[PATCH v5 3/5] ARM: dts: NSP: Add DT files for Meraki MX64 series

[Florian Fainelli]

On Fri,  6 Aug 2021 21:44:34 +0100, Matthew Hagan <mnhagan88 at gmail.com> wrote:
> MX64 & MX64W Hardware info:
>   - CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
>   - RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
>   - Storage: 1 GB (Micron MT29F8G08ABACA)
>   - Networking: BCM58625 internal switch (5x 1GbE ports)
>   - USB: 1x USB2.0
>   - Serial: Internal header
>   - WLAN(MX64W only): 2x Broadcom BCM43520KMLG on the PCI bus
> 
> This patch adds the Meraki MX64 series-specific bindings. Since some
> devices make use of the older A0 SoC, changes need to be made to
> accommodate this case, including removal of coherency options and
> modification to the secondary-boot-reg.
> 
> Signed-off-by: Matthew Hagan <mnhagan88 at gmail.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/master, thanks!
--
Florian