[PATCH net-next v2 1/2] net: pcs: xpcs: enable skip xPCS soft reset
Wong Vee Khee
vee.khee.wong at linux.intel.com
Thu Aug 26 16:51:32 PDT 2021
Unlike any other platforms, Intel AlderLake-S uses Synopsys SerDes where
all the SerDes PLL configurations are controlled by the xPCS at the BIOS
level. If the driver perform a xPCS soft reset on initialization, these
settings will be switched back to the power on reset values.
This patch introduced a new xpcs_reset() function for drivers such as
sja1105 and stmmac to decide whether or not to perform a xPCS soft
reset.
Suggested-by: Vladimir Oltean <vladimir.oltean at nxp.com>
Cc: Vladimir Oltean <vladimir.oltean at nxp.com>
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit at intel.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong at linux.intel.com>
---
drivers/net/dsa/sja1105/sja1105_mdio.c | 6 ++-
.../net/ethernet/stmicro/stmmac/stmmac_mdio.c | 15 +++++++-
drivers/net/pcs/pcs-xpcs.c | 37 ++++++++++---------
include/linux/pcs/pcs-xpcs.h | 4 +-
include/linux/stmmac.h | 1 +
5 files changed, 40 insertions(+), 23 deletions(-)
diff --git a/drivers/net/dsa/sja1105/sja1105_mdio.c b/drivers/net/dsa/sja1105/sja1105_mdio.c
index 705d3900e43a..6f8cc1358ac0 100644
--- a/drivers/net/dsa/sja1105/sja1105_mdio.c
+++ b/drivers/net/dsa/sja1105/sja1105_mdio.c
@@ -435,13 +435,17 @@ static int sja1105_mdiobus_pcs_register(struct sja1105_private *priv)
goto out_pcs_free;
}
- xpcs = xpcs_create(mdiodev, priv->phy_mode[port]);
+ xpcs = xpcs_create(mdiodev);
if (IS_ERR(xpcs)) {
rc = PTR_ERR(xpcs);
goto out_pcs_free;
}
priv->xpcs[port] = xpcs;
+
+ rc = xpcs_reset(xpcs, priv->phy_mode[port]);
+ if (rc)
+ goto out_pcs_free;
}
priv->mdio_pcs = bus;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index a5d150c5f3d8..50f0e6dccb85 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -401,12 +401,15 @@ int stmmac_xpcs_setup(struct mii_bus *bus)
{
struct net_device *ndev = bus->priv;
struct mdio_device *mdiodev;
+ bool skip_xpcs_soft_reset;
struct stmmac_priv *priv;
struct dw_xpcs *xpcs;
int mode, addr;
+ int err;
priv = netdev_priv(ndev);
mode = priv->plat->phy_interface;
+ skip_xpcs_soft_reset = priv->plat->skip_xpcs_soft_reset;
/* Try to probe the XPCS by scanning all addresses. */
for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
@@ -414,12 +417,20 @@ int stmmac_xpcs_setup(struct mii_bus *bus)
if (IS_ERR(mdiodev))
continue;
- xpcs = xpcs_create(mdiodev, mode);
- if (IS_ERR_OR_NULL(xpcs)) {
+ xpcs = xpcs_create(mdiodev);
+ if (IS_ERR(xpcs)) {
mdio_device_free(mdiodev);
continue;
}
+ if (!skip_xpcs_soft_reset) {
+ err = xpcs_reset(xpcs, mode);
+ if (err) {
+ mdio_device_free(mdiodev);
+ continue;
+ }
+ }
+
priv->hw->xpcs = xpcs;
break;
}
diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index fb0a83dc09ac..e4961884dd96 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -252,6 +252,18 @@ static int xpcs_soft_reset(struct dw_xpcs *xpcs,
return xpcs_poll_reset(xpcs, dev);
}
+int xpcs_reset(struct dw_xpcs *xpcs, phy_interface_t interface)
+{
+ const struct xpcs_compat *compat;
+
+ compat = xpcs_find_compat(xpcs->id, interface);
+ if (!compat)
+ return -ENODEV;
+
+ return xpcs_soft_reset(xpcs, compat);
+}
+EXPORT_SYMBOL_GPL(xpcs_reset);
+
#define xpcs_warn(__xpcs, __state, __args...) \
({ \
if ((__state)->link) \
@@ -1084,12 +1096,11 @@ static const struct phylink_pcs_ops xpcs_phylink_ops = {
.pcs_link_up = xpcs_link_up,
};
-struct dw_xpcs *xpcs_create(struct mdio_device *mdiodev,
- phy_interface_t interface)
+struct dw_xpcs *xpcs_create(struct mdio_device *mdiodev)
{
struct dw_xpcs *xpcs;
u32 xpcs_id;
- int i, ret;
+ int i;
xpcs = kzalloc(sizeof(*xpcs), GFP_KERNEL);
if (!xpcs)
@@ -1099,37 +1110,27 @@ struct dw_xpcs *xpcs_create(struct mdio_device *mdiodev,
xpcs_id = xpcs_get_id(xpcs);
+ /* If Device ID are all ones, there is no device found */
+ if (xpcs_id == 0xffffffff)
+ goto out;
+
for (i = 0; i < ARRAY_SIZE(xpcs_id_list); i++) {
const struct xpcs_id *entry = &xpcs_id_list[i];
- const struct xpcs_compat *compat;
if ((xpcs_id & entry->mask) != entry->id)
continue;
xpcs->id = entry;
-
- compat = xpcs_find_compat(entry, interface);
- if (!compat) {
- ret = -ENODEV;
- goto out;
- }
-
xpcs->pcs.ops = &xpcs_phylink_ops;
xpcs->pcs.poll = true;
- ret = xpcs_soft_reset(xpcs, compat);
- if (ret)
- goto out;
-
return xpcs;
}
- ret = -ENODEV;
-
out:
kfree(xpcs);
- return ERR_PTR(ret);
+ return ERR_PTR(-ENODEV);
}
EXPORT_SYMBOL_GPL(xpcs_create);
diff --git a/include/linux/pcs/pcs-xpcs.h b/include/linux/pcs/pcs-xpcs.h
index add077a81b21..d841f55f12cc 100644
--- a/include/linux/pcs/pcs-xpcs.h
+++ b/include/linux/pcs/pcs-xpcs.h
@@ -35,8 +35,8 @@ void xpcs_validate(struct dw_xpcs *xpcs, unsigned long *supported,
struct phylink_link_state *state);
int xpcs_config_eee(struct dw_xpcs *xpcs, int mult_fact_100ns,
int enable);
-struct dw_xpcs *xpcs_create(struct mdio_device *mdiodev,
- phy_interface_t interface);
+int xpcs_reset(struct dw_xpcs *xpcs, phy_interface_t interface);
+struct dw_xpcs *xpcs_create(struct mdio_device *mdiodev);
void xpcs_destroy(struct dw_xpcs *xpcs);
#endif /* __LINUX_PCS_XPCS_H */
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index a6f03b36fc4f..0f901773c5e4 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -268,5 +268,6 @@ struct plat_stmmacenet_data {
int msi_rx_base_vec;
int msi_tx_base_vec;
bool use_phy_wol;
+ bool skip_xpcs_soft_reset;
};
#endif
--
2.25.1
More information about the linux-arm-kernel
mailing list