[PATCH 0/4] mmc: pwrseq: sd8787: add support for selectable

[Claudiu.Beznea at microchip.com]

On 13.08.2021 23:23, Rob Herring wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On Fri, Aug 06, 2021 at 02:29:57PM +0300, Claudiu Beznea wrote:
>> Hi,
>>
>> This series adds support for selecting the delay b/w reset and power
>> lines on pwrseq-sd8787. With this the driver could also be used by
>> other devices (e.g. WILC1000/WILC3000 which needs a delay of 5ms). Along
>> with this added the DT bindings for WILC3000 device present on
>> SAMA5D27 WLSOM1 board.
> 
> A 300ms delay doesn't work?

It should work as the datasheet specifies a minimum of 5ms is necessary.

> Is powering on the device so timing
> critical?
> 
> Add a new compatible for your device and imply the timing from that.
> That way we're not extending the binding a property at a time in a
> poorly designed way for each new timing quirk.

OK, will do it in v2.

Thank you for your review,
Claudiu Beznea

> 
> Rob
>