[PATCH] KVM: arm64: vgic: Resample HW pending state on deactivation
Marc Zyngier
maz at kernel.org
Wed Aug 18 14:24:38 PDT 2021
On Wed, 18 Aug 2021 20:40:42 +0100,
Oliver Upton <oupton at google.com> wrote:
>
> Hey Marc,
>
> On Wed, Aug 18, 2021 at 12:05 PM Raghavendra Rao Ananta
> <rananta at google.com> wrote:
> >
> > On Wed, Aug 18, 2021 at 11:14 AM Marc Zyngier <maz at kernel.org> wrote:
> > >
> > > When a mapped level interrupt (a timer, for example) is deactivated
> > > by the guest, the corresponding host interrupt is equally deactivated.
> > > However, the fate of the pending state still needs to be dealt
> > > with in SW.
> > >
> > > This is specially true when the interrupt was in the active+pending
> > > state in the virtual distributor at the point where the guest
> > > was entered. On exit, the pending state is potentially stale
> > > (the guest may have put the interrupt in a non-pending state).
> > >
> > > If we don't do anything, the interrupt will be spuriously injected
> > > in the guest. Although this shouldn't have any ill effect (spurious
> > > interrupts are always possible), we can improve the emulation by
> > > detecting the deactivation-while-pending case and resample the
> > > interrupt.
> > >
> > > Fixes: e40cc57bac79 ("KVM: arm/arm64: vgic: Support level-triggered mapped interrupts")
> > > Reported-by: Raghavendra Rao Ananta <rananta at google.com>
> > > Signed-off-by: Marc Zyngier <maz at kernel.org>
> > > Cc: stable at vger.kernel.org
> > > ---
> > > arch/arm64/kvm/vgic/vgic-v2.c | 25 ++++++++++++++++++-------
> > > arch/arm64/kvm/vgic/vgic-v3.c | 25 ++++++++++++++++++-------
> > > 2 files changed, 36 insertions(+), 14 deletions(-)
> > >
> > Tested-by: Raghavendra Rao Ananta <rananta at google.com>
> >
> > Thanks,
> > Raghavendra
> > > diff --git a/arch/arm64/kvm/vgic/vgic-v2.c b/arch/arm64/kvm/vgic/vgic-v2.c
> > > index 2c580204f1dc..3e52ea86a87f 100644
> > > --- a/arch/arm64/kvm/vgic/vgic-v2.c
> > > +++ b/arch/arm64/kvm/vgic/vgic-v2.c
> > > @@ -60,6 +60,7 @@ void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu)
> > > u32 val = cpuif->vgic_lr[lr];
> > > u32 cpuid, intid = val & GICH_LR_VIRTUALID;
> > > struct vgic_irq *irq;
> > > + bool deactivated;
> > >
> > > /* Extract the source vCPU id from the LR */
> > > cpuid = val & GICH_LR_PHYSID_CPUID;
> > > @@ -75,7 +76,8 @@ void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu)
> > >
> > > raw_spin_lock(&irq->irq_lock);
> > >
> > > - /* Always preserve the active bit */
> > > + /* Always preserve the active bit, note deactivation */
> > > + deactivated = irq->active && !(val & GICH_LR_ACTIVE_BIT);
> > > irq->active = !!(val & GICH_LR_ACTIVE_BIT);
> > >
> > > if (irq->active && vgic_irq_is_sgi(intid))
> > > @@ -105,6 +107,12 @@ void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu)
> > > * device state could have changed or we simply need to
> > > * process the still pending interrupt later.
> > > *
> > > + * We could also have entered the guest with the interrupt
> > > + * active+pending. On the next exit, we need to re-evaluate
> > > + * the pending state, as it could otherwise result in a
> > > + * spurious interrupt by injecting a now potentially stale
> > > + * pending state.
> > > + *
> > > * If this causes us to lower the level, we have to also clear
> > > * the physical active state, since we will otherwise never be
> > > * told when the interrupt becomes asserted again.
> > > @@ -115,12 +123,15 @@ void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu)
> > > if (vgic_irq_is_mapped_level(irq)) {
> > > bool resample = false;
> > >
> > > - if (val & GICH_LR_PENDING_BIT) {
> > > - irq->line_level = vgic_get_phys_line_level(irq);
> > > - resample = !irq->line_level;
> > > - } else if (vgic_irq_needs_resampling(irq) &&
> > > - !(irq->active || irq->pending_latch)) {
> > > - resample = true;
> > > + if (unlikely(vgic_irq_needs_resampling(irq))) {
> > > + if (!(irq->active || irq->pending_latch))
> > > + resample = true;
> > > + } else {
> > > + if ((val & GICH_LR_PENDING_BIT) ||
> > > + (deactivated && irq->line_level)) {
> > > + irq->line_level = vgic_get_phys_line_level(irq);
> > > + resample = !irq->line_level;
> > > + }
> > > }
> > >
> > > if (resample)
> > > diff --git a/arch/arm64/kvm/vgic/vgic-v3.c b/arch/arm64/kvm/vgic/vgic-v3.c
> > > index 66004f61cd83..74f9aefffd5e 100644
> > > --- a/arch/arm64/kvm/vgic/vgic-v3.c
> > > +++ b/arch/arm64/kvm/vgic/vgic-v3.c
> > > @@ -46,6 +46,7 @@ void vgic_v3_fold_lr_state(struct kvm_vcpu *vcpu)
> > > u32 intid, cpuid;
> > > struct vgic_irq *irq;
> > > bool is_v2_sgi = false;
> > > + bool deactivated;
> > >
> > > cpuid = val & GICH_LR_PHYSID_CPUID;
> > > cpuid >>= GICH_LR_PHYSID_CPUID_SHIFT;
> > > @@ -68,7 +69,8 @@ void vgic_v3_fold_lr_state(struct kvm_vcpu *vcpu)
> > >
> > > raw_spin_lock(&irq->irq_lock);
> > >
> > > - /* Always preserve the active bit */
> > > + /* Always preserve the active bit, note deactivation */
> > > + deactivated = irq->active && !(val & ICH_LR_ACTIVE_BIT);
> > > irq->active = !!(val & ICH_LR_ACTIVE_BIT);
> > >
> > > if (irq->active && is_v2_sgi)
> > > @@ -98,6 +100,12 @@ void vgic_v3_fold_lr_state(struct kvm_vcpu *vcpu)
> > > * device state could have changed or we simply need to
> > > * process the still pending interrupt later.
> > > *
> > > + * We could also have entered the guest with the interrupt
> > > + * active+pending. On the next exit, we need to re-evaluate
> > > + * the pending state, as it could otherwise result in a
> > > + * spurious interrupt by injecting a now potentially stale
> > > + * pending state.
> > > + *
> > > * If this causes us to lower the level, we have to also clear
> > > * the physical active state, since we will otherwise never be
> > > * told when the interrupt becomes asserted again.
> > > @@ -108,12 +116,15 @@ void vgic_v3_fold_lr_state(struct kvm_vcpu *vcpu)
> > > if (vgic_irq_is_mapped_level(irq)) {
> > > bool resample = false;
> > >
> > > - if (val & ICH_LR_PENDING_BIT) {
> > > - irq->line_level = vgic_get_phys_line_level(irq);
> > > - resample = !irq->line_level;
> > > - } else if (vgic_irq_needs_resampling(irq) &&
> > > - !(irq->active || irq->pending_latch)) {
> > > - resample = true;
> > > + if (unlikely(vgic_irq_needs_resampling(irq))) {
> > > + if (!(irq->active || irq->pending_latch))
> > > + resample = true;
> > > + } else {
> > > + if ((val & ICH_LR_PENDING_BIT) ||
> > > + (deactivated && irq->line_level)) {
> > > + irq->line_level = vgic_get_phys_line_level(irq);
> > > + resample = !irq->line_level;
> > > + }
>
> The vGICv3 and vGICv2 implementations look identical here, should we
> have a helper that keeps the code common between the two?
Probably. This code used to be much simpler, but it has grown a bit
unwieldy since I added the M1 support hack. This change doesn't make
look any better so it is probably time for a minor refactor.
I've pushed out an updated patch, but I'll wait a bit more for
additional feedback before posting it again.
>
> Otherwise, the functional change LGTM, so:
>
> Reviewed-by: Oliver Upton <oupton at google.com>
Thanks,
M.
--
Without deviation from the norm, progress is not possible.
More information about the linux-arm-kernel
mailing list