[PATCH] PCI: mediatek: Verify whether the free_ck clock is ungated or not

[Amey Narkhede]

On 21/04/29 05:38PM, Bjorn Helgaas wrote:
> Can you make the subject say something at a higher level instead of
> just paraphrasing the C code?  I'm guessing this means resume will now
> fail if the clock isn't turned on?
>
> On Thu, Apr 29, 2021 at 07:17:49PM +0530, Amey Narkhede wrote:
> > Verify that the free_ck clock is ungated on device resume
> > by checking return value of clk_prepare_enable().
>
> Also the commit log -- this doesn't say anything more than the code
> itself.  Did you find this by tripping over it?  Or just by code
> inspection?  I guess without the check, we continue on and try to
> resume, but accesses to PCI devices fail and maybe return ~0 data or
> cause machine checks or something?
>
I found this with code inspection. Sorry for the unclear commit
messsage. I'll try to clarify it in v2.
> > Signed-off-by: Amey Narkhede <ameynarkhede03 at gmail.com>
> > ---
> >  drivers/pci/controller/pcie-mediatek.c | 5 ++++-
> >  1 file changed, 4 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
> > index 23548b517..9b13214bf 100644
> > --- a/drivers/pci/controller/pcie-mediatek.c
> > +++ b/drivers/pci/controller/pcie-mediatek.c
> > @@ -1154,11 +1154,14 @@ static int __maybe_unused mtk_pcie_resume_noirq(struct device *dev)
> >  {
> >  	struct mtk_pcie *pcie = dev_get_drvdata(dev);
> >  	struct mtk_pcie_port *port, *tmp;
> > +	int ret;
> >
> >  	if (list_empty(&pcie->ports))
> >  		return 0;
> >
> > -	clk_prepare_enable(pcie->free_ck);
> > +	ret = clk_prepare_enable(pcie->free_ck);
> > +	if (ret)
> > +		return ret;
>
> Most callers print an error message when clk_prepare_enable() fails.
>
[...]
I'll update this in v2.

Thanks,
Amey