[PATCH 1/6] mmc: sdhci-esdhc-imx: remove redundant code for manual tuning

Ulf Hansson ulf.hansson at linaro.org
Tue Aug 24 06:52:33 PDT 2021


On Mon, 16 Aug 2021 at 15:00, <haibo.chen at nxp.com> wrote:
>
> From: Haibo Chen <haibo.chen at nxp.com>
>
> For manual tuning method, already call esdhc_prepare_tuning()
> config the necessary registers, so remove the redundant code
> in esdhc_writew_le() for SDHCI_HOST_CONTROL2.
>
> Signed-off-by: Haibo Chen <haibo.chen at nxp.com>

While discussions on the DT binding, etc, continue with Lucas and Rob
on patch 3 - do you want me to apply patch1 and patch2?

Kind regards
Uffe

> ---
>  drivers/mmc/host/sdhci-esdhc-imx.c | 12 +-----------
>  1 file changed, 1 insertion(+), 11 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
> index 57b19ca1ad6d..a49fac719fca 100644
> --- a/drivers/mmc/host/sdhci-esdhc-imx.c
> +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
> @@ -628,17 +628,7 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
>                 else
>                         new_val &= ~ESDHC_VENDOR_SPEC_VSELECT;
>                 writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC);
> -               if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) {
> -                       new_val = readl(host->ioaddr + ESDHC_MIX_CTRL);
> -                       if (val & SDHCI_CTRL_TUNED_CLK) {
> -                               new_val |= ESDHC_MIX_CTRL_SMPCLK_SEL;
> -                               new_val |= ESDHC_MIX_CTRL_AUTO_TUNE_EN;
> -                       } else {
> -                               new_val &= ~ESDHC_MIX_CTRL_SMPCLK_SEL;
> -                               new_val &= ~ESDHC_MIX_CTRL_AUTO_TUNE_EN;
> -                       }
> -                       writel(new_val , host->ioaddr + ESDHC_MIX_CTRL);
> -               } else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) {
> +               if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) {
>                         u32 v = readl(host->ioaddr + SDHCI_AUTO_CMD_STATUS);
>                         u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL);
>                         if (val & SDHCI_CTRL_TUNED_CLK) {
> --
> 2.17.1
>



More information about the linux-arm-kernel mailing list