[PATCH v2 12/29] iommu/mediatek: Always enable output PA over 32bits in isr

[Yong Wu]

Currently the output PA[32:33] is contained by the flag IOVA_34.
This is not right. the iova_34 has no relation with pa[32:33], the 32bits
iova still could map to pa[32:33]. Move it out from the flag.

No need fix tag since currently only mt8192 use the calulation and it
always has this IOVA_34 flag.

Prepare for the IOMMU that still use IOVA 32bits but its dram size may be
over 4GB.

Signed-off-by: Yong Wu <yong.wu at mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index abc721a1da21..a831e56a90eb 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -297,11 +297,11 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
 	write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT;
 	if (MTK_IOMMU_HAS_FLAG(data->plat_data, IOVA_34_EN)) {
 		va34_32 = FIELD_GET(F_MMU_INVAL_VA_34_32_MASK, fault_iova);
-		pa34_32 = FIELD_GET(F_MMU_INVAL_PA_34_32_MASK, fault_iova);
 		fault_iova = fault_iova & F_MMU_INVAL_VA_31_12_MASK;
 		fault_iova |= (u64)va34_32 << 32;
-		fault_pa |= (u64)pa34_32 << 32;
 	}
+	pa34_32 = FIELD_GET(F_MMU_INVAL_PA_34_32_MASK, fault_iova);
+	fault_pa |= (u64)pa34_32 << 32;
 
 	fault_port = F_MMU_INT_ID_PORT_ID(regval);
 	if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_SUB_COMM)) {
-- 
2.18.0