[PATCH] arm64: dts: ls1046a: fix eeprom entries

[Raag Jadav]

On Mon, Aug 02, 2021 at 05:44:29PM -0500, Li Yang wrote:
> On Mon, Aug 2, 2021 at 1:10 PM Raag Jadav <raagjadav at gmail.com> wrote:
> >
> > ls1046afrwy and ls1046ardb boards have CAT24C04[1] and CAT24C05[2]
> > eeproms respectively. Both are 4Kb (512 bytes) in size.
> 
> These part names are from onsemi instead of atmel.  Are there same
> part names from atmel which are also compatible with the onsemi parts?

The part names are different, but they are functionally compatible.

>  If we want to use onsemi only part names, probably we will need two
> compatible strings with the first one from onsemi and the second from
> atmel.  Although the binding doesn't support onsemi prefix yet.

Should I add it to the at24 binding document with atmel as a fallback?

> 
> > Remove multi-address entries, as we have auto-rollover support
> > in at24 driver.
> 
> The device tree should describe hardware instead of matching how
> driver deal with it.  Is the board really using a single chip or
> multiple chips here?

Yes, both the boards have a single chip each.

> 
> >
> > [1] https://www.onsemi.com/pdf/datasheet/cat24c01-d.pdf
> > [2] https://www.onsemi.com/pdf/datasheet/cat24c03-d.pdf
> >
> > Signed-off-by: Raag Jadav <raagjadav at gmail.com>
> > ---
> >  arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts | 8 +-------
> >  arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts  | 7 +------
> >  2 files changed, 2 insertions(+), 13 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
> > index db3d303..83afe21 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
> > @@ -83,15 +83,9 @@
> >                         };
> >
> >                         eeprom at 52 {
> > -                               compatible = "atmel,24c512";
> > +                               compatible = "atmel,24c04";
> >                                 reg = <0x52>;
> >                         };
> > -
> > -                       eeprom at 53 {
> > -                               compatible = "atmel,24c512";
> > -                               reg = <0x53>;
> > -                       };
> > -
> >                 };
> >         };
> >  };
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> > index 60acdf0..d220f98 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> > @@ -59,14 +59,9 @@
> >         };
> >
> >         eeprom at 52 {
> > -               compatible = "atmel,24c512";
> > +               compatible = "atmel,24c04";
> >                 reg = <0x52>;
> >         };
> > -
> > -       eeprom at 53 {
> > -               compatible = "atmel,24c512";
> > -               reg = <0x53>;
> > -       };
> >  };
> >
> >  &i2c3 {
> > --
> > 2.7.4
> >