[PATCH v2 05/29] iommu/mediatek: Add 12G~16G support for multi domains

[Yong Wu]

In mt8192, we preassign 0-4G; 4G-8G; 8G-12G for different multimedia
engines. This depends on the "dma-ranges=" in the iommu consumer's dtsi
node.

Adds 12G-16G region here. and reword the previous comment. we don't limit
which master locate in which region.

CCU still is 8G-12G. Don't change it here.

Signed-off-by: Yong Wu <yong.wu at mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 287dfc0fc6f8..259ff7b90ff3 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -179,10 +179,12 @@ static const struct mtk_iommu_iova_region single_domain[] = {
 };
 
 static const struct mtk_iommu_iova_region mt8192_multi_dom[] = {
-	{ .iova_base = 0x0,		.size = SZ_4G},		/* disp: 0 ~ 4G */
+	{ .iova_base = 0x0,		.size = SZ_4G},		/* 0 ~ 4G */
 	#if IS_ENABLED(CONFIG_ARCH_DMA_ADDR_T_64BIT)
-	{ .iova_base = SZ_4G,		.size = SZ_4G},		/* vdec: 4G ~ 8G */
-	{ .iova_base = SZ_4G * 2,	.size = SZ_4G},		/* CAM/MDP: 8G ~ 12G */
+	{ .iova_base = SZ_4G,		.size = SZ_4G},		/* 4G ~ 8G */
+	{ .iova_base = SZ_4G * 2,	.size = SZ_4G},		/* 8G ~ 12G */
+	{ .iova_base = SZ_4G * 3,	.size = SZ_4G},		/* 12G ~ 16G */
+
 	{ .iova_base = 0x240000000ULL,	.size = 0x4000000},	/* CCU0 */
 	{ .iova_base = 0x244000000ULL,	.size = 0x4000000},	/* CCU1 */
 	#endif
-- 
2.18.0