[PATCH v2 0/4] CM4 ACPI PCIe quirk

[Bjorn Helgaas]

On Thu, Aug 19, 2021 at 04:56:51PM -0500, Jeremy Linton wrote:
> The PFTF CM4 is an ACPI platform that is following the Arm PCIe SMC
> (DEN0115) standard because its PCIe config space isn't ECAM compliant
> since it is split into two parts. One part describes the root port
> registers, and another contains a moveable window pointing at a given
> device's 4K config space. Thus it doesn't have an MCFG table. As
> Linux doesn't support the PCI/SMC, a host bridge specific _DSD is
> added and associated with custom ECAM ops and cfgres.  The custom cfg
> op selects between those two regions, as well as disallowing
> problematic accesses.
> 
> V1->V2:
> 	Only move register definitions to new .h file, add
> 	     include guards.
> 	Change quirk namespace identifier.
> 	Update Maintainers file.
> 	A number of whitespace, grammar, etc fixes.
> 
> 
> Jeremy Linton (4):
>   PCI: brcmstb: Break register definitions into separate header
>   PCI: brcmstb: Add ACPI config space quirk
>   PCI/ACPI: Add Broadcom bcm2711 MCFG quirk
>   MAINTAINERS: Widen brcmstb PCIe file scope
> 
>  MAINTAINERS                                |   2 +-
>  drivers/acpi/pci_mcfg.c                    |  13 ++
>  drivers/pci/controller/Makefile            |   1 +
>  drivers/pci/controller/pcie-brcmstb-acpi.c |  74 ++++++++++
>  drivers/pci/controller/pcie-brcmstb.c      | 150 +-------------------
>  drivers/pci/controller/pcie-brcmstb.h      | 155 +++++++++++++++++++++
>  include/linux/pci-ecam.h                   |   1 +
>  7 files changed, 247 insertions(+), 149 deletions(-)
>  create mode 100644 drivers/pci/controller/pcie-brcmstb-acpi.c
>  create mode 100644 drivers/pci/controller/pcie-brcmstb.h

I'm fine with all of these, given the minor comments I made.

Lorenzo, if you want to pick this up after Jeremy updates it:

Acked-by: Bjorn Helgaas <bhelgaas at google.com>