[PATCH v2 0/9] ARM: prepare and add colibri imx6ull 1gb (emmc) support

Marcel Ziswiler marcel at ziswiler.com
Thu Aug 19 15:09:01 PDT 2021


From: Marcel Ziswiler <marcel.ziswiler at toradex.com>


Clean-up imx_v6_v7_defconfig and then add support for the new Colibri
iMX6ULL 1GB (eMMC) which builds on the success of the existing Colibri
iMX6ULL SKUs using raw NAND but replaces this with more RAM (1 GB) and
an eMMC (4 GB).

Changes in v2:
- New patch cleaning-up dt-bindings documentation.
- Fix indentation.
- Use latest agreed upon SPDX-License-Identifier GPL-2.0+ OR MIT.
- Drop AG in our copyright statement as recommended by our legal.
- New patch documenting dt-bindings.

Marcel Ziswiler (8):
  ARM: imx_v6_v7_defconfig: enable mtd physmap
  ARM: imx_v6_v7_defconfig: enable fb
  ARM: imx_v6_v7_defconfig: change snd soc tlv320aic3x to i2c variant
  ARM: imx_v6_v7_defconfig: rebuild default configuration
  ARM: imx_v6_v7_defconfig: build imx sdma driver as module
  ARM: imx_v6_v7_defconfig: enable bpf syscall and cgroup bpf
  dt-bindings: arm: fsl: clean-up all toradex boards/modules
  dt-bindings: arm: fsl: add toradex,colibri-imx6ull-emmc

Max Krummenacher (1):
  ARM: dts: colibri-imx6ull-emmc: add device tree

 .../devicetree/bindings/arm/fsl.yaml          |  87 ++++----
 arch/arm/boot/dts/Makefile                    |   1 +
 .../boot/dts/imx6ull-colibri-emmc-eval-v3.dts |  17 ++
 .../dts/imx6ull-colibri-emmc-nonwifi.dtsi     | 185 ++++++++++++++++++
 arch/arm/boot/dts/imx6ull-colibri.dtsi        |  32 ++-
 arch/arm/configs/imx_v6_v7_defconfig          |  46 ++---
 6 files changed, 299 insertions(+), 69 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts
 create mode 100644 arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi

-- 
2.26.2




More information about the linux-arm-kernel mailing list