[PATCH v1] ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz

[Oleksij Rempel]

By default ENET_REF is configured to 50MHz, which is usable for the RMII
link. In case RGMII is used, we need 125MHz clock.

Signed-off-by: Oleksij Rempel <o.rempel at pengutronix.de>
---
 arch/arm/boot/dts/imx6qp-prtwd3.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qp-prtwd3.dts b/arch/arm/boot/dts/imx6qp-prtwd3.dts
index 9cbe3386c51a..effe032273f7 100644
--- a/arch/arm/boot/dts/imx6qp-prtwd3.dts
+++ b/arch/arm/boot/dts/imx6qp-prtwd3.dts
@@ -256,6 +256,8 @@ can at 0 {
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF>;
+	assigned-clock-rates = <125000000>;
 	status = "okay";
 
 	phy-mode = "rgmii";
-- 
2.30.2