[PATCH v3 1/5] arm64: dts: ls1088a: add internal PCS for DPMAC1 node

[Mathew McBride]

A previous patch added the PCS for DPMAC2 only, as
used for the AQR PHY on the LS1088ARDB.

DPMAC1 PCS access is required for PHYLINK SFP support
on the Traverse Ten64 board.

Signed-off-by: Mathew McBride <matt at traverse.com.au>
Reviewed-by: Ioana Ciornei <ioana.ciornei at nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 2fa6cfbef01f..79ceadc9dc4a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -765,6 +765,19 @@ emdio2: mdio at 8b97000 {
 			status = "disabled";
 		};
 
+		pcs_mdio1: mdio at 8c07000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c07000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs1: ethernet-phy at 0 {
+				reg = <0>;
+			};
+		};
+
 		pcs_mdio2: mdio at 8c0b000 {
 			compatible = "fsl,fman-memac-mdio";
 			reg = <0x0 0x8c0b000 0x0 0x1000>;
-- 
2.30.1