[PATCH v3 5/5] arm64: dts: add device tree for Traverse Ten64 (LS1088A)
Mathew McBride
matt at traverse.com.au
Mon Aug 9 22:38:28 PDT 2021
The Traverse Technologies Ten64 is a Mini-ITX form factor
networking board using the NXP LS1088A SoC.
This device tree only describes features which the mainline
kernel currently has support for, such as some I2C-connected
devices that are not described at present.
System documentation may be found at ten64doc.traverse.com.au
Signed-off-by: Mathew McBride <matt at traverse.com.au>
Reviewed-by: Ioana Ciornei <ioana.ciornei at nxp.com> # for the MAC/PHY
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../boot/dts/freescale/fsl-ls1088a-ten64.dts | 389 ++++++++++++++++++
2 files changed, 390 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 25806c4924cb..2b3ee42e4a2a 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
new file mode 100644
index 000000000000..3063851c2fb9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Travese Ten64 (LS1088) board
+ * Based on fsl-ls1088a-rdb.dts
+ * Copyright 2017-2020 NXP
+ * Copyright 2019-2021 Traverse Technologies
+ *
+ * Author: Mathew McBride <matt at traverse.com.au>
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1088a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Traverse Ten64";
+ compatible = "traverse,ten64", "fsl,ls1088a";
+
+ aliases {
+ serial0 = &duart0;
+ serial1 = &duart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ buttons {
+ compatible = "gpio-keys";
+
+ /* Fired by system controller when
+ * external power off (e.g ATX Power Button)
+ * asserted
+ */
+ powerdn {
+ label = "External Power Down";
+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+ interrupts = <&gpio1 17 IRQ_TYPE_EDGE_FALLING>;
+ linux,code = <KEY_POWER>;
+ };
+
+ /* Rear Panel 'ADMIN' button (GPIO_H) */
+ admin {
+ label = "ADMIN button";
+ gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+ interrupts = <&gpio3 8 IRQ_TYPE_EDGE_RISING>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ sfp1down {
+ label = "ten64:green:sfp1:down";
+ gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp2up {
+ label = "ten64:green:sfp2:up";
+ gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ admin {
+ label = "ten64:admin";
+ gpios = <&sfpgpio 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sfp_xg0: dpmac2-sfp {
+ compatible = "sff,sfp";
+ i2c-bus = <&sfplower_i2c>;
+ tx-fault-gpios = <&sfpgpio 0 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&sfpgpio 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sfpgpio 2 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sfpgpio 3 GPIO_ACTIVE_HIGH>;
+ maximum-power-milliwatt = <2000>;
+ };
+
+ sfp_xg1: dpmac1-sfp {
+ compatible = "sff,sfp";
+ i2c-bus = <&sfpupper_i2c>;
+ tx-fault-gpios = <&sfpgpio 4 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&sfpgpio 5 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sfpgpio 6 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sfpgpio 7 GPIO_ACTIVE_HIGH>;
+ maximum-power-milliwatt = <2000>;
+ };
+};
+
+/* XG1 - Upper SFP */
+&dpmac1 {
+ sfp = <&sfp_xg1>;
+ pcs-handle = <&pcs1>;
+ phy-connection-type = "10gbase-r";
+ managed = "in-band-status";
+};
+
+/* XG0 - Lower SFP */
+&dpmac2 {
+ sfp = <&sfp_xg0>;
+ pcs-handle = <&pcs2>;
+ phy-connection-type = "10gbase-r";
+ managed = "in-band-status";
+};
+
+/* DPMAC3..6 is GE4 to GE8 */
+&dpmac3 {
+ phy-handle = <&mdio1_phy5>;
+ phy-connection-type = "qsgmii";
+ managed = "in-band-status";
+ pcs-handle = <&pcs3_0>;
+};
+
+&dpmac4 {
+ phy-handle = <&mdio1_phy6>;
+ phy-connection-type = "qsgmii";
+ managed = "in-band-status";
+ pcs-handle = <&pcs3_1>;
+};
+
+&dpmac5 {
+ phy-handle = <&mdio1_phy7>;
+ phy-connection-type = "qsgmii";
+ managed = "in-band-status";
+ pcs-handle = <&pcs3_2>;
+};
+
+&dpmac6 {
+ phy-handle = <&mdio1_phy8>;
+ phy-connection-type = "qsgmii";
+ managed = "in-band-status";
+ pcs-handle = <&pcs3_3>;
+};
+
+/* DPMAC7..10 is GE0 to GE3 */
+&dpmac7 {
+ phy-handle = <&mdio1_phy1>;
+ phy-connection-type = "qsgmii";
+ managed = "in-band-status";
+ pcs-handle = <&pcs7_0>;
+};
+
+&dpmac8 {
+ phy-handle = <&mdio1_phy2>;
+ phy-connection-type = "qsgmii";
+ managed = "in-band-status";
+ pcs-handle = <&pcs7_1>;
+};
+
+&dpmac9 {
+ phy-handle = <&mdio1_phy3>;
+ phy-connection-type = "qsgmii";
+ managed = "in-band-status";
+ pcs-handle = <&pcs7_2>;
+};
+
+&dpmac10 {
+ phy-handle = <&mdio1_phy4>;
+ phy-connection-type = "qsgmii";
+ managed = "in-band-status";
+ pcs-handle = <&pcs7_3>;
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&duart1 {
+ status = "okay";
+};
+
+&emdio1 {
+ status = "okay";
+
+ mdio1_phy5: ethernet-phy at c {
+ reg = <0xc>;
+ };
+
+ mdio1_phy6: ethernet-phy at d {
+ reg = <0xd>;
+ };
+
+ mdio1_phy7: ethernet-phy at e {
+ reg = <0xe>;
+ };
+
+ mdio1_phy8: ethernet-phy at f {
+ reg = <0xf>;
+ };
+
+ mdio1_phy1: ethernet-phy at 1c {
+ reg = <0x1c>;
+ };
+
+ mdio1_phy2: ethernet-phy at 1d {
+ reg = <0x1d>;
+ };
+
+ mdio1_phy3: ethernet-phy at 1e {
+ reg = <0x1e>;
+ };
+
+ mdio1_phy4: ethernet-phy at 1f {
+ reg = <0x1f>;
+ };
+};
+
+&esdhc {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ sfpgpio: gpio at 76 {
+ compatible = "ti,tca9539";
+ reg = <0x76>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ admin_led_lower {
+ gpio-hog;
+ gpios = <13 GPIO_ACTIVE_HIGH>;
+ output-low;
+ };
+ };
+
+ at97sc: tpm at 29 {
+ compatible = "atmel,at97sc3204t";
+ reg = <0x29>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ rx8035: rtc at 32 {
+ compatible = "epson,rx8035";
+ reg = <0x32>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ i2c-switch at 70 {
+ compatible = "nxp,pca9540";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ sfpupper_i2c: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ sfplower_i2c: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+};
+
+&pcs_mdio1 {
+ status = "okay";
+};
+
+&pcs_mdio2 {
+ status = "okay";
+};
+
+&pcs_mdio3 {
+ status = "okay";
+};
+
+&pcs_mdio7 {
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+
+ en25s64: flash at 0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "bl2";
+ reg = <0 0x100000>;
+ };
+
+ partition at 100000 {
+ label = "bl3";
+ reg = <0x100000 0x200000>;
+ };
+
+ partition at 300000 {
+ label = "mcfirmware";
+ reg = <0x300000 0x200000>;
+ };
+
+ partition at 500000 {
+ label = "ubootenv";
+ reg = <0x500000 0x80000>;
+ };
+
+ partition at 580000 {
+ label = "dpl";
+ reg = <0x580000 0x40000>;
+ };
+
+ partition at 5C0000 {
+ label = "dpc";
+ reg = <0x5C0000 0x40000>;
+ };
+
+ partition at 600000 {
+ label = "devicetree";
+ reg = <0x600000 0x40000>;
+ };
+ };
+ };
+
+ nand: flash at 1 {
+ compatible = "spi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <1>;
+ spi-max-frequency = <20000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* reserved for future boot direct from NAND flash
+ * (this would use the same layout as the 8MiB NOR flash)
+ */
+ partition at 0 {
+ label = "nand-boot-reserved";
+ reg = <0 0x800000>;
+ };
+
+ /* recovery / install environment */
+ partition at 800000 {
+ label = "recovery";
+ reg = <0x800000 0x2000000>;
+ };
+
+ /* ubia (first OpenWrt) - a/b names to prevent confusion with ubi0/1/etc. */
+ partition at 2800000 {
+ label = "ubia";
+ reg = <0x2800000 0x6C00000>;
+ };
+
+ /* ubib (second OpenWrt) */
+ partition at 9400000 {
+ label = "ubib";
+ reg = <0x9400000 0x6C00000>;
+ };
+ };
+ };
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
--
2.30.1
More information about the linux-arm-kernel
mailing list