[PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series

[Matthew Hagan]

Changes from v2:
  - Introduce boards to Makefile in same patch as the board dts is added
    (Vladimir Oltean)
  - Use alphabetical ordering for labels (Vladimir Oltean)
  - Remove address-cells and size-cells in qca8337 switch nodes (Vladimir
    Oltean)
  - Remove "cpu" labels from switch nodes' CPU ports (Vladimir Oltean)
  - Various LED fixes, utilising dt-bindings/leds/common.h and correctly
    specifying LEDs in the form "led-N" and with the color/function/
    function-enumerator properties.
  - Fix PWM LEDs and corresponding pinctrl bindings. (Vladimir Oltean)

The following changes were submitted as a separate series:
  - Introduce patches to disable QSPI by default and enable where used
    (Vladimir Oltean)
  - Move mdio at 18032000 node from board related file to SoC (Vladimir
    Oltean)
  - In addition to above, relocate mdio-mux to bcm-nsp.dtsi and fix
    the resulting usb3_phy issues

Changes from v3:
  - Sort labels on mx64 a0 dts files into alphabetical order as well
  - move include directives for input/input.h and leds/common.h to
    bcm958625-mx6x-common.dtsi
  - Whitespace fixes in bcm958625-mx6x-common.dtsi
  - rename "senao_nvram" partition to "nvram" 

Changes from v4:
  - Move chosen and memory nodes from bcm958625-mx6x-common.dtsi to
    each .dts file (Arnd Bergmann).
  - Append [@<unit-address>] to memory nodes.
  - Create Ax stepping-specific dtsi for Ax devices (Arnd Bergmann).
  - Append read-only property to at24 eeprom node.
  - Remove L2 properties which should be defined at platform-level.
  - Correct NAND node names.

Matthew Hagan (5):
  ARM: dts: NSP: Add common bindings for MX64/MX65
  ARM: dts: NSP: Add Ax stepping modifications
  ARM: dts: NSP: Add DT files for Meraki MX64 series
  ARM: dts: NSP: Add DT files for Meraki MX65 series
  dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65

 .../devicetree/bindings/arm/bcm/brcm,nsp.yaml |   6 +
 arch/arm/boot/dts/Makefile                    |   6 +
 arch/arm/boot/dts/bcm-nsp-ax.dtsi             |  71 +++++
 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 279 ++++++++++++++++++
 .../boot/dts/bcm958625-meraki-kingpin.dtsi    | 163 ++++++++++
 .../arm/boot/dts/bcm958625-meraki-mx64-a0.dts |  25 ++
 arch/arm/boot/dts/bcm958625-meraki-mx64.dts   |  24 ++
 .../boot/dts/bcm958625-meraki-mx64w-a0.dts    |  33 +++
 arch/arm/boot/dts/bcm958625-meraki-mx64w.dts  |  32 ++
 arch/arm/boot/dts/bcm958625-meraki-mx65.dts   |  24 ++
 arch/arm/boot/dts/bcm958625-meraki-mx65w.dts  |  32 ++
 .../dts/bcm958625-meraki-mx6x-common.dtsi     | 129 ++++++++
 12 files changed, 824 insertions(+)
 create mode 100644 arch/arm/boot/dts/bcm-nsp-ax.dtsi
 create mode 100644 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
 create mode 100644 arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
 create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
 create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64.dts
 create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
 create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
 create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65.dts
 create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
 create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi

-- 
2.26.3