "MVC1" or "MVC2" ... "MVCx", where x depends on
+ the maximum available instances on a Tegra SoC.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
+ port at 0:
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
+ description: |
+ ACIF (Audio Client Interface) acting as MVC input (RX) port.
+ This is connected to corresponding ACIF port on AHUB.
+
+ port at 1:
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
+ description: |
+ ACIF (Audio Client Interface) acting as MVC output (TX) port.
+ This is connected to corresponding ACIF port on AHUB.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+
+ mvc at 702da000 {
+ compatible = "nvidia,tegra210-mvc";
+ reg = <0x702da000 0x200>;
+ sound-name-prefix = "MVC1";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml
new file mode 100644
index 0000000..5f05e2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-sfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 SFC Device Tree Bindings
+
+description: |
+ The Sampling Frequency Converter (SFC) converts the sampling frequency
+ of the input signal from one frequency to another. It supports sampling
+ frequency conversions of streams of up to two channels (stereo).
+
+maintainers:
+ - Jon Hunter <jonathanh at nvidia.com>
+ - Mohan Kumar <mkumard at nvidia.com>
+ - Sameer Pujar <spujar at nvidia.com>
+
+properties:
+ $nodename:
+ pattern: "^sfc@[0-9a-f]*$"
+
+ compatible:
+ oneOf:
+ - const: nvidia,tegra210-sfc
+ - items:
+ - enum:
+ - nvidia,tegra194-sfc
+ - nvidia,tegra186-sfc
+ - const: nvidia,tegra210-sfc
+
+ reg:
+ maxItems: 1
+
+ sound-name-prefix:
+ pattern: "^SFC[1-9]$"
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ used as prefix for sink/source names of the component. Must be a
+ unique string among multiple instances of the same component.
+ The name can be "SFC1" or "SFC2" ... "SFCx", where x depends on
+ the maximum available instances on a Tegra SoC.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
+ port at 0:
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
+ description: |
+ ACIF (Audio Client Interface) acting as SFC input (RX) port.
+ This is connected to corresponding ACIF port on AHUB.
+
+ port at 1:
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
+ description: |
+ ACIF (Audio Client Interface) acting as SFC output (TX) port.
+ This is connected to corresponding ACIF port on AHUB.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+
+ sfc at 702d2000 {
+ compatible = "nvidia,tegra210-sfc";
+ reg = <0x702d2000 0x200>;
+ sound-name-prefix = "SFC1";
+ };
+
+...
--
2.7.4
More information about the linux-arm-kernel
mailing list