[PATCH v2 0/7] ARM: dts: at91: add Exegin Q5xR5 and CalAmp LMU5000

[Claudiu Beznea]

Hi,

This series adds support for Exegin Q5xR5 and CalAmp LMU5000 boards
which were maintained up to this moment, separatelly, in OpenWrt tree.
With these patches the support for these boards will be included in
upstream kernel and there will be no need to forward port the proper
patches in OpenWrt every time the OpenWrt kernel version is changed.

Thank you,
Claudiu Beznea

Changes in v2:
- swapped commit message and diff b/w patches
  "dt-bindings: ARM: at91: document exegin q5xr5 board" and
  "dt-bindings: ARM: at91: document CalAmp LMU5000 board"
- re-ordered patches to accommodate the above swapping
- collected tags

Adam Porter (1):
  ARM: dts: at91: add CalAmp LMU5000 board

Claudiu Beznea (5):
  ARM: dts: at91: at91sam9260: add pinctrl label
  dt-bindings: add vendor prefix for calamp
  dt-bindings: ARM: at91: document CalAmp LMU5000 board
  dt-bindings: add vendor prefix for exegin
  dt-bindings: ARM: at91: document exegin q5xr5 board

Owen Kirby (1):
  ARM: dts: at91: add Exegin Q5xR5 board

 .../devicetree/bindings/arm/atmel-at91.yaml   |  12 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |   4 +
 arch/arm/boot/dts/Makefile                    |   2 +
 arch/arm/boot/dts/at91-lmu5000.dts            | 148 +++++++++++++
 arch/arm/boot/dts/at91-q5xr5.dts              | 200 ++++++++++++++++++
 arch/arm/boot/dts/at91sam9260.dtsi            |   2 +-
 6 files changed, 367 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/at91-lmu5000.dts
 create mode 100644 arch/arm/boot/dts/at91-q5xr5.dts

-- 
2.25.1