[PATCH 3/3] PCI/ACPI: Add new quirk detection, enable bcm2711

Bjorn Helgaas helgaas at kernel.org
Fri Aug 6 15:12:56 PDT 2021


In subject, this or similar would match history:

  PCI/ACPI: Add Broadcom bcm2711 MCFG quirk

On Thu, Aug 05, 2021 at 04:12:00PM -0500, Jeremy Linton wrote:
> Now that we have a bcm2711 quirk, we need to be able to
> detect it when the MCFG is missing. Use a namespace
> property as an alternative to the MCFG OEM.

Rewrap to use ~75 columns.

Mention the DT namespace property here.

> Signed-off-by: Jeremy Linton <jeremy.linton at arm.com>
> ---
>  drivers/acpi/pci_mcfg.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
> index 53cab975f612..7d77fc72c2a4 100644
> --- a/drivers/acpi/pci_mcfg.c
> +++ b/drivers/acpi/pci_mcfg.c
> @@ -169,6 +169,9 @@ static struct mcfg_fixup mcfg_quirks[] = {
>  	ALTRA_ECAM_QUIRK(1, 13),
>  	ALTRA_ECAM_QUIRK(1, 14),
>  	ALTRA_ECAM_QUIRK(1, 15),
> +
> +	{ "bcm2711", "", 0, 0, MCFG_BUS_ANY, &bcm2711_pcie_ops,
> +	  DEFINE_RES_MEM(0xFD500000, 0xA000) },
>  };
>  
>  static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
> @@ -198,8 +201,19 @@ static void pci_mcfg_apply_quirks(struct acpi_pci_root *root,
>  	u16 segment = root->segment;
>  	struct resource *bus_range = &root->secondary;
>  	struct mcfg_fixup *f;
> +	const char *soc;
>  	int i;
>  
> +	/*
> +	 * This could be a machine with a PCI/SMC conduit,
> +	 * which means it doens't have MCFG. Get the machineid from
> +	 * the namespace definition instead.

s/SMC/SMCCC/ ?  Cover letter uses SMCCC (not sure it's relevant anyway)
s/doens't/doesn't/

Rewrap comment to use ~80 columns.

Seems pretty reasonable that a platform without standard ECAM might
not have MCFG, since MCFG basically implies ECAM.

Is "linux,pcie-quirk" the right property to look for?  It doesn't
sound very generic, and it doesn't sound like anything related to
ECAM.  Is it new?  I don't see it in the tree yet.  Should it be in
Documentation/devicetree/bindings/pci/pci.txt so we don't get a
different property name for every new platform?

> +	 */
> +	if (!fwnode_property_read_string(acpi_fwnode_handle(root->device),
> +					 "linux,pcie-quirk", &soc)) {
> +		memcpy(mcfg_oem_id, soc, ACPI_OEM_ID_SIZE);
> +	}
> +
>  	for (i = 0, f = mcfg_quirks; i < ARRAY_SIZE(mcfg_quirks); i++, f++) {
>  		if (pci_mcfg_quirk_matches(f, segment, bus_range)) {
>  			if (f->cfgres.start)
> -- 
> 2.31.1
> 



More information about the linux-arm-kernel mailing list