[PATCH] dmaengine: xilinx: dpdma: request_irq after initializing dma channels

quanyang.wang quanyang.wang at windriver.com
Fri Apr 30 07:56:46 BST 2021


Hi Michal,

On 4/30/21 2:51 PM, Michal Simek wrote:
> Hi,
>
> On 4/30/21 3:45 AM, quanyang.wang wrote:
>> Hi Laurent,
>>
>> On 4/30/21 8:36 AM, Laurent Pinchart wrote:
>>> Hi Quanyang,
>>>
>>> Thank you for the patch.
>>>
>>> On Thu, Apr 29, 2021 at 02:58:21PM +0800, quanyang.wang at windriver.com
>>> wrote:
>>>> From: Quanyang Wang <quanyang.wang at windriver.com>
>>>>
>>>> In some scenarios (kdump), dpdma hardware irqs has been enabled when
>>>> calling request_irq in probe function, and then the dpdma irq handler
>>>> xilinx_dpdma_irq_handler is invoked to access xdev->chan[i]. But at
>>>> this moment xdev->chan[i] hasn't been initialized. So let's call the
>>>> request_irq after initializing dma channels to avoid kdump kernel
>>>> crash as below:
>>>>
>>>> [    3.696128] Unable to handle kernel NULL pointer dereference at
>>>> virtual address 000000000000012c
>>>> [    3.696710] xilinx-zynqmp-dpdma fd4c0000.dma-controller: Xilinx
>>>> DPDMA engine is probed
>>>> [    3.704900] Mem abort info:
>>>> [    3.704902]   ESR = 0x96000005
>>>> [    3.704905]   EC = 0x25: DABT (current EL), IL = 32 bits
>>>> [    3.704907]   SET = 0, FnV = 0
>>>> [    3.704912]   EA = 0, S1PTW = 0
>>>> [    3.713800] ahci-ceva fd0c0000.ahci: supply ahci not found, using
>>>> dummy regulator
>>>> [    3.715585] Data abort info:
>>>> [    3.715587]   ISV = 0, ISS = 0x00000005
>>>> [    3.715589]   CM = 0, WnR = 0
>>>> [    3.715592] [000000000000012c] user address but active_mm is swapper
>>>> [    3.715596] Internal error: Oops: 96000005 [#1] SMP
>>>> [    3.715599] Modules linked in:
>>>> [    3.715608] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
>>>> 5.10.0-12170-g60894882155f-dirty #77
>>>> [    3.723937] Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
>>>> [    3.723942] pstate: 80000085 (Nzcv daIf -PAN -UAO -TCO BTYPE=--)
>>>> [    3.723956] pc : xilinx_dpdma_irq_handler+0x418/0x560
>>>> [    3.793049] lr : xilinx_dpdma_irq_handler+0x3d8/0x560
>>>> [    3.798089] sp : ffffffc01186bdf0
>>>> [    3.801388] x29: ffffffc01186bdf0 x28: ffffffc011836f28
>>>> [    3.806692] x27: ffffff8023e0ac80 x26: 0000000000000080
>>>> [    3.811996] x25: 0000000008000408 x24: 0000000000000003
>>>> [    3.817300] x23: ffffffc01186be70 x22: ffffffc011291740
>>>> [    3.822604] x21: 0000000000000000 x20: 0000000008000408
>>>> [    3.827908] x19: 0000000000000000 x18: 0000000000000010
>>>> [    3.833212] x17: 0000000000000000 x16: 0000000000000000
>>>> [    3.838516] x15: 0000000000000000 x14: ffffffc011291740
>>>> [    3.843820] x13: ffffffc02eb4d000 x12: 0000000034d4d91d
>>>> [    3.849124] x11: 0000000000000040 x10: ffffffc0112d2d48
>>>> [    3.854428] x9 : ffffffc0112d2d40 x8 : ffffff8021c00268
>>>> [    3.859732] x7 : 0000000000000000 x6 : ffffffc011836000
>>>> [    3.865036] x5 : 0000000000000003 x4 : 0000000000000000
>>>> [    3.870340] x3 : 0000000000000001 x2 : 0000000000000000
>>>> [    3.875644] x1 : 0000000000000000 x0 : 000000000000012c
>>>> [    3.880948] Call trace:
>>>> [    3.883382]  xilinx_dpdma_irq_handler+0x418/0x560
>>>> [    3.888079]  __handle_irq_event_percpu+0x5c/0x178
>>>> [    3.892774]  handle_irq_event_percpu+0x34/0x98
>>>> [    3.897210]  handle_irq_event+0x44/0xb8
>>>> [    3.901030]  handle_fasteoi_irq+0xd0/0x190
>>>> [    3.905117]  generic_handle_irq+0x30/0x48
>>>> [    3.909111]  __handle_domain_irq+0x64/0xc0
>>>> [    3.913192]  gic_handle_irq+0x78/0xa0
>>>> [    3.916846]  el1_irq+0xc4/0x180
>>>> [    3.919982]  cpuidle_enter_state+0x134/0x2f8
>>>> [    3.924243]  cpuidle_enter+0x38/0x50
>>>> [    3.927810]  call_cpuidle+0x1c/0x40
>>>> [    3.931290]  do_idle+0x20c/0x270
>>>> [    3.934502]  cpu_startup_entry+0x28/0x58
>>>> [    3.938410]  rest_init+0xbc/0xcc
>>>> [    3.941631]  arch_call_rest_init+0x10/0x1c
>>>> [    3.945718]  start_kernel+0x51c/0x558
>>>>
>>>> Fixes: 7cbb0c63de3f ("dmaengine: xilinx: dpdma: Add the Xilinx
>>>> DisplayPort DMA engine driver")
>>>> Signed-off-by: Quanyang Wang <quanyang.wang at windriver.com>
>>>> ---
>>>>    drivers/dma/xilinx/xilinx_dpdma.c | 30 +++++++++++++++---------------
>>>>    1 file changed, 15 insertions(+), 15 deletions(-)
>>>>
>>>> diff --git a/drivers/dma/xilinx/xilinx_dpdma.c
>>>> b/drivers/dma/xilinx/xilinx_dpdma.c
>>>> index 70b29bd079c9..0b599402c53f 100644
>>>> --- a/drivers/dma/xilinx/xilinx_dpdma.c
>>>> +++ b/drivers/dma/xilinx/xilinx_dpdma.c
>>>> @@ -1622,19 +1622,6 @@ static int xilinx_dpdma_probe(struct
>>>> platform_device *pdev)
>>>>        if (IS_ERR(xdev->reg))
>>>>            return PTR_ERR(xdev->reg);
>>>>    -    xdev->irq = platform_get_irq(pdev, 0);
>>>> -    if (xdev->irq < 0) {
>>>> -        dev_err(xdev->dev, "failed to get platform irq\n");
>>>> -        return xdev->irq;
>>>> -    }
>>>> -
>>>> -    ret = request_irq(xdev->irq, xilinx_dpdma_irq_handler, IRQF_SHARED,
>>>> -              dev_name(xdev->dev), xdev);
>>>> -    if (ret) {
>>>> -        dev_err(xdev->dev, "failed to request IRQ\n");
>>>> -        return ret;
>>>> -    }
>>>> -
>>>>        ddev = &xdev->common;
>>>>        ddev->dev = &pdev->dev;
>>>>    @@ -1688,6 +1675,19 @@ static int xilinx_dpdma_probe(struct
>>>> platform_device *pdev)
>>>>            goto error_of_dma;
>>>>        }
>>>>    +    xdev->irq = platform_get_irq(pdev, 0);
>>>> +    if (xdev->irq < 0) {
>>>> +        dev_err(xdev->dev, "failed to get platform irq\n");
>>> As reported by the kbuild bot, ret isn't initialized here.
>> I will fix this in V2.
>>>> +        goto error_irq;
>>>> +    }
>>> This part could stay where it was, just after
>>> devm_platform_ioremap_resource().
>> OK,I will move it back.
>>>> +
>>>> +    ret = request_irq(xdev->irq, xilinx_dpdma_irq_handler, IRQF_SHARED,
>>>> +              dev_name(xdev->dev), xdev);
>>>> +    if (ret) {
>>>> +        dev_err(xdev->dev, "failed to request IRQ\n");
>>>> +        goto error_irq;
>>>> +    }
>>> Ideally we should reset the device before requesting the IRQ, to ensure
>>> we start in a consistent state. There doesn't seem to be any global
>>> reset unfortunately. Shouldn't we at least disable interrupts ? It may
>>> be a bit pointless though as we reenable them right below, so I suppose
>>> this would be OK.
>> Yes, we should start in a consistent and clean state. I will disable
>> interrupts
>>
>> and clean up registers state in V2.
>>
>>>> +
>>>>        xilinx_dpdma_enable_irq(xdev);
>>>>          xilinx_dpdma_debugfs_init(xdev);
>>>> @@ -1696,6 +1696,8 @@ static int xilinx_dpdma_probe(struct
>>>> platform_device *pdev)
>>>>          return 0;
>>>>    +error_irq:
>>>> +    of_dma_controller_free(pdev->dev.of_node);
>>> Why not free_irq() ? This change isn't described in the commit message.
>> I will add it in V2.
> When I was checking it that request_irq was called last. It means it
> wasn't necessary to free irq in error path. But double check it.

Thank you very much for your reminder.

Yes, free_irq is not necessary, and I have abandoned all modifications 
of V1 and

make a new V2 patch.

Thanks,

Quanyang

>
> M
>



More information about the linux-arm-kernel mailing list