[PATCH 09/16] soc: imx: gpcv2: add support for optional resets

[Peng Fan (OSS)]

From: Lucas Stach <l.stach at pengutronix.de>

Normally the reset for the devices inside the power domain is
triggered automatically from the PGC in the power-up sequencing,
however on i.MX8MM this doesn't work for the GPU power domains.

Add support for triggering the reset explicitly during the power
up sequencing.

Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
 drivers/soc/imx/gpcv2.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index 640f4165cfba..4a2c2a255d1a 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -15,6 +15,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
+#include <linux/reset.h>
 #include <linux/sizes.h>
 #include <dt-bindings/power/imx7-power.h>
 #include <dt-bindings/power/imx8mq-power.h>
@@ -108,6 +109,7 @@ struct imx_pgc_domain {
 	struct generic_pm_domain genpd;
 	struct regmap *regmap;
 	struct regulator *regulator;
+	struct reset_control *reset;
 	struct clk_bulk_data *clks;
 	int num_clks;
 
@@ -163,6 +165,8 @@ static int imx_pgc_power_up(struct generic_pm_domain *genpd)
 		goto out_regulator_disable;
 	}
 
+	reset_control_assert(domain->reset);
+
 	if (domain->bits.pxx) {
 		/* request the domain to power up */
 		regmap_update_bits(domain->regmap, GPC_PU_PGC_SW_PUP_REQ,
@@ -185,6 +189,11 @@ static int imx_pgc_power_up(struct generic_pm_domain *genpd)
 				   GPC_PGC_CTRL_PCR, 0);
 	}
 
+	/* delay for reset to propagate */
+	udelay(5);
+
+	reset_control_deassert(domain->reset);
+
 	/* request the ADB400 to power up */
 	if (domain->bits.hskreq) {
 		regmap_update_bits(domain->regmap, GPC_PU_PWRHSK,
@@ -531,11 +540,17 @@ static int imx_pgc_domain_probe(struct platform_device *pdev)
 				      domain->voltage, domain->voltage);
 	}
 
+
 	domain->num_clks = devm_clk_bulk_get_all(domain->dev, &domain->clks);
 	if (domain->num_clks < 0)
 		return dev_err_probe(domain->dev, domain->num_clks,
 				     "Failed to get domain's clocks\n");
 
+	domain->reset = devm_reset_control_array_get_optional_exclusive(domain->dev);
+	if (IS_ERR(domain->reset))
+		return dev_err_probe(domain->dev, PTR_ERR(domain->reset),
+				     "Failed to get domain's resets\n");
+
 	pm_runtime_enable(domain->dev);
 
 	if (domain->bits.map)
-- 
2.30.0