[PATCH] arm64: dts: imx8mq-reform2: add sound support

[Fabio Estevam]

Hi Lucas,

On Thu, Aug 12, 2021 at 4:47 PM Lucas Stach <dev at lynxeye.de> wrote:
>
> This adds sound support to the Reform2.
>
> It differs from the downstream implementation in that the codec
> is used as the BCLK and FSYNC master and the i.MX8MQ only supplies
> a fixed 25MHz MCLK from the oscillator. This allows to support
> a wider range of audio rates by using the codec PLL and to shut
> down the audio PLLs on the i.MX8MQ SoC side.
>
> Signed-off-by: Lucas Stach <dev at lynxeye.de>

Reviewed-by: Fabio Estevam <festevam at gmail.com>