[PATCH v5 4/5] ARM: dts: NSP: Add DT files for Meraki MX65 series

[Florian Fainelli]

On Fri,  6 Aug 2021 21:44:35 +0100, Matthew Hagan <mnhagan88 at gmail.com> wrote:
> MX65 & MX65W Hardware info:
>   - CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
>   - RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
>   - Storage: 1 GB (Micron MT29F8G08ABACA)
>   - Networking: BCM58625 switch (2x 1GbE ports)
>     2x Qualcomm QCA8337 switches (10x 1GbE ports total)
>   - PSE: Broadcom BCM59111KMLG connected to LAN ports 11 & 12
>   - USB: 1x USB2.0
>   - Serial: Internal header
>   - WLAN(MX65W Only): 2x Broadcom BCM43520KMLG on the PCI bus.
> 
> Note that a driver and firmware image for the BCM59111 PSE has been
> released under GPL, but this is not present in the kernel.
> 
> Signed-off-by: Matthew Hagan <mnhagan88 at gmail.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/master, thanks!
--
Florian