[PATCH net-next v2 2/2] arm64: dts: sparx5: Add the Sparx5 switch frame DMA support

[Steen Hegelund]

This adds the interrupt for the Sparx5 Frame DMA.

If this configuration is present the Sparx5 SwitchDev driver will use the
Frame DMA feature, and if not it will use register based injection and
extraction for sending and receiving frames to the CPU.

Signed-off-by: Steen Hegelund <steen.hegelund at microchip.com>
---
 arch/arm64/boot/dts/microchip/sparx5.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
index ad07fff40544..787ebcec121d 100644
--- a/arch/arm64/boot/dts/microchip/sparx5.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi
@@ -471,8 +471,9 @@ switch: switch at 0x600000000 {
 				<0x6 0x10004000 0x7fc000>,
 				<0x6 0x11010000 0xaf0000>;
 			reg-names = "cpu", "dev", "gcb";
-			interrupt-names = "xtr";
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "xtr", "fdma";
+			interrupts =	<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 			resets = <&reset 0>;
 			reset-names = "switch";
 		};
-- 
2.32.0