[PATCH v3 2/2] arm64: zynqmp: Add support for Xilinx Kria SOM board
Rob Herring
robh at kernel.org
Fri Aug 13 13:09:23 PDT 2021
On Fri, Aug 06, 2021 at 12:12:08PM +0200, Michal Simek wrote:
> There are couple of revisions of SOMs (k26) and associated carrier cards
> (kv260).
> SOM itself has two major versions:
> sm-k26 - SOM with EMMC
> smk-k26 - SOM without EMMC used on starter kit with preprogrammed firmware
> in QSPI.
>
> SOMs are describing only devices available on the SOM or connections which
> are described in specification (for example UART, fwuen).
>
> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
> ---
>
> Changes in v3:
> - Fix led node name
> - Fix compatible string for xlnx,zynqmp-sk-kv260-revA/Y/Z
> - Fix headers alignment
> - Move USB3 PHY properties from DWC3 node to USB node - reported by Manish
> Narani
> - Change dtb names generated with dtbo
> - Fix emmc comment style
> -
>
> Changes in v2:
> - Use sugar syntax - reported by Geert
> - Update copyright years
> - Fix SD3.0 comment alignment
> - Remove one newline from Makefile
>
> https://www.xilinx.com/products/som/kria.html
> ---
> .../devicetree/bindings/arm/xilinx.yaml | 31 ++
> arch/arm64/boot/dts/xilinx/Makefile | 13 +
> .../boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts | 335 ++++++++++++++++++
> .../boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts | 318 +++++++++++++++++
> .../boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 289 +++++++++++++++
> .../boot/dts/xilinx/zynqmp-smk-k26-revA.dts | 21 ++
> 6 files changed, 1007 insertions(+)
> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts
> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts
> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml
> index a0b1ae6e3e71..31b86a6363b8 100644
> --- a/Documentation/devicetree/bindings/arm/xilinx.yaml
> +++ b/Documentation/devicetree/bindings/arm/xilinx.yaml
> @@ -116,6 +116,37 @@ properties:
> - const: xlnx,zynqmp-zcu111
> - const: xlnx,zynqmp
>
> + - description: Xilinx Kria SOMs
> + items:
> + - const: xlnx,zynqmp-sm-k26-rev1
> + - const: xlnx,zynqmp-sm-k26-revB
> + - const: xlnx,zynqmp-sm-k26-revA
> + - const: xlnx,zynqmp-sm-k26
How is having all 4 strings useful? Seems like it should be only 1 of
the rev's at a time.
> + - const: xlnx,zynqmp
> +
> + - description: Xilinx Kria SOMs (starter)
> + items:
> + - const: xlnx,zynqmp-smk-k26-rev1
> + - const: xlnx,zynqmp-smk-k26-revB
> + - const: xlnx,zynqmp-smk-k26-revA
> + - const: xlnx,zynqmp-smk-k26
> + - const: xlnx,zynqmp
> +
> + - description: Xilinx Kria Carrier Cards (revA/Y/Z)
> + items:
> + - const: xlnx,zynqmp-sk-kv260-revA
> + - const: xlnx,zynqmp-sk-kv260-revY
> + - const: xlnx,zynqmp-sk-kv260-revZ
> + - const: xlnx,zynqmp-sk-k260
> + - const: xlnx,zynqmp
> +
> + - description: Xilinx Kria Carrier Cards (rev1/B)
> + items:
> + - const: xlnx,zynqmp-sk-kv260-rev1
> + - const: xlnx,zynqmp-sk-kv260-revB
> + - const: xlnx,zynqmp-sk-k260
> + - const: xlnx,zynqmp
> +
> additionalProperties: true
>
> ...
> diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile
> index 083ed52337fd..4e159540d031 100644
> --- a/arch/arm64/boot/dts/xilinx/Makefile
> +++ b/arch/arm64/boot/dts/xilinx/Makefile
> @@ -17,3 +17,16 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revA.dtb
> dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revC.dtb
> dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu106-revA.dtb
> dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu111-revA.dtb
> +
> +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA.dtb
> +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA.dtb
> +
> +sm-k26-revA-sck-kv-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo
> +sm-k26-revA-sck-kv-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo
> +smk-k26-revA-sm-k26-revA-sck-kv-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo
> +smk-k26-revA-sm-k26-revA-sck-kv-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo
> +
> +dtb-$(CONFIG_ARCH_ZYNQMP) += sm-k26-revA-sck-kv-g-revA.dtb
> +dtb-$(CONFIG_ARCH_ZYNQMP) += sm-k26-revA-sck-kv-g-revB.dtb
> +dtb-$(CONFIG_ARCH_ZYNQMP) += smk-k26-revA-sm-k26-revA-sck-kv-g-revA.dtb
> +dtb-$(CONFIG_ARCH_ZYNQMP) += smk-k26-revA-sm-k26-revA-sck-kv-g-revB.dtb
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts
> new file mode 100644
> index 000000000000..22602d8c33f8
> --- /dev/null
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts
> @@ -0,0 +1,335 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * dts file for KV260 revA Carrier Card
> + *
> + * (C) Copyright 2020 - 2021, Xilinx, Inc.
> + *
> + * SD level shifter:
> + * "A" – A01 board un-modified (NXP)
> + * "Y" – A01 board modified with legacy interposer (Nexperia)
> + * "Z" – A01 board modified with Diode interposer
> + *
> + * Michal Simek <michal.simek at xilinx.com>
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/net/ti-dp83867.h>
> +#include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
> +
> +/dts-v1/;
> +/plugin/;
> +
> +&{/} {
> + compatible = "xlnx,zynqmp-sk-kv260-revA",
> + "xlnx,zynqmp-sk-kv260-revY",
> + "xlnx,zynqmp-sk-kv260-revZ",
> + "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp";
> +};
> +
> +&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default", "gpio";
> + pinctrl-0 = <&pinctrl_i2c1_default>;
> + pinctrl-1 = <&pinctrl_i2c1_gpio>;
> + scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
> + sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
> +
> + u14: ina260 at 40 { /* u14 */
> + compatible = "ti,ina260";
> + #io-channel-cells = <1>;
> + label = "ina260-u14";
> + reg = <0x40>;
> + };
> + /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
> +};
> +
> +&amba {
> + ina260-u14 {
> + compatible = "iio-hwmon";
> + io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
> + };
> +
> + si5332_0: si5332_0 { /* u17 */
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <125000000>;
> + };
> +
> + si5332_1: si5332_1 { /* u17 */
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <25000000>;
> + };
> +
> + si5332_2: si5332_2 { /* u17 */
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <48000000>;
> + };
> +
> + si5332_3: si5332_3 { /* u17 */
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <24000000>;
> + };
> +
> + si5332_4: si5332_4 { /* u17 */
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <26000000>;
> + };
> +
> + si5332_5: si5332_5 { /* u17 */
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <27000000>;
> + };
> +};
> +
> +/* DP/USB 3.0 and SATA */
> +&psgtr {
> + status = "okay";
> + /* pcie, usb3, sata */
> + clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>;
> + clock-names = "ref0", "ref1", "ref2";
> +};
> +
> +&sata {
> + status = "okay";
> + /* SATA OOB timing settings */
> + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
> + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
> + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
> + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
> + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
> + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
> + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
> + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
> + phy-names = "sata-phy";
> + phys = <&psgtr 3 PHY_TYPE_SATA 1 2>;
> +};
> +
> +&zynqmp_dpsub {
> + status = "disabled";
> + phy-names = "dp-phy0", "dp-phy1";
> + phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>;
> +};
> +
> +&zynqmp_dpdma {
> + status = "okay";
> +};
> +
> +&usb0 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usb0_default>;
> + phy-names = "usb3-phy";
> + phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
> + usbhub: usb5744 { /* u43 */
> + compatible = "microchip,usb5744";
> + reset-gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
> + };
> +};
> +
> +&dwc3_0 {
> + status = "okay";
> + dr_mode = "host";
> + snps,usb3_lpm_capable;
> + maximum-speed = "super-speed";
> +};
> +
> +&sdhci1 { /* on CC with tuned parameters */
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sdhci1_default>;
> + /*
> + * SD 3.0 requires level shifter and this property
> + * should be removed if the board has level shifter and
> + * need to work in UHS mode
> + */
> + no-1-8-v;
> + disable-wp;
> + xlnx,mio-bank = <1>;
> +};
> +
> +&gem3 { /* required by spec */
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gem3_default>;
> + phy-handle = <&phy0>;
> + phy-mode = "rgmii-id";
> +
> + mdio: mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
> + reset-delay-us = <2>;
> +
> + phy0: ethernet-phy at 1 {
> + #phy-cells = <1>;
> + reg = <1>;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
> + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
> + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> + ti,dp83867-rxctrl-strap-quirk;
> + };
> + };
> +};
> +
> +&pinctrl0 { /* required by spec */
> + status = "okay";
> +
> + pinctrl_uart1_default: uart1-default {
> + conf {
> + groups = "uart1_9_grp";
> + slew-rate = <SLEW_RATE_SLOW>;
> + power-source = <IO_STANDARD_LVCMOS18>;
> + drive-strength = <12>;
> + };
> +
> + conf-rx {
> + pins = "MIO37";
> + bias-high-impedance;
> + };
> +
> + conf-tx {
> + pins = "MIO36";
> + bias-disable;
> + };
> +
> + mux {
> + groups = "uart1_9_grp";
> + function = "uart1";
> + };
> + };
> +
> + pinctrl_i2c1_default: i2c1-default {
> + conf {
> + groups = "i2c1_6_grp";
> + bias-pull-up;
> + slew-rate = <SLEW_RATE_SLOW>;
> + power-source = <IO_STANDARD_LVCMOS18>;
> + };
> +
> + mux {
> + groups = "i2c1_6_grp";
> + function = "i2c1";
> + };
> + };
> +
> + pinctrl_i2c1_gpio: i2c1-gpio {
> + conf {
> + groups = "gpio0_24_grp", "gpio0_25_grp";
> + slew-rate = <SLEW_RATE_SLOW>;
> + power-source = <IO_STANDARD_LVCMOS18>;
> + };
> +
> + mux {
> + groups = "gpio0_24_grp", "gpio0_25_grp";
> + function = "gpio0";
> + };
> + };
> +
> + pinctrl_gem3_default: gem3-default {
> + conf {
> + groups = "ethernet3_0_grp";
> + slew-rate = <SLEW_RATE_SLOW>;
> + power-source = <IO_STANDARD_LVCMOS18>;
> + };
> +
> + conf-rx {
> + pins = "MIO70", "MIO72", "MIO74";
> + bias-high-impedance;
> + low-power-disable;
> + };
> +
> + conf-bootstrap {
> + pins = "MIO71", "MIO73", "MIO75";
> + bias-disable;
> + low-power-disable;
> + };
> +
> + conf-tx {
> + pins = "MIO64", "MIO65", "MIO66",
> + "MIO67", "MIO68", "MIO69";
> + bias-disable;
> + low-power-enable;
> + };
> +
> + conf-mdio {
> + groups = "mdio3_0_grp";
> + slew-rate = <SLEW_RATE_SLOW>;
> + power-source = <IO_STANDARD_LVCMOS18>;
> + bias-disable;
> + };
> +
> + mux-mdio {
> + function = "mdio3";
> + groups = "mdio3_0_grp";
> + };
> +
> + mux {
> + function = "ethernet3";
> + groups = "ethernet3_0_grp";
> + };
> + };
> +
> + pinctrl_usb0_default: usb0-default {
> + conf {
> + groups = "usb0_0_grp";
> + slew-rate = <SLEW_RATE_SLOW>;
> + power-source = <IO_STANDARD_LVCMOS18>;
> + };
> +
> + conf-rx {
> + pins = "MIO52", "MIO53", "MIO55";
> + bias-high-impedance;
> + };
> +
> + conf-tx {
> + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
> + "MIO60", "MIO61", "MIO62", "MIO63";
> + bias-disable;
> + };
> +
> + mux {
> + groups = "usb0_0_grp";
> + function = "usb0";
> + };
> + };
> +
> + pinctrl_sdhci1_default: sdhci1-default {
> + conf {
> + groups = "sdio1_0_grp";
> + slew-rate = <SLEW_RATE_SLOW>;
> + power-source = <IO_STANDARD_LVCMOS18>;
> + bias-disable;
> + };
> +
> + conf-cd {
> + groups = "sdio1_cd_0_grp";
> + bias-high-impedance;
> + bias-pull-up;
> + slew-rate = <SLEW_RATE_SLOW>;
> + power-source = <IO_STANDARD_LVCMOS18>;
> + };
> +
> + mux-cd {
> + groups = "sdio1_cd_0_grp";
> + function = "sdio1_cd";
> + };
> +
> + mux {
> + groups = "sdio1_0_grp";
> + function = "sdio1";
> + };
> + };
> +};
> +
> +&uart1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1_default>;
> +};
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts
> new file mode 100644
> index 000000000000..df054e152a77
> --- /dev/null
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts
> @@ -0,0 +1,318 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * dts file for KV260 revA Carrier Card
> + *
> + * (C) Copyright 2020 - 2021, Xilinx, Inc.
> + *
> + * Michal Simek <michal.simek at xilinx.com>
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/net/ti-dp83867.h>
> +#include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
> +
> +/dts-v1/;
> +/plugin/;
> +
> +&{/} {
> + compatible = "xlnx,zynqmp-sk-kv260-rev1",
> + "xlnx,zynqmp-sk-kv260-revB",
> + "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp";
I don't think changing the root compatible in an overlay is a good
policy. Do you need this all to be overlays?
> +};
> +
> +&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default", "gpio";
> + pinctrl-0 = <&pinctrl_i2c1_default>;
> + pinctrl-1 = <&pinctrl_i2c1_gpio>;
> + scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
> + sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
> +
> + u14: ina260 at 40 { /* u14 */
> + compatible = "ti,ina260";
Not documented. Please run 'make dtbs_check' and don't add new warnings.
> + #io-channel-cells = <1>;
> + label = "ina260-u14";
> + reg = <0x40>;
> + };
> + usbhub: usb5744 at 2d { /* u43 */
> + compatible = "microchip,usb5744";
Not documented.
> + reg = <0x2d>;
> + reset-gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
> + };
> + /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
> +};
> +
> +&amba {
> + ina260-u14 {
> + compatible = "iio-hwmon";
> + io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
> + };
> +
> + si5332_0: si5332_0 { /* u17 */
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <125000000>;
> + };
> +
> + si5332_1: si5332_1 { /* u17 */
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <25000000>;
> + };
> +
> + si5332_2: si5332_2 { /* u17 */
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <48000000>;
> + };
> +
> + si5332_3: si5332_3 { /* u17 */
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <24000000>;
> + };
> +
> + si5332_4: si5332_4 { /* u17 */
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <26000000>;
> + };
> +
> + si5332_5: si5332_5 { /* u17 */
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <27000000>;
> + };
> +};
> +
> +/* DP/USB 3.0 */
> +&psgtr {
> + status = "okay";
> + /* pcie, usb3, sata */
> + clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>;
> + clock-names = "ref0", "ref1", "ref2";
> +};
> +
> +&zynqmp_dpsub {
> + status = "disabled";
> + phy-names = "dp-phy0", "dp-phy1";
> + phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>;
> +};
> +
> +&zynqmp_dpdma {
> + status = "okay";
> +};
> +
> +&usb0 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usb0_default>;
> + phy-names = "usb3-phy";
> + phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
> +};
> +
> +&dwc3_0 {
> + status = "okay";
> + dr_mode = "host";
> + snps,usb3_lpm_capable;
> + maximum-speed = "super-speed";
> +};
> +
> +&sdhci1 { /* on CC with tuned parameters */
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sdhci1_default>;
> + /*
> + * SD 3.0 requires level shifter and this property
> + * should be removed if the board has level shifter and
> + * need to work in UHS mode
> + */
> + no-1-8-v;
> + disable-wp;
> + xlnx,mio-bank = <1>;
> + clk-phase-sd-hs = <126>, <60>;
> + clk-phase-uhs-sdr25 = <120>, <60>;
> + clk-phase-uhs-ddr50 = <126>, <48>;
> +};
> +
> +&gem3 { /* required by spec */
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gem3_default>;
> + phy-handle = <&phy0>;
> + phy-mode = "rgmii-id";
> +
> + mdio: mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
> + reset-delay-us = <2>;
> +
> + phy0: ethernet-phy at 1 {
> + #phy-cells = <1>;
> + reg = <1>;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
> + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
> + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> + ti,dp83867-rxctrl-strap-quirk;
> + };
> + };
> +};
> +
> +&pinctrl0 { /* required by spec */
> + status = "okay";
> +
> + pinctrl_uart1_default: uart1-default {
> + conf {
> + groups = "uart1_9_grp";
> + slew-rate = <SLEW_RATE_SLOW>;
> + power-source = <IO_STANDARD_LVCMOS18>;
> + drive-strength = <12>;
> + };
> +
> + conf-rx {
> + pins = "MIO37";
> + bias-high-impedance;
> + };
> +
> + conf-tx {
> + pins = "MIO36";
> + bias-disable;
> + };
> +
> + mux {
> + groups = "uart1_9_grp";
> + function = "uart1";
> + };
> + };
> +
> + pinctrl_i2c1_default: i2c1-default {
> + conf {
> + groups = "i2c1_6_grp";
> + bias-pull-up;
> + slew-rate = <SLEW_RATE_SLOW>;
> + power-source = <IO_STANDARD_LVCMOS18>;
> + };
> +
> + mux {
> + groups = "i2c1_6_grp";
> + function = "i2c1";
> + };
> + };
> +
> + pinctrl_i2c1_gpio: i2c1-gpio {
> + conf {
> + groups = "gpio0_24_grp", "gpio0_25_grp";
> + slew-rate = <SLEW_RATE_SLOW>;
> + power-source = <IO_STANDARD_LVCMOS18>;
> + };
> +
> + mux {
> + groups = "gpio0_24_grp", "gpio0_25_grp";
> + function = "gpio0";
> + };
> + };
> +
> + pinctrl_gem3_default: gem3-default {
> + conf {
> + groups = "ethernet3_0_grp";
> + slew-rate = <SLEW_RATE_SLOW>;
> + power-source = <IO_STANDARD_LVCMOS18>;
> + };
> +
> + conf-rx {
> + pins = "MIO70", "MIO72", "MIO74";
> + bias-high-impedance;
> + low-power-disable;
> + };
> +
> + conf-bootstrap {
> + pins = "MIO71", "MIO73", "MIO75";
> + bias-disable;
> + low-power-disable;
> + };
> +
> + conf-tx {
> + pins = "MIO64", "MIO65", "MIO66",
> + "MIO67", "MIO68", "MIO69";
> + bias-disable;
> + low-power-enable;
> + };
> +
> + conf-mdio {
> + groups = "mdio3_0_grp";
> + slew-rate = <SLEW_RATE_SLOW>;
> + power-source = <IO_STANDARD_LVCMOS18>;
> + bias-disable;
> + };
> +
> + mux-mdio {
> + function = "mdio3";
> + groups = "mdio3_0_grp";
> + };
> +
> + mux {
> + function = "ethernet3";
> + groups = "ethernet3_0_grp";
> + };
> + };
> +
> + pinctrl_usb0_default: usb0-default {
> + conf {
> + groups = "usb0_0_grp";
> + slew-rate = <SLEW_RATE_SLOW>;
> + power-source = <IO_STANDARD_LVCMOS18>;
> + };
> +
> + conf-rx {
> + pins = "MIO52", "MIO53", "MIO55";
> + bias-high-impedance;
> + };
> +
> + conf-tx {
> + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
> + "MIO60", "MIO61", "MIO62", "MIO63";
> + bias-disable;
> + };
> +
> + mux {
> + groups = "usb0_0_grp";
> + function = "usb0";
> + };
> + };
> +
> + pinctrl_sdhci1_default: sdhci1-default {
> + conf {
> + groups = "sdio1_0_grp";
> + slew-rate = <SLEW_RATE_SLOW>;
> + power-source = <IO_STANDARD_LVCMOS18>;
> + bias-disable;
> + };
> +
> + conf-cd {
> + groups = "sdio1_cd_0_grp";
> + bias-high-impedance;
> + bias-pull-up;
> + slew-rate = <SLEW_RATE_SLOW>;
> + power-source = <IO_STANDARD_LVCMOS18>;
> + };
> +
> + mux-cd {
> + groups = "sdio1_cd_0_grp";
> + function = "sdio1_cd";
> + };
> +
> + mux {
> + groups = "sdio1_0_grp";
> + function = "sdio1";
> + };
> + };
> +};
> +
> +&uart1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1_default>;
> +};
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
> new file mode 100644
> index 000000000000..550b389153e6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
> @@ -0,0 +1,289 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * dts file for Xilinx ZynqMP SM-K26 rev1/B/A
> + *
> + * (C) Copyright 2020 - 2021, Xilinx, Inc.
> + *
> + * Michal Simek <michal.simek at xilinx.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "zynqmp.dtsi"
> +#include "zynqmp-clk-ccf.dtsi"
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/phy/phy.h>
> +
> +/ {
> + model = "ZynqMP SM-K26 Rev1/B/A";
> + compatible = "xlnx,zynqmp-sm-k26-rev1", "xlnx,zynqmp-sm-k26-revB",
> + "xlnx,zynqmp-sm-k26-revA", "xlnx,zynqmp-sm-k26",
> + "xlnx,zynqmp";
> +
> + aliases {
> + i2c0 = &i2c0;
> + i2c1 = &i2c1;
> + mmc0 = &sdhci0;
> + mmc1 = &sdhci1;
> + nvmem0 = &eeprom;
> + nvmem1 = &eeprom_cc;
> + rtc0 = &rtc;
> + serial0 = &uart0;
> + serial1 = &uart1;
> + serial2 = &dcc;
> + spi0 = &qspi;
> + spi1 = &spi0;
> + spi2 = &spi1;
> + usb0 = &usb0;
> + usb1 = &usb1;
> + };
> +
> + chosen {
> + bootargs = "earlycon";
> + stdout-path = "serial1:115200n8";
> + };
> +
> + memory at 0 {
> + device_type = "memory"; /* 4GB */
> + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + autorepeat;
> + fwuen {
> + label = "fwuen";
> + gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + ds35-led {
> + label = "heartbeat";
> + gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + };
> +
> + ds36-led {
> + label = "vbus_det";
> + gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
> + default-state = "on";
> + };
> + };
> +};
> +
> +&uart1 { /* MIO36/MIO37 */
> + status = "okay";
> +};
> +
> +&qspi { /* MIO 0-5 - U143 */
> + status = "okay";
> + flash at 0 { /* MT25QU512A */
> + compatible = "mt25qu512a", "jedec,spi-nor"; /* 64MB */
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0>;
> + spi-tx-bus-width = <1>;
> + spi-rx-bus-width = <4>;
> + spi-max-frequency = <40000000>; /* 40MHz */
> + partition at 0 {
> + label = "Image Selector";
> + reg = <0x0 0x80000>; /* 512KB */
> + read-only;
> + lock;
> + };
> + partition at 80000 {
> + label = "Image Selector Golden";
> + reg = <0x80000 0x80000>; /* 512KB */
> + read-only;
> + lock;
> + };
> + partition at 100000 {
> + label = "Persistent Register";
> + reg = <0x100000 0x20000>; /* 128KB */
> + };
> + partition at 120000 {
> + label = "Persistent Register Backup";
> + reg = <0x120000 0x20000>; /* 128KB */
> + };
> + partition at 140000 {
> + label = "Open_1";
> + reg = <0x140000 0xC0000>; /* 768KB */
> + };
> + partition at 200000 {
> + label = "Image A (FSBL, PMU, ATF, U-Boot)";
> + reg = <0x200000 0xD00000>; /* 13MB */
> + };
> + partition at f00000 {
> + label = "ImgSel Image A Catch";
> + reg = <0xF00000 0x80000>; /* 512KB */
> + read-only;
> + lock;
> + };
> + partition at f80000 {
> + label = "Image B (FSBL, PMU, ATF, U-Boot)";
> + reg = <0xF80000 0xD00000>; /* 13MB */
> + };
> + partition at 1c80000 {
> + label = "ImgSel Image B Catch";
> + reg = <0x1C80000 0x80000>; /* 512KB */
> + read-only;
> + lock;
> + };
> + partition at 1d00000 {
> + label = "Open_2";
> + reg = <0x1D00000 0x100000>; /* 1MB */
> + };
> + partition at 1e00000 {
> + label = "Recovery Image";
> + reg = <0x1E00000 0x200000>; /* 2MB */
> + read-only;
> + lock;
> + };
> + partition at 2000000 {
> + label = "Recovery Image Backup";
> + reg = <0x2000000 0x200000>; /* 2MB */
> + read-only;
> + lock;
> + };
> + partition at 2200000 {
> + label = "U-Boot storage variables";
> + reg = <0x2200000 0x20000>; /* 128KB */
> + };
> + partition at 2220000 {
> + label = "U-Boot storage variables backup";
> + reg = <0x2220000 0x20000>; /* 128KB */
> + };
> + partition at 2240000 {
> + label = "SHA256";
> + reg = <0x2240000 0x10000>; /* 256B but 64KB sector */
> + read-only;
> + lock;
> + };
> + partition at 2250000 {
> + label = "User";
> + reg = <0x2250000 0x1db0000>; /* 29.5 MB */
> + };
> + };
> +};
> +
> +&sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A */
> + status = "okay";
> + non-removable;
> + disable-wp;
> + bus-width = <8>;
> + xlnx,mio-bank = <0>;
> +};
> +
> +&spi1 { /* MIO6, 9-11 */
> + status = "okay";
> + label = "TPM";
> + num-cs = <1>;
> + tpm at 0 { /* slm9670 - U144 */
> + compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
> + reg = <0>;
> + spi-max-frequency = <18500000>;
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> + clock-frequency = <400000>;
> + scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
> + sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
> +
> + eeprom: eeprom at 50 { /* u46 - also at address 0x58 */
> + compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
> + reg = <0x50>;
> + /* WP pin EE_WP_EN connected to slg7x644092 at 68 */
> + };
> +
> + eeprom_cc: eeprom at 51 { /* required by spec - also at address 0x59 */
> + compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
> + reg = <0x51>;
> + };
> +
> + /* da9062 at 30 - u170 - also at address 0x31 */
> + /* da9131 at 33 - u167 */
> + da9131: pmic at 33 {
> + compatible = "dlg,da9131";
> + reg = <0x33>;
> + regulators {
> + da9131_buck1: buck1 {
> + regulator-name = "da9131_buck1";
> + regulator-boot-on;
> + regulator-always-on;
> + };
> + da9131_buck2: buck2 {
> + regulator-name = "da9131_buck2";
> + regulator-boot-on;
> + regulator-always-on;
> + };
> + };
> + };
> +
> + /* da9130 at 32 - u166 */
> + da9130: pmic at 32 {
> + compatible = "dlg,da9130";
> + reg = <0x32>;
> + regulators {
> + da9130_buck1: buck1 {
> + regulator-name = "da9130_buck1";
> + regulator-boot-on;
> + regulator-always-on;
> + };
> + };
> + };
> +
> + /* slg7x644091 at 70 - u168 NOT accessible due to address conflict with stdp4320 */
> + /*
> + * stdp4320 - u27 FW has below two issues to be fixed in next board revision.
> + * Device acknowledging to addresses 0x5C, 0x5D, 0x70, 0x72, 0x76.
> + * Address conflict with slg7x644091 at 70 making both the devices NOT accessible.
> + * With the FW fix, stdp4320 should respond to address 0x73 only.
> + */
> + /* slg7x644092 at 68 - u169 */
> + /* Also connected via JA1C as C23/C24 */
> +};
> +
> +&gpio {
> + status = "okay";
> + gpio-line-names = "QSPI_CLK", "QSPI_DQ1", "QSPI_DQ2", "QSPI_DQ3", "QSPI_DQ0", /* 0 - 4 */
> + "QSPI_CS_B", "SPI_CLK", "LED1", "LED2", "SPI_CS_B", /* 5 - 9 */
> + "SPI_MISO", "SPI_MOSI", "FWUEN", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */
> + "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */
> + "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST", "I2C1_SCL", /* 20 - 24 */
> + "I2C1_SDA", "", "", "", "", /* 25 - 29 */
> + "", "", "", "", "", /* 30 - 34 */
> + "", "", "", "", "", /* 35 - 39 */
> + "", "", "", "", "", /* 40 - 44 */
> + "", "", "", "", "", /* 45 - 49 */
> + "", "", "", "", "", /* 50 - 54 */
> + "", "", "", "", "", /* 55 - 59 */
> + "", "", "", "", "", /* 60 - 64 */
> + "", "", "", "", "", /* 65 - 69 */
> + "", "", "", "", "", /* 70 - 74 */
> + "", "", "", /* 75 - 77, MIO end and EMIO start */
> + "", "", /* 78 - 79 */
> + "", "", "", "", "", /* 80 - 84 */
> + "", "", "", "", "", /* 85 - 89 */
> + "", "", "", "", "", /* 90 - 94 */
> + "", "", "", "", "", /* 95 - 99 */
> + "", "", "", "", "", /* 100 - 104 */
> + "", "", "", "", "", /* 105 - 109 */
> + "", "", "", "", "", /* 110 - 114 */
> + "", "", "", "", "", /* 115 - 119 */
> + "", "", "", "", "", /* 120 - 124 */
> + "", "", "", "", "", /* 125 - 129 */
> + "", "", "", "", "", /* 130 - 134 */
> + "", "", "", "", "", /* 135 - 139 */
> + "", "", "", "", "", /* 140 - 144 */
> + "", "", "", "", "", /* 145 - 149 */
> + "", "", "", "", "", /* 150 - 154 */
> + "", "", "", "", "", /* 155 - 159 */
> + "", "", "", "", "", /* 160 - 164 */
> + "", "", "", "", "", /* 165 - 169 */
> + "", "", "", ""; /* 170 - 174 */
> +};
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts
> new file mode 100644
> index 000000000000..c70966c1f344
> --- /dev/null
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts
> @@ -0,0 +1,21 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * dts file for Xilinx ZynqMP SMK-K26 rev1/B/A
> + *
> + * (C) Copyright 2020 - 2021, Xilinx, Inc.
> + *
> + * Michal Simek <michal.simek at xilinx.com>
> + */
> +
> +#include "zynqmp-sm-k26-revA.dts"
> +
> +/ {
> + model = "ZynqMP SMK-K26 Rev1/B/A";
> + compatible = "xlnx,zynqmp-smk-k26-rev1", "xlnx,zynqmp-smk-k26-revB",
> + "xlnx,zynqmp-smk-k26-revA", "xlnx,zynqmp-smk-k26",
> + "xlnx,zynqmp";
> +};
> +
> +&sdhci0 {
> + status = "disabled";
> +};
> --
> 2.32.0
>
>
More information about the linux-arm-kernel
mailing list