[PATCH V2 4/4] soc: imx: Add blk-ctl driver for i.MX8MM

Peng Fan (OSS) peng.fan at oss.nxp.com
Fri Apr 30 06:27:46 BST 2021


From: Peng Fan <peng.fan at nxp.com>

The i.MX8MM SoC has dispmix BLK-CTL and vpumix BLK-CTL, so we add
that support in this driver.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 drivers/soc/imx/Makefile         |   2 +-
 drivers/soc/imx/blk-ctl-imx8mm.c | 138 +++++++++++++++++++++++++++++++
 2 files changed, 139 insertions(+), 1 deletion(-)
 create mode 100644 drivers/soc/imx/blk-ctl-imx8mm.c

diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile
index d3d2b49a386c..c260b962f495 100644
--- a/drivers/soc/imx/Makefile
+++ b/drivers/soc/imx/Makefile
@@ -4,4 +4,4 @@ obj-$(CONFIG_ARCH_MXC) += soc-imx.o
 endif
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
-obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o blk-ctl.o
+obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o blk-ctl.o blk-ctl-imx8mm.o
diff --git a/drivers/soc/imx/blk-ctl-imx8mm.c b/drivers/soc/imx/blk-ctl-imx8mm.c
new file mode 100644
index 000000000000..77e0a5d3fdac
--- /dev/null
+++ b/drivers/soc/imx/blk-ctl-imx8mm.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021 NXP
+ */
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+#include <dt-bindings/power/imx8mm-power.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/pm_domain.h>
+#include <linux/regmap.h>
+
+#include "blk-ctl.h"
+
+#define MEDIA_BLK_BUS_RSTN_BLK_SYNC_SFT_EN			BIT(6)
+#define MEDIA_BLK_MIPI_DSI_I_PRESETN_SFT_EN			BIT(5)
+#define MEDIA_BLK_MIPI_CSI_I_PRESETN_SFT_EN			BIT(4)
+#define MEDIA_BLK_CAMERA_PIXEL_RESET_N_SFT_EN			BIT(3)
+#define MEDIA_BLK_CSI_BRIDGE_SFT_EN				GENMASK(2, 0)
+
+#define MEDIA_BLK_BUS_PD_MASK					BIT(12)
+#define MEDIA_BLK_MIPI_CSI_PD_MASK				GENMASK(11, 10)
+#define MEDIA_BLK_MIPI_DSI_PD_MASK				GENMASK(9, 8)
+#define MEDIA_BLK_LCDIF_PD_MASK					GENMASK(7, 6)
+#define MEDIA_BLK_CSI_BRIDGE_PD_MASK				GENMASK(5, 0)
+
+static struct imx_blk_ctl_hw imx8mm_dispmix_blk_ctl_pds[] = {
+	IMX_BLK_CTL_PD("CSI_BRIDGE", "dispmix", IMX8MM_BLK_CTL_DISPMIX_CSI_BRIDGE, 0x4,
+		       MEDIA_BLK_CSI_BRIDGE_PD_MASK, 0, MEDIA_BLK_CSI_BRIDGE_SFT_EN,
+		       IMX_BLK_CTL_PD_RESET),
+	IMX_BLK_CTL_PD("LCDIF", "dispmix", IMX8MM_BLK_CTL_DISPMIX_LCDIF, 0x4,
+		       MEDIA_BLK_LCDIF_PD_MASK, -1, -1, 0),
+	IMX_BLK_CTL_PD("MIPI_DSI", "mipi", IMX8MM_BLK_CTL_DISPMIX_MIPI_DSI, 0x4,
+		       MEDIA_BLK_MIPI_DSI_PD_MASK, 0, MEDIA_BLK_MIPI_DSI_I_PRESETN_SFT_EN,
+		       IMX_BLK_CTL_PD_RESET),
+	IMX_BLK_CTL_PD("MIPI_CSI", "mipi", IMX8MM_BLK_CTL_DISPMIX_MIPI_CSI, 0x4,
+		       MEDIA_BLK_MIPI_CSI_PD_MASK, 0,
+		       MEDIA_BLK_MIPI_CSI_I_PRESETN_SFT_EN | MEDIA_BLK_CAMERA_PIXEL_RESET_N_SFT_EN,
+		       IMX_BLK_CTL_PD_RESET)
+};
+
+static struct imx_blk_ctl_hw imx8mm_vpumix_blk_ctl_pds[] = {
+	IMX_BLK_CTL_PD("VPU_BLK_CTL_G2", "vpu-g2", IMX8MM_BLK_CTL_G2_PD, 0x4,
+		       BIT(0), 0, BIT(0), IMX_BLK_CTL_PD_RESET),
+	IMX_BLK_CTL_PD("VPU_BLK_CTL_G1", "vpu-g1", IMX8MM_BLK_CTL_G1_PD, 0x4,
+		       BIT(1), 0, BIT(1), IMX_BLK_CTL_PD_RESET),
+	IMX_BLK_CTL_PD("VPU_BLK_CTL_H1", "vpu-h1", IMX8MM_BLK_CTL_H1_PD, 0x4,
+		       BIT(2), 0, BIT(2), IMX_BLK_CTL_PD_HANDSHAKE | IMX_BLK_CTL_PD_RESET),
+};
+
+static const struct regmap_config imx8mm_blk_ctl_regmap_config = {
+	.reg_bits		= 32,
+	.reg_stride		= 4,
+	.val_bits		= 32,
+	.max_register		= 0x30,
+	.fast_io		= true,
+};
+
+static const struct imx_blk_ctl_dev_data imx8mm_vpumix_blk_ctl_dev_data = {
+	.pds = imx8mm_vpumix_blk_ctl_pds,
+	.pds_num = ARRAY_SIZE(imx8mm_vpumix_blk_ctl_pds),
+	.hw_hsk = IMX_BLK_CTL_PD(NULL, NULL, IMX8MM_BLK_CTL_H1_PD, 0x4, BIT(2), 0, BIT(2),
+				 IMX_BLK_CTL_PD_HANDSHAKE),
+	.config = imx8mm_blk_ctl_regmap_config,
+	.active_pd_names = (char*[]){"vpumix", "g1", "g2", "h1"},
+	.num_active_pd = 4,
+};
+
+static const struct imx_blk_ctl_dev_data imx8mm_dispmix_blk_ctl_dev_data = {
+	.pds = imx8mm_dispmix_blk_ctl_pds,
+	.pds_num = ARRAY_SIZE(imx8mm_dispmix_blk_ctl_pds),
+	.hw_hsk = IMX_BLK_CTL_PD(NULL, NULL, -1, 0x4, MEDIA_BLK_BUS_PD_MASK, 0,
+				 MEDIA_BLK_BUS_RSTN_BLK_SYNC_SFT_EN,
+				 IMX_BLK_CTL_PD_HANDSHAKE | IMX_BLK_CTL_PD_RESET),
+	.config = imx8mm_blk_ctl_regmap_config,
+	.active_pd_names = (char*[]){"dispmix", "mipi"},
+	.num_active_pd = 2,
+};
+
+static int imx8mm_blk_ctl_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct imx_blk_ctl_dev_data *dev_data = of_device_get_match_data(dev);
+	struct regmap *regmap;
+	struct resource *res;
+	struct imx_blk_ctl *ctl;
+	void __iomem *base;
+
+	ctl = devm_kzalloc(dev, sizeof(*ctl), GFP_KERNEL);
+	if (!ctl)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	regmap = devm_regmap_init_mmio(dev, base, &dev_data->config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	ctl->regmap = regmap;
+	ctl->dev = dev;
+	atomic_set(&ctl->power_count, 0);
+
+	ctl->num_clks = devm_clk_bulk_get_all(dev, &ctl->clks);
+	if (ctl->num_clks < 0)
+		return ctl->num_clks;
+
+	dev_set_drvdata(dev, ctl);
+	ctl->dev_data = of_device_get_match_data(dev);
+
+	return imx_blk_ctl_register(dev);
+}
+
+static const struct of_device_id imx_blk_ctl_of_match[] = {
+	{ .compatible = "fsl,imx8mm-vpumix-blk-ctl", .data = &imx8mm_vpumix_blk_ctl_dev_data },
+	{ .compatible = "fsl,imx8mm-dispmix-blk-ctl", .data = &imx8mm_dispmix_blk_ctl_dev_data },
+	{ /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_blk_ctl_of_match);
+
+static struct platform_driver imx_blk_ctl_driver = {
+	.probe = imx8mm_blk_ctl_probe,
+	.driver = {
+		.name = "imx8mm-blk-ctl",
+		.of_match_table = of_match_ptr(imx_blk_ctl_of_match),
+		.pm = &imx_blk_ctl_pm_ops,
+	},
+};
+module_platform_driver(imx_blk_ctl_driver);
-- 
2.30.0




More information about the linux-arm-kernel mailing list