[PATCH] arm64: zynqmp: Enable gpio and qspi for zc1275-revA

[Michal Simek]

Add missing gpio and qspio for zc1275-revA board.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 .../boot/dts/xilinx/zynqmp-zc1275-revA.dts     | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts
index 66a90483b004..e971ba8c1418 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZC1275
  *
- * (C) Copyright 2017 - 2019, Xilinx, Inc.
+ * (C) Copyright 2017 - 2021, Xilinx, Inc.
  *
  * Michal Simek <michal.simek at xilinx.com>
  * Siva Durga Prasad Paladugu <sivadur at xilinx.com>
@@ -20,6 +20,7 @@ / {
 	aliases {
 		serial0 = &uart0;
 		serial1 = &dcc;
+		spi0 = &qspi;
 	};
 
 	chosen {
@@ -37,6 +38,21 @@ &dcc {
 	status = "okay";
 };
 
+&gpio {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	flash at 0 {
+		compatible = "m25p80", "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>;
+	};
+};
+
 &uart0 {
 	status = "okay";
 };
-- 
2.32.0