[PATCH v4 62/79] media: exynos4-is: use pm_runtime_resume_and_get()
Jonathan Cameron
Jonathan.Cameron at Huawei.com
Fri Apr 30 18:49:11 BST 2021
On Wed, 28 Apr 2021 16:52:23 +0200
Mauro Carvalho Chehab <mchehab+huawei at kernel.org> wrote:
> Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
> added pm_runtime_resume_and_get() in order to automatically handle
> dev->power.usage_count decrement on errors.
>
> Use the new API, in order to cleanup the error check logic.
>
> Reviewed-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei at kernel.org>
> ---
> drivers/media/platform/exynos4-is/fimc-capture.c | 6 ++----
> drivers/media/platform/exynos4-is/fimc-is.c | 4 ++--
> drivers/media/platform/exynos4-is/fimc-isp-video.c | 3 +--
> drivers/media/platform/exynos4-is/fimc-isp.c | 7 +++----
> drivers/media/platform/exynos4-is/fimc-lite.c | 5 +++--
> drivers/media/platform/exynos4-is/fimc-m2m.c | 2 +-
> drivers/media/platform/exynos4-is/media-dev.c | 8 +++-----
> drivers/media/platform/exynos4-is/mipi-csis.c | 8 +++-----
> 8 files changed, 18 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c
> index 13c838d3f947..0da36443173c 100644
> --- a/drivers/media/platform/exynos4-is/fimc-capture.c
> +++ b/drivers/media/platform/exynos4-is/fimc-capture.c
> @@ -478,11 +478,9 @@ static int fimc_capture_open(struct file *file)
> goto unlock;
>
> set_bit(ST_CAPT_BUSY, &fimc->state);
> - ret = pm_runtime_get_sync(&fimc->pdev->dev);
> - if (ret < 0) {
> - pm_runtime_put_sync(&fimc->pdev->dev);
> + ret = pm_runtime_resume_and_get(&fimc->pdev->dev);
> + if (ret < 0)
> goto unlock;
> - }
>
> ret = v4l2_fh_open(file);
> if (ret) {
> diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c
> index 972d9601d236..1b24f5bfc4af 100644
> --- a/drivers/media/platform/exynos4-is/fimc-is.c
> +++ b/drivers/media/platform/exynos4-is/fimc-is.c
> @@ -828,9 +828,9 @@ static int fimc_is_probe(struct platform_device *pdev)
> goto err_irq;
> }
>
> - ret = pm_runtime_get_sync(dev);
> + ret = pm_runtime_resume_and_get(dev);
> if (ret < 0)
> - goto err_pm;
> + goto err_irq;
>
I think the pm_runtime_put_noidle() below err_pm: should become
a pm_runtime_put() because otherwise we won't call fimc_is_runtime_suspend()
if runtime pm is enabled (either directly or via runtime pm count becoming zero.
(not I'm not 100% sure of my argument here...)
> vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
>
> diff --git a/drivers/media/platform/exynos4-is/fimc-isp-video.c b/drivers/media/platform/exynos4-is/fimc-isp-video.c
> index 612b9872afc8..8d9dc597deaa 100644
> --- a/drivers/media/platform/exynos4-is/fimc-isp-video.c
> +++ b/drivers/media/platform/exynos4-is/fimc-isp-video.c
> @@ -275,7 +275,7 @@ static int isp_video_open(struct file *file)
> if (ret < 0)
> goto unlock;
>
> - ret = pm_runtime_get_sync(&isp->pdev->dev);
> + ret = pm_runtime_resume_and_get(&isp->pdev->dev);
> if (ret < 0)
> goto rel_fh;
>
> @@ -293,7 +293,6 @@ static int isp_video_open(struct file *file)
> if (!ret)
> goto unlock;
So the good path is to jump over the block. I'd just unlock and return here
to make it more readable but unrelated to this patch.
> rel_fh:
> - pm_runtime_put_noidle(&isp->pdev->dev);
Logic flow here isn't very standard, but with this change, you'll not
call anything to unwind a successful call to pm_runtime_resume_and_get if
fmic_pipeline_call() returns and error.
My guess is pm_runtime_put_sync() is needed before rel_fh; to balance this.
> v4l2_fh_release(file);
> unlock:
> mutex_unlock(&isp->video_lock);
> diff --git a/drivers/media/platform/exynos4-is/fimc-isp.c b/drivers/media/platform/exynos4-is/fimc-isp.c
> index a77c49b18511..74b49d30901e 100644
> --- a/drivers/media/platform/exynos4-is/fimc-isp.c
> +++ b/drivers/media/platform/exynos4-is/fimc-isp.c
> @@ -304,11 +304,10 @@ static int fimc_isp_subdev_s_power(struct v4l2_subdev *sd, int on)
> pr_debug("on: %d\n", on);
>
> if (on) {
> - ret = pm_runtime_get_sync(&is->pdev->dev);
> - if (ret < 0) {
> - pm_runtime_put(&is->pdev->dev);
> + ret = pm_runtime_resume_and_get(&is->pdev->dev);
> + if (ret < 0)
> return ret;
> - }
> +
> set_bit(IS_ST_PWR_ON, &is->state);
>
> ret = fimc_is_start_firmware(is);
> diff --git a/drivers/media/platform/exynos4-is/fimc-lite.c b/drivers/media/platform/exynos4-is/fimc-lite.c
> index fe20af3a7178..4d8b18078ff3 100644
> --- a/drivers/media/platform/exynos4-is/fimc-lite.c
> +++ b/drivers/media/platform/exynos4-is/fimc-lite.c
> @@ -469,9 +469,9 @@ static int fimc_lite_open(struct file *file)
> }
>
> set_bit(ST_FLITE_IN_USE, &fimc->state);
> - ret = pm_runtime_get_sync(&fimc->pdev->dev);
> + ret = pm_runtime_resume_and_get(&fimc->pdev->dev);
> if (ret < 0)
> - goto err_pm;
> + goto err_in_use;
>
> ret = v4l2_fh_open(file);
> if (ret < 0)
> @@ -499,6 +499,7 @@ static int fimc_lite_open(struct file *file)
> v4l2_fh_release(file);
> err_pm:
> pm_runtime_put_sync(&fimc->pdev->dev);
> +err_in_use:
> clear_bit(ST_FLITE_IN_USE, &fimc->state);
> unlock:
> mutex_unlock(&fimc->lock);
> diff --git a/drivers/media/platform/exynos4-is/fimc-m2m.c b/drivers/media/platform/exynos4-is/fimc-m2m.c
> index c9704a147e5c..7c1eb05c508f 100644
> --- a/drivers/media/platform/exynos4-is/fimc-m2m.c
> +++ b/drivers/media/platform/exynos4-is/fimc-m2m.c
> @@ -75,7 +75,7 @@ static int start_streaming(struct vb2_queue *q, unsigned int count)
> struct fimc_ctx *ctx = q->drv_priv;
> int ret;
>
> - ret = pm_runtime_get_sync(&ctx->fimc_dev->pdev->dev);
> + ret = pm_runtime_resume_and_get(&ctx->fimc_dev->pdev->dev);
Use the fact pm_runtime_resume_and_get only returns 0 or < 0 to
make this
return pm_runtime_resume_and_get()
> return ret > 0 ? 0 : ret;
> }
>
> diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
> index 13d192ba4aa6..9346d44a06c2 100644
> --- a/drivers/media/platform/exynos4-is/media-dev.c
> +++ b/drivers/media/platform/exynos4-is/media-dev.c
> @@ -512,11 +512,9 @@ static int fimc_md_register_sensor_entities(struct fimc_md *fmd)
> if (!fmd->pmf)
> return -ENXIO;
>
> - ret = pm_runtime_get_sync(fmd->pmf);
> - if (ret < 0) {
> - pm_runtime_put(fmd->pmf);
> + ret = pm_runtime_resume_and_get(fmd->pmf);
> + if (ret < 0)
> return ret;
> - }
>
> fmd->num_sensors = 0;
>
> @@ -1291,7 +1289,7 @@ static int cam_clk_prepare(struct clk_hw *hw)
> if (camclk->fmd->pmf == NULL)
> return -ENODEV;
>
> - ret = pm_runtime_get_sync(camclk->fmd->pmf);
> + ret = pm_runtime_resume_and_get(camclk->fmd->pmf);
return pm_...
> return ret < 0 ? ret : 0;
> }
>
> diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c
> index 1aac167abb17..2a6afb78a049 100644
> --- a/drivers/media/platform/exynos4-is/mipi-csis.c
> +++ b/drivers/media/platform/exynos4-is/mipi-csis.c
> @@ -494,7 +494,7 @@ static int s5pcsis_s_power(struct v4l2_subdev *sd, int on)
> struct device *dev = &state->pdev->dev;
>
> if (on)
> - return pm_runtime_get_sync(dev);
> + return pm_runtime_resume_and_get(dev);
>
> return pm_runtime_put_sync(dev);
> }
> @@ -509,11 +509,9 @@ static int s5pcsis_s_stream(struct v4l2_subdev *sd, int enable)
>
> if (enable) {
> s5pcsis_clear_counters(state);
> - ret = pm_runtime_get_sync(&state->pdev->dev);
> - if (ret && ret != 1) {
> - pm_runtime_put_noidle(&state->pdev->dev);
> + ret = pm_runtime_resume_and_get(&state->pdev->dev);
> + if (ret && ret != 1)
It won't be equal to 1 as pm_runtime_resume_and_get only returns <= 0
> return ret;
> - }
> }
>
> mutex_lock(&state->lock);
More information about the linux-arm-kernel
mailing list