[PATCH v2 1/4] ASoC: rockchip: add support for i2s-tdm controller

[Philipp Zabel]

Hi Nicolas,

On Mon, 2021-08-23 at 16:35 +0200, Nicolas Frattaroli wrote:
[...]
> > I'm not too fond of reimplementing half a reset controller in here.
> > The reset framework does not support synchronized (de)assertion of
> > multiple reset controls, I wonder if this would be useful to add.
> > Without having thought about this too hard, I could imagine this as an
> > extension to the bulk API, or possibly a call to join multiple reset
> > controls into a reset control array.
> 
> I agree, the code required for synchronised reset seems to be a good
> candidate for a generalised solution elsewhere.
> However, I'm not sure if I'm the right candidate to design this API
> as my first kernel contribution when the board I'm currently testing
> this with doesn't even utilise the synchronized reset.
> 
> If I come across an opportunity to test synchronised resets, I'll
> definitely look into refactoring this. I'd also be happy to hear of
> any other driver which is currently implementing its own synchronised
> reset.
[...] 
> > What is the reason for the different delays in
> > rockchip_snd_xfer_sync_reset() and rockchip_snd_reset()?
> > 
> 
> Simply put: I have no idea. This is what downstream does, and it
> appears to work for me. The git history of the downstream kernel
> also doesn't tell me anything about why the sync reset is 150
> and this one is 1.
> 
> I've got no device to test the sync reset with at the moment so
> I'm wary of playing with the delay value.

Fair points. You could remove the untested synchronized reset support
for now; that would allow to get rid of the rockchip,cru device tree
property, which is only required to let this driver access the CRU
registers behind the clock/reset controller driver's back.

[...]
> > > +	if (i2s_tdm->clk_trcm != TRCM_TXRX) {
> > > +		cru_node = of_parse_phandle(node, "rockchip,cru", 0);
> > > +		i2s_tdm->cru_base = of_iomap(cru_node, 0);
> > 
> > This is a bit ugly if there is another driver sitting on the
> > rockchip,cru compatible node. Which reset controller driver is backing
> > the reset controls below?
> 
> I'm not sure if I understand the question (I only just today learned that
> reset controls have drivers) but I think the reset it is using in the
> Quartz64 dts is backed by rk3568-cru. Let me know if I misunderstood you.

That's the one, thanks.

The devm_reset_control_get() calls below follow the "reset-names"
and "resets" device tree properties. Those point (&cru) to a
clock-controller node with compatible = "rockchip,rk3568-cru".

The corresponding driver is drivers/clk/rockchip/clk-rk3568.c,
so the reset controller is provided by the reset_controller_register()
call in drivers/clk/rockchip/softrst.c.

regards
Philipp