[PATCH] arm64: zynqmp: Wire psgtr for zc1751-xm013

[Michal Simek]

pá 6. 8. 2021 v 12:14 odesílatel Michal Simek <michal.simek at xilinx.com> napsal:
>
> Add psgtr description for SATA and USB.
>
> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
> ---
>
> Based on https://lore.kernel.org/r/cover.1628244703.git.michal.simek@xilinx.com
> ---
>  .../dts/xilinx/zynqmp-zc1751-xm017-dc3.dts    | 26 +++++++++++++++++++
>  1 file changed, 26 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
> index 4394ec3b6a23..381cc682cef9 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
> @@ -11,6 +11,7 @@
>
>  #include "zynqmp.dtsi"
>  #include "zynqmp-clk-ccf.dtsi"
> +#include <dt-bindings/phy/phy.h>
>
>  / {
>         model = "ZynqMP zc1751-xm017-dc3 RevA";
> @@ -37,6 +38,18 @@ memory at 0 {
>                 device_type = "memory";
>                 reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
>         };
> +
> +       clock_si5338_2: clk26 {
> +               compatible = "fixed-clock";
> +               #clock-cells = <0>;
> +               clock-frequency = <26000000>;
> +       };
> +
> +       clock_si5338_3: clk125 {
> +               compatible = "fixed-clock";
> +               #clock-cells = <0>;
> +               clock-frequency = <125000000>;
> +       };
>  };
>
>  &fpd_dma_chan1 {
> @@ -116,6 +129,13 @@ &nand0 {
>         num-cs = <2>;
>  };
>
> +&psgtr {
> +       status = "okay";
> +       /* usb3, sata */
> +       clocks = <&clock_si5338_2>, <&clock_si5338_3>;
> +       clock-names = "ref2", "ref3";
> +};
> +
>  &rtc {
>         status = "okay";
>  };
> @@ -131,6 +151,8 @@ &sata {
>         ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
>         ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
>         ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
> +       phy-names = "sata-phy";
> +       phys = <&psgtr 2 PHY_TYPE_SATA 0 3>;
>  };
>
>  &sdhci1 { /* emmc with some settings */
> @@ -149,6 +171,8 @@ &uart1 {
>
>  &usb0 {
>         status = "okay";
> +       phy-names = "usb3-phy";
> +       phys = <&psgtr 0 PHY_TYPE_USB3 0 2>;
>  };
>
>  &dwc3_0 {
> @@ -161,6 +185,8 @@ &dwc3_0 {
>  /* ULPI SMSC USB3320 */
>  &usb1 {
>         status = "okay";
> +       phy-names = "usb3-phy";
> +       phys = <&psgtr 3 PHY_TYPE_USB3 1 2>;
>  };
>
>  &dwc3_1 {
> --
> 2.32.0
>

Applied.
M

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs