[PATCH 9/9] arm64: dts: broadcom: Add reference to RPi CM4 IO Board

[Stefan Wahren]

This adds a reference to the dts of the Raspberry Pi Compute Module 4
IO Board, so we don't need to maintain the content in arm64.

Signed-off-by: Stefan Wahren <stefan.wahren at i2se.com>
---
 arch/arm64/boot/dts/broadcom/Makefile               | 1 +
 arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts | 2 ++
 2 files changed, 3 insertions(+)
 create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts

diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index 11eae3e..c688203 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
 			      bcm2711-rpi-4-b.dtb \
+			      bcm2711-rpi-cm4-io.dtb \
 			      bcm2837-rpi-3-a-plus.dtb \
 			      bcm2837-rpi-3-b.dtb \
 			      bcm2837-rpi-3-b-plus.dtb \
diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
new file mode 100644
index 0000000..e36d395
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/bcm2711-rpi-cm4-io.dts"
-- 
2.7.4