[PATCH v3 3/4] PCI/ACPI: Add Broadcom bcm2711 MCFG quirk

[Jeremy Linton]

Now that there is a bcm2711 quirk, it needs to be enabled when the
MCFG is missing. Use an ACPI namespace _DSD property
"linux-ecam-quirk-id" as an alternative to the MCFG OEM.

Signed-off-by: Jeremy Linton <jeremy.linton at arm.com>
Acked-by: Florian Fainelli <f.fainelli at gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas at google.com>
---
 drivers/acpi/pci_mcfg.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index 53cab975f612..04c517418365 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -169,6 +169,9 @@ static struct mcfg_fixup mcfg_quirks[] = {
 	ALTRA_ECAM_QUIRK(1, 13),
 	ALTRA_ECAM_QUIRK(1, 14),
 	ALTRA_ECAM_QUIRK(1, 15),
+
+	{ "bc2711", "", 0, 0, MCFG_BUS_ANY, &bcm2711_pcie_ops,
+	  DEFINE_RES_MEM(0xFD500000, 0xA000) },
 };
 
 static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
@@ -198,8 +201,22 @@ static void pci_mcfg_apply_quirks(struct acpi_pci_root *root,
 	u16 segment = root->segment;
 	struct resource *bus_range = &root->secondary;
 	struct mcfg_fixup *f;
+	const char *soc;
 	int i;
 
+	/*
+	 * This may be a machine with a PCI/SMC conduit, which means it doesn't
+	 * have an MCFG. Use an ACPI namespace definition instead.
+	 */
+	if (!fwnode_property_read_string(acpi_fwnode_handle(root->device),
+					 "linux-ecam-quirk-id", &soc)) {
+		if (strlen(soc) != ACPI_OEM_ID_SIZE)
+			dev_err(&root->device->dev, "ECAM quirk should be %d characters\n",
+				ACPI_OEM_ID_SIZE);
+		else
+			memcpy(mcfg_oem_id, soc, ACPI_OEM_ID_SIZE);
+	}
+
 	for (i = 0, f = mcfg_quirks; i < ARRAY_SIZE(mcfg_quirks); i++, f++) {
 		if (pci_mcfg_quirk_matches(f, segment, bus_range)) {
 			if (f->cfgres.start)
-- 
2.31.1