[PATCH v7 3/5] dt-binding: mt8183: Add Mediatek MDP3 dt-bindings
Rob Herring
robh at kernel.org
Tue Aug 24 11:02:54 PDT 2021
On Tue, Aug 24, 2021 at 06:00:25PM +0800, Moudy Ho wrote:
> This patch adds DT binding document for Media Data Path 3 (MDP3)
> a unit in multimedia system used for scaling and color format convert.
>
> Signed-off-by: Moudy Ho <moudy.ho at mediatek.com>
> ---
> .../bindings/media/mediatek,mdp3-ccorr.yaml | 57 +++++
> .../bindings/media/mediatek,mdp3-rdma.yaml | 207 ++++++++++++++++++
> .../bindings/media/mediatek,mdp3-rsz.yaml | 65 ++++++
> .../bindings/media/mediatek,mdp3-wdma.yaml | 71 ++++++
> .../bindings/media/mediatek,mdp3-wrot.yaml | 71 ++++++
> 5 files changed, 471 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/mediatek,mdp3-ccorr.yaml
> create mode 100644 Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
> create mode 100644 Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
> create mode 100644 Documentation/devicetree/bindings/media/mediatek,mdp3-wdma.yaml
> create mode 100644 Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-ccorr.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-ccorr.yaml
> new file mode 100644
> index 000000000000..59fd68b46022
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-ccorr.yaml
> @@ -0,0 +1,57 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/mediatek,mdp3-ccorr.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek Media Data Path 3 CCORR Device Tree Bindings
> +
> +maintainers:
> + - Daoyuan Huang <daoyuan.huang at mediatek.com>
> + - Moudy Ho <moudy.ho at mediatek.com>
> +
> +description: |
> + One of Media Data Path 3 (MDP3) components used to do color correction with 3X3 matrix.
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - mediatek,mt8183-mdp3-ccorr
> +
> + mediatek,mdp3-id:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + maxItems: 1
> + description: |
> + HW index to distinguish same functionality modules.
If we wanted h/w indexes in DT, we'd have a standard property. Why do
you need this?
> +
> + reg:
> + description: |
> + Physical base address and length of the function block
> + register space, the number aligns with the component
> + and its own subcomponent.
Drop and add 'maxItems: 1'
> +
> + mediatek,gce-client-reg:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: |
> + sub-system id corresponding to the global command engine (GCE)
You mean 'phandle to GCE and sub-system id'?
> + register address.
> + $ref: /schemas/mailbox/mtk-gce.txt
Kind of looks like jsonschema but in the description and to a .txt
file...
> +
> + clocks:
> + minItems: 1
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8183-clk.h>
> + #include <dt-bindings/gce/mt8183-gce.h>
> +
> + mdp3_ccorr: mdp3_ccorr at 1401c000 {
> + compatible = "mediatek,mt8183-mdp3-ccorr";
> + mediatek,mdp3-id = <0>;
> + reg = <0x1401c000 0x1000>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xc000 0x1000>;
> + clocks = <&mmsys CLK_MM_MDP_CCORR>;
> + };
> diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
> new file mode 100644
> index 000000000000..b355d7fe791e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
> @@ -0,0 +1,207 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/mediatek,mdp3-rdma.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek Media Data Path 3 Device Tree Bindings
> +
> +maintainers:
> + - Daoyuan Huang <daoyuan.huang at mediatek.com>
> + - Moudy Ho <moudy.ho at mediatek.com>
> +
> +description: |
> + One of Media Data Path 3 (MDP3) components used to do read DMA.
> + RDMA0 is also used to be a controller node containing MMSYS,
> + MUTEX, GCE and SCP settings.
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
> + - enum:
Should be indented 2 more spaces. Install yamllint and check with 'make
dt_binding_check'.
> + # controller node
> + - mediatek,mt8183-mdp3
And then 2 more here.
> + - enum:
> + - mediatek,mt8183-mdp3-rdma
> +
> + - items:
> + - enum:
> + # read DMA
> + - mediatek,mt8183-mdp3-rdma
> +
> + mediatek,scp:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + maxItems: 1
> + description: |
> + The node of system control processor (SCP), using
> + the remoteproc & rpmsg framework.
> + $ref: /schemas/remoteproc/mtk,scp.yaml
> +
> + mediatek,mdp3-id:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + maxItems: 1
> + description: |
> + In MDP3, it can allocate multiple identical modules for
> + different data path selection or multi-pipeline execution.
> + This node is used to indicate the ID of each module.
> +
> + mdp3-comps:
> + $ref: /schemas/types.yaml#/definitions/string-array
> + items:
> + - enum:
And this is 2 too many spaces...
> + # MDP direct-link input path selection, create a
> + # component for path connectedness of HW pipe control
> + - mediatek,mt8183-mdp3-dl1
> + - enum:
> + - mediatek,mt8183-mdp3-dl2
> + - enum:
> + # MDP direct-link output path selection, create a
> + # component for path connectedness of HW pipe control
> + - mediatek,mt8183-mdp3-path1
> + - enum:
> + - mediatek,mt8183-mdp3-path2
> + - enum:
> + # Input DMA of ISP PASS2 (DIP) module for raw image input
> + - mediatek,mt8183-mdp3-imgi
> + - enum:
> + # Output DMA of ISP PASS2 (DIP) module for YUV image output
> + - mediatek,mt8183-mdp3-exto
> +
> + mdp3-comp-ids:
> + maxItems: 1
> + $ref: /schemas/types.yaml#/definitions/uint32-array
If only a single item, then it's a 'uint32' not an array.
> + description: |
> + Pipeline ID of MDP direct-link or DIP.
> +
> + reg:
> + description: |
> + Physical base address and length of the function block
> + register space, the number aligns with the component
> + and its own subcomponent.
> +
> + mediatek,gce-client-reg:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: |
> + sub-system id corresponding to the global command engine (GCE)
> + register address.
> + $ref: /schemas/mailbox/mtk-gce.txt
> +
> + power-domains:
> + maxItems: 1
> +
> + clocks:
> + minItems: 1
> + maxItems: 6
Need to define what they are.
> +
> + iommus:
> + $ref: /schemas/types.yaml#/definitions/phandle
iommus already has a type definition.
> + description: |
> + Should point to the respective IOMMU block with master
> + port as argument.
> + $ref: /schemas/iommu/mediatek,iommu.yaml
No. Drop (the whole description because you don't need generic
descriptions for common properties).
What's needed is how many entries (maxItems: 1).
> +
> + mediatek,mmsys:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + maxItems: 1
> + description: |
> + The node of mux(multiplexer) controller for HW connections.
> +
> + mediatek,mm-mutex:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + maxItems: 1
> + description: |
> + The node of sof(start of frame) signal controller.
> +
> + mediatek,mailbox-gce:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: |
> + The node of global command engine (GCE), used to read/write
> + registers with critical time limitation.
> + $ref: /schemas/mailbox/mtk-gce.txt
> +
> + mboxes:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: |
> + $ref: /schemas/mailbox/mailbox.txt
> +
> + gce-subsys:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: |
> + sub-system id corresponding to the global command engine (GCE)
> + register address.
> + $ref: /schemas/mailbox/mtk-gce.txt
> +
> +if:
> + properties:
> + compatible:
> + items:
> + - enum:
> + - mediatek,mt8183-mdp3
> + - enum:
> + - mediatek,mt8183-mdp3-rdma
Normally, you want to use 'contains' for if/then schemas:
compatible:
contains:
const: mediatek,mt8183-mdp3
> +
> +then:
> + required:
> + - mediatek,scp
> + - mediatek,mmsys
> + - mediatek,mm-mutex
> + - mediatek,mailbox-gce
> + - mboxes
> + - gce-subsys
> +
> +required:
> + - compatible
> + - mediatek,mdp3-id
> + - reg
> + - clocks
> + - mediatek,gce-client-reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8183-clk.h>
> + #include <dt-bindings/gce/mt8183-gce.h>
> + #include <dt-bindings/power/mt8183-power.h>
> + #include <dt-bindings/memory/mt8183-larb-port.h>
> +
> + mdp3_rdma0: mdp3_rdma0 at 14001000 {
> + compatible = "mediatek,mt8183-mdp3",
> + "mediatek,mt8183-mdp3-rdma";
> + mediatek,scp = <&scp>;
> + mediatek,mdp3-id = <0>;
> + mdp3-comps = "mediatek,mt8183-mdp3-dl1", "mediatek,mt8183-mdp3-dl2",
> + "mediatek,mt8183-mdp3-path1", "mediatek,mt8183-mdp3-path2",
> + "mediatek,mt8183-mdp3-imgi", "mediatek,mt8183-mdp3-exto";
> + mdp3-comp-ids = <0 1 0 1 0 1>;
> + reg = <0x14001000 0x1000>,
> + <0x14000000 0x1000>,
> + <0x14005000 0x1000>,
> + <0x14006000 0x1000>,
> + <0x15020000 0x1000>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>,
> + <&gce SUBSYS_1400XXXX 0 0x1000>,
> + <&gce SUBSYS_1400XXXX 0x5000 0x1000>,
> + <&gce SUBSYS_1400XXXX 0x6000 0x1000>,
> + <&gce SUBSYS_1502XXXX 0 0x1000>;
> + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
> + clocks = <&mmsys CLK_MM_MDP_RDMA0>,
> + <&mmsys CLK_MM_MDP_RSZ1>,
> + <&mmsys CLK_MM_MDP_DL_TXCK>,
> + <&mmsys CLK_MM_MDP_DL_RX>,
> + <&mmsys CLK_MM_IPU_DL_TXCK>,
> + <&mmsys CLK_MM_IPU_DL_RX>;
> + iommus = <&iommu>;
> + mediatek,mmsys = <&mmsys>;
> + mediatek,mm-mutex = <&mutex>;
> + mediatek,mailbox-gce = <&gce>;
> + mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>,
> + <&gce 21 CMDQ_THR_PRIO_LOWEST 0>,
> + <&gce 22 CMDQ_THR_PRIO_LOWEST 0>,
> + <&gce 23 CMDQ_THR_PRIO_LOWEST 0>;
> + gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
> + <&gce 0x14010000 SUBSYS_1401XXXX>,
> + <&gce 0x14020000 SUBSYS_1402XXXX>,
> + <&gce 0x15020000 SUBSYS_1502XXXX>;
> + };
> \ No newline at end of file
Fix this.
Similar comments on the rest.
Rob
More information about the linux-arm-kernel
mailing list