[PATCH v3 02/13] dt-bindings: memory: mediatek: Add mt8195 smi sub common

[Rob Herring]

On Tue, Aug 10, 2021 at 04:08:48PM +0800, Yong Wu wrote:
> Add the binding for smi-sub-common. The SMI block diagram like this:
> 
>         IOMMU
>          |  |
>       smi-common
>   ------------------
>   |      ....      |
>  larb0           larb7   <-max is 8
> 
> The smi-common connects with smi-larb and IOMMU. The maximum larbs number
> that connects with a smi-common is 8. If the engines number is over 8,
> sometimes we use a smi-sub-common which is nearly same with smi-common.
> It supports up to 8 input and 1 output(smi-common has 2 output)
> 
> Something like:
> 
>         IOMMU
>          |  |
>       smi-common
>   ---------------------
>   |      |          ...
> larb0  sub-common   ...   <-max is 8
>       -----------
>        |    |    ...   <-max is 8 too.
>      larb2 larb5
> 
> We don't need extra SW setting for smi-sub-common, only the sub-common has
> special clocks need to enable when the engines access dram.
> 
> If it is sub-common, it should have a "mediatek,smi" phandle to point to
> its smi-common. meanwhile the sub-common only has one gals clock.
> 
> Additionally, add a new property "mediatek,smi_sub_common" for this
> sub-common, this is needed in the IOMMU driver in which we create a device
> link between smi-common and the IOMMU device. If we add the smi-sub-common
> here, the IOMMU driver still need to find the smi-common device. thus,
> add this bool property to indicate if it is sub-common.
> 
> Signed-off-by: Yong Wu <yong.wu at mediatek.com>
> ---
> change note:
> a. change mediatek, smi type from phandle-array to phandle from Rob.
> b. Add a new bool property (mediatek,smi_sub_common) to indicate this is
>    smi-sub-common. the reason is as above.
> ---
>  .../mediatek,smi-common.yaml                  | 30 +++++++++++++++++++
>  1 file changed, 30 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> index 602592b6c3f5..26bb9903864b 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> @@ -38,6 +38,7 @@ properties:
>            - mediatek,mt8192-smi-common
>            - mediatek,mt8195-smi-common-vdo
>            - mediatek,mt8195-smi-common-vpp
> +          - mediatek,mt8195-smi-sub-common
>  
>        - description: for mt7623
>          items:
> @@ -67,6 +68,14 @@ properties:
>      minItems: 2
>      maxItems: 4
>  
> +  mediatek,smi:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: a phandle to the smi-common node above. Only for sub-common.
> +
> +  mediatek,smi_sub_common:

s/_/-/

> +    type: boolean
> +    description: Indicate if this is smi-sub-common.
> +
>  required:
>    - compatible
>    - reg
> @@ -93,6 +102,27 @@ allOf:
>              - const: smi
>              - const: async
>  
> +  - if:  # only for sub common
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - mediatek,mt8195-smi-sub-common
> +    then:
> +      required:
> +        - mediatek,smi
> +        - mediatek,smi_sub_common
> +      properties:
> +        clock:
> +          items:
> +            minItems: 3
> +            maxItems: 3
> +        clock-names:
> +          items:
> +            - const: apb
> +            - const: smi
> +            - const: gals0

If not allowed for other compatibles, you need:

else:
  properties:
    mediatek,sni: false
    mediatek,smi_sub_common: false


> +
>    - if:  # for gen2 HW that have gals
>        properties:
>          compatible:
> -- 
> 2.18.0
> 
>