[PATCH 0/7] Input: mtk-pmic-keys - add support for MT6358

Mattijs Korpershoek mkorpershoek at baylibre.com
Wed Apr 28 17:42:12 BST 2021


The MediaTek MT6358 PMIC has support for two buttons: PWR and HOME.

The interrupt logic is a little different than other PMICs from the
same family:
* for MT6323 and MT6397, we have one interrupt source per button
* for MT6358, we have two interrupts lines per button: the press and
* release interrupts are distinct sources.

These series:
* Fix a NULL ptr error when we use mtk-pmic-keys without dts code
* Rework the mt6397 driver to prepare for this different interrupt logic
* Add support for the MT6358 power buttons

This has been functionally tested (using evtest) on
the mt8183-pumpkin board on linux/master

It has also been used for a couple of months in a downstream
tree based on v5.4.

Mattijs Korpershoek (7):
  Input: mtk-pmic-keys - check for NULL on of_match_device()
  mfd: mt6397: add mt6358 register definitions for power key
  mfd: mt6397: keys: use named IRQs instead of index
  dt-bindings: input: mtk-pmic-keys: add MT6358 binding definition
  Input: mtk-pmic-keys - add support for MT6358
  mfd: mt6397: Add PMIC keys for MT6358
  arm64: dts: mt6358: add mt6358-keys node

 .../bindings/input/mtk-pmic-keys.txt          |  5 +-
 arch/arm64/boot/dts/mediatek/mt6358.dtsi      | 12 ++++
 drivers/input/keyboard/mtk-pmic-keys.c        | 59 +++++++++++++++++--
 drivers/mfd/mt6397-core.c                     | 20 +++++--
 include/linux/mfd/mt6358/registers.h          |  2 +
 5 files changed, 89 insertions(+), 9 deletions(-)


base-commit: 4a0225c3d208cfa6e4550f2210ffd9114a952a81
-- 
2.27.0




More information about the linux-arm-kernel mailing list