[PATCH v2 2/8] pinctrl: samsung: Add Exynos850 SoC specific data
Krzysztof Kozlowski
krzysztof.kozlowski at canonical.com
Mon Aug 9 03:43:34 PDT 2021
On 06/08/2021 17:21, Sam Protsenko wrote:
> Add Samsung Exynos850 SoC specific data to enable pinctrl support for
> all platforms based on Exynos850.
>
> Signed-off-by: Sam Protsenko <semen.protsenko at linaro.org>
> ---
> Changes in v2:
> - Removed .suspend/.resume callbacks, as retention registers are not
> implemented yet for Exynos850
> - Removed .eint_gpio_init for AUD domain, as there are no external
> interrupts available for that domain
>
> .../pinctrl/samsung/pinctrl-exynos-arm64.c | 116 ++++++++++++++++++
> drivers/pinctrl/samsung/pinctrl-exynos.h | 29 +++++
> drivers/pinctrl/samsung/pinctrl-samsung.c | 2 +
> drivers/pinctrl/samsung/pinctrl-samsung.h | 1 +
> 4 files changed, 148 insertions(+)
>
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
> index b6e56422a700..3157bdf0233c 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
> @@ -40,6 +40,24 @@ static const struct samsung_pin_bank_type exynos5433_bank_type_alive = {
> .reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
> };
>
> +/*
> + * Bank type for non-alive type. Bit fields:
> + * CON: 4, DAT: 1, PUD: 4, DRV: 4, CONPDN: 2, PUDPDN: 4
> + */
> +static struct samsung_pin_bank_type exynos850_bank_type_off = {
> + .fld_width = { 4, 1, 4, 4, 2, 4, },
> + .reg_offset = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, },
> +};
> +
> +/*
> + * Bank type for alive type. Bit fields:
> + * CON: 4, DAT: 1, PUD: 4, DRV: 4
> + */
> +static struct samsung_pin_bank_type exynos850_bank_type_alive = {
I missed that part last time - this and one before should be const.
> + .fld_width = { 4, 1, 4, 4, },
> + .reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
> +};
> +
> /* Pad retention control code for accessing PMU regmap */
> static atomic_t exynos_shared_retention_refcnt;
>
> @@ -422,3 +440,101 @@ const struct samsung_pinctrl_of_match_data exynos7_of_data __initconst = {
> .ctrl = exynos7_pin_ctrl,
> .num_ctrl = ARRAY_SIZE(exynos7_pin_ctrl),
> };
> +
> +/* pin banks of exynos850 pin-controller 0 (ALIVE) */
> +static struct samsung_pin_bank_data exynos850_pin_banks0[] = {
All these as well - initconst - unless they are somehow different than
rest of such structures?
> + /* Must start with EINTG banks, ordered by EINT group number. */
> + EXYNOS9_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00),
> + EXYNOS9_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
> + EXYNOS9_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
> + EXYNOS9_PIN_BANK_EINTW(8, 0x060, "gpa3", 0x0c),
> + EXYNOS9_PIN_BANK_EINTW(4, 0x080, "gpa4", 0x10),
> + EXYNOS9_PIN_BANK_EINTN(3, 0x0A0, "gpq0"),
> +};
> +
> +/* pin banks of exynos850 pin-controller 1 (CMGP) */
> +static struct samsung_pin_bank_data exynos850_pin_banks1[] = {
> + /* Must start with EINTG banks, ordered by EINT group number. */
> + EXYNOS9_PIN_BANK_EINTW(1, 0x000, "gpm0", 0x00),
> + EXYNOS9_PIN_BANK_EINTW(1, 0x020, "gpm1", 0x04),
> + EXYNOS9_PIN_BANK_EINTW(1, 0x040, "gpm2", 0x08),
> + EXYNOS9_PIN_BANK_EINTW(1, 0x060, "gpm3", 0x0C),
> + EXYNOS9_PIN_BANK_EINTW(1, 0x080, "gpm4", 0x10),
> + EXYNOS9_PIN_BANK_EINTW(1, 0x0A0, "gpm5", 0x14),
> + EXYNOS9_PIN_BANK_EINTW(1, 0x0C0, "gpm6", 0x18),
> + EXYNOS9_PIN_BANK_EINTW(1, 0x0E0, "gpm7", 0x1C),
> +};
> +
> +/* pin banks of exynos850 pin-controller 2 (AUD) */
> +static struct samsung_pin_bank_data exynos850_pin_banks2[] = {
> + /* Must start with EINTG banks, ordered by EINT group number. */
> + EXYNOS9_PIN_BANK_EINTG(5, 0x000, "gpb0", 0x00),
> + EXYNOS9_PIN_BANK_EINTG(5, 0x020, "gpb1", 0x04),
> +};
> +
> +/* pin banks of exynos850 pin-controller 3 (HSI) */
> +static struct samsung_pin_bank_data exynos850_pin_banks3[] = {
> + /* Must start with EINTG banks, ordered by EINT group number. */
> + EXYNOS9_PIN_BANK_EINTG(6, 0x000, "gpf2", 0x00),
> +};
> +
> +/* pin banks of exynos850 pin-controller 4 (CORE) */
> +static struct samsung_pin_bank_data exynos850_pin_banks4[] = {
> + /* Must start with EINTG banks, ordered by EINT group number. */
> + EXYNOS9_PIN_BANK_EINTG(4, 0x000, "gpf0", 0x00),
> + EXYNOS9_PIN_BANK_EINTG(8, 0x020, "gpf1", 0x04),
> +};
> +
> +/* pin banks of exynos850 pin-controller 5 (PERI) */
> +static struct samsung_pin_bank_data exynos850_pin_banks5[] = {
> + /* Must start with EINTG banks, ordered by EINT group number. */
> + EXYNOS9_PIN_BANK_EINTG(2, 0x000, "gpg0", 0x00),
> + EXYNOS9_PIN_BANK_EINTG(6, 0x020, "gpp0", 0x04),
> + EXYNOS9_PIN_BANK_EINTG(4, 0x040, "gpp1", 0x08),
> + EXYNOS9_PIN_BANK_EINTG(4, 0x060, "gpp2", 0x0C),
> + EXYNOS9_PIN_BANK_EINTG(8, 0x080, "gpg1", 0x10),
> + EXYNOS9_PIN_BANK_EINTG(8, 0x0A0, "gpg2", 0x14),
> + EXYNOS9_PIN_BANK_EINTG(1, 0x0C0, "gpg3", 0x18),
> + EXYNOS9_PIN_BANK_EINTG(3, 0x0E0, "gpc0", 0x1C),
> + EXYNOS9_PIN_BANK_EINTG(6, 0x100, "gpc1", 0x20),
> +};
> +
> +static const struct samsung_pin_ctrl exynos850_pin_ctrl[] __initconst = {
> + {
> + /* pin-controller instance 0 ALIVE data */
> + .pin_banks = exynos850_pin_banks0,
> + .nr_banks = ARRAY_SIZE(exynos850_pin_banks0),
> + .eint_gpio_init = exynos_eint_gpio_init,
> + .eint_wkup_init = exynos_eint_wkup_init,
> + }, {
> + /* pin-controller instance 1 CMGP data */
> + .pin_banks = exynos850_pin_banks1,
> + .nr_banks = ARRAY_SIZE(exynos850_pin_banks1),
> + .eint_gpio_init = exynos_eint_gpio_init,
> + .eint_wkup_init = exynos_eint_wkup_init,
> + }, {
> + /* pin-controller instance 2 AUD data */
> + .pin_banks = exynos850_pin_banks2,
> + .nr_banks = ARRAY_SIZE(exynos850_pin_banks2),
> + }, {
> + /* pin-controller instance 3 HSI data */
> + .pin_banks = exynos850_pin_banks3,
> + .nr_banks = ARRAY_SIZE(exynos850_pin_banks3),
> + .eint_gpio_init = exynos_eint_gpio_init,
> + }, {
> + /* pin-controller instance 4 CORE data */
> + .pin_banks = exynos850_pin_banks4,
> + .nr_banks = ARRAY_SIZE(exynos850_pin_banks4),
> + .eint_gpio_init = exynos_eint_gpio_init,
> + }, {
> + /* pin-controller instance 5 PERI data */
> + .pin_banks = exynos850_pin_banks5,
> + .nr_banks = ARRAY_SIZE(exynos850_pin_banks5),
> + .eint_gpio_init = exynos_eint_gpio_init,
> + },
> +};
> +
> +const struct samsung_pinctrl_of_match_data exynos850_of_data __initconst = {
> + .ctrl = exynos850_pin_ctrl,
> + .num_ctrl = ARRAY_SIZE(exynos850_pin_ctrl),
> +};
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h
> index da1ec13697e7..595086f2d5dd 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos.h
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos.h
> @@ -108,6 +108,35 @@
> .pctl_res_idx = pctl_idx, \
> } \
>
> +#define EXYNOS9_PIN_BANK_EINTN(pins, reg, id) \
> + { \
> + .type = &exynos850_bank_type_alive, \
Having the prefix EXYNOS9 is actually confusing because:
1. There is no Exynos9 support,
2. The type is exynos850.
Let's keep it consistent, so 850 everywhere,
> + .pctl_offset = reg, \
> + .nr_pins = pins, \
> + .eint_type = EINT_TYPE_NONE, \
> + .name = id \
> + }
> +
> +#define EXYNOS9_PIN_BANK_EINTG(pins, reg, id, offs) \
> + { \
> + .type = &exynos850_bank_type_off, \
> + .pctl_offset = reg, \
> + .nr_pins = pins, \
> + .eint_type = EINT_TYPE_GPIO, \
> + .eint_offset = offs, \
> + .name = id \
> + }
> +
> +#define EXYNOS9_PIN_BANK_EINTW(pins, reg, id, offs) \
> + { \
> + .type = &exynos850_bank_type_alive, \
> + .pctl_offset = reg, \
> + .nr_pins = pins, \
> + .eint_type = EINT_TYPE_WKUP, \
> + .eint_offset = offs, \
> + .name = id \
> + }
> +
Best regards,
Krzysztof
More information about the linux-arm-kernel
mailing list