arm32: panic in move_freepages (Was [PATCH v2 0/4] arm64: drop pfn_valid_within() and simplify pfn_valid())
Mike Rapoport
rppt at kernel.org
Tue Apr 27 07:23:33 BST 2021
On Mon, Apr 26, 2021 at 11:26:38PM +0800, Kefeng Wang wrote:
>
> On 2021/4/26 13:20, Mike Rapoport wrote:
> > On Sun, Apr 25, 2021 at 03:51:56PM +0800, Kefeng Wang wrote:
> > > On 2021/4/25 15:19, Mike Rapoport wrote:
> > >
> > > On Fri, Apr 23, 2021 at 04:11:16PM +0800, Kefeng Wang wrote:
> > >
> > > I tested this patchset(plus arm32 change, like arm64 does)
> > > based on lts 5.10，add some debug log, the useful info shows
> > > below, if we enable HOLES_IN_ZONE, no panic, any idea,
> > > thanks.
> > >
> > > Are there any changes on top of 5.10 except for pfn_valid() patch?
> > > Do you see this panic on 5.10 without the changes?
> > >
> > > Yes, there are some BSP support for arm board based on 5.10,
Is it possible to test 5.12?
> > > with or without your patch will get same panic, the panic pfn=de600
> > > in the range of [dcc00,de00] which is freed by free_memmap, start_pfn
> > > = dcc00, dcc00000 end_pfn = de700, de700000
> > >
> > > we see the PC is at PageLRU, same reason like arm64 panic log,
> > >
> > > "PageBuddy in move_freepages returns false
> > > Then we call PageLRU, the macro calls PF_HEAD which is compound_page()
> > > compound_page reads page->compound_head, it is 0xffffffffffffffff, so it
> > > resturns 0xfffffffffffffffe - and accessing this address causes crash"
> > >
> > > Can you see stack backtrace beyond move_freepages_block?
> > >
> > > I do some oom test, so the log is about memory allocate,
> > >
> > > [<c02383c8>] (move_freepages_block) from [<c0238668>]
> > > (steal_suitable_fallback+0x174/0x1f4)
> > >
> > > [<c0238668>] (steal_suitable_fallback) from [<c023999c>] (get_page_from_freelist+0x490/0x9a4)
> >
> > Hmm, this is called with a page from free list, having a page from a freed
> > part of the memory map passed to steal_suitable_fallback() means that there
> > is an issue with creation of the free list.
> >
> > Can you please add "memblock=debug" to the kernel command line and post the
> > log?
>
> Here is the log,
>
> CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=1ac5387d
>
> CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> OF: fdt: Machine model: HISI-CA9
> memblock_add: [0x80a00000-0x855fffff] early_init_dt_scan_memory+0x11c/0x188
> memblock_add: [0x86a00000-0x87dfffff] early_init_dt_scan_memory+0x11c/0x188
> memblock_add: [0x8bd00000-0x8c4fffff] early_init_dt_scan_memory+0x11c/0x188
> memblock_add: [0x8e300000-0x8ecfffff] early_init_dt_scan_memory+0x11c/0x188
> memblock_add: [0x90d00000-0xbfffffff] early_init_dt_scan_memory+0x11c/0x188
> memblock_add: [0xcc000000-0xdc9fffff] early_init_dt_scan_memory+0x11c/0x188
> memblock_add: [0xe0800000-0xe0bfffff] early_init_dt_scan_memory+0x11c/0x188
> memblock_add: [0xf5300000-0xf5bfffff] early_init_dt_scan_memory+0x11c/0x188
> memblock_add: [0xf5c00000-0xf6ffffff] early_init_dt_scan_memory+0x11c/0x188
> memblock_add: [0xfe100000-0xfebfffff] early_init_dt_scan_memory+0x11c/0x188
> memblock_add: [0xfec00000-0xffffffff] early_init_dt_scan_memory+0x11c/0x188
> memblock_add: [0xde700000-0xde9fffff] early_init_dt_scan_memory+0x11c/0x188
> memblock_add: [0xf4b00000-0xf52fffff] early_init_dt_scan_memory+0x11c/0x188
> memblock_add: [0xfda00000-0xfe0fffff] early_init_dt_scan_memory+0x11c/0x188
> memblock_reserve: [0x80a01000-0x80a02d2e] setup_arch+0x68/0x5c4
> Malformed early option 'vecpage_wrprotect'
> Memory policy: Data cache writealloc
> memblock_reserve: [0x80b00000-0x812e8057] arm_memblock_init+0x34/0x14c
> memblock_reserve: [0x83000000-0x84ffffff] arm_memblock_init+0x100/0x14c
> memblock_reserve: [0x80a04000-0x80a07fff] arm_memblock_init+0xa0/0x14c
> memblock_reserve: [0x80a00000-0x80a02fff] hisi_mem_reserve+0x14/0x30
> MEMBLOCK configuration:
> memory size = 0x4c0fffff reserved size = 0x027ef058
> memory.cnt = 0xa
> memory[0x0] [0x80a00000-0x855fffff], 0x04c00000 bytes flags: 0x0
> memory[0x1] [0x86a00000-0x87dfffff], 0x01400000 bytes flags: 0x0
> memory[0x2] [0x8bd00000-0x8c4fffff], 0x00800000 bytes flags: 0x0
> memory[0x3] [0x8e300000-0x8ecfffff], 0x00a00000 bytes flags: 0x0
> memory[0x4] [0x90d00000-0xbfffffff], 0x2f300000 bytes flags: 0x0
> memory[0x5] [0xcc000000-0xdc9fffff], 0x10a00000 bytes flags: 0x0
> memory[0x6] [0xde700000-0xde9fffff], 0x00300000 bytes flags: 0x0
> memory[0x7] [0xe0800000-0xe0bfffff], 0x00400000 bytes flags: 0x0
> memory[0x8] [0xf4b00000-0xf6ffffff], 0x02500000 bytes flags: 0x0
> memory[0x9] [0xfda00000-0xfffffffe], 0x025fffff bytes flags: 0x0
> reserved.cnt = 0x4
> reserved[0x0] [0x80a00000-0x80a02fff], 0x00003000 bytes flags: 0x0
> reserved[0x1] [0x80a04000-0x80a07fff], 0x00004000 bytes flags: 0x0
> reserved[0x2] [0x80b00000-0x812e8057], 0x007e8058 bytes flags: 0x0
> reserved[0x3] [0x83000000-0x84ffffff], 0x02000000 bytes flags: 0x0
...
> Zone ranges:
> Normal [mem 0x0000000080a00000-0x00000000b01fffff]
> HighMem [mem 0x00000000b0200000-0x00000000ffffefff]
> Movable zone start for each node
> Early memory node ranges
> node 0: [mem 0x0000000080a00000-0x00000000855fffff]
> node 0: [mem 0x0000000086a00000-0x0000000087dfffff]
> node 0: [mem 0x000000008bd00000-0x000000008c4fffff]
> node 0: [mem 0x000000008e300000-0x000000008ecfffff]
> node 0: [mem 0x0000000090d00000-0x00000000bfffffff]
> node 0: [mem 0x00000000cc000000-0x00000000dc9fffff]
> node 0: [mem 0x00000000de700000-0x00000000de9fffff]
> node 0: [mem 0x00000000e0800000-0x00000000e0bfffff]
> node 0: [mem 0x00000000f4b00000-0x00000000f6ffffff]
> node 0: [mem 0x00000000fda00000-0x00000000ffffefff]
> Zeroed struct page in unavailable ranges: 513 pages
> Initmem setup node 0 [mem 0x0000000080a00000-0x00000000ffffefff]
> On node 0 totalpages: 311551
> Normal zone: 1230 pages used for memmap
> Normal zone: 0 pages reserved
> Normal zone: 157440 pages, LIFO batch:31
> HighMem zone: 154111 pages, LIFO batch:31
AFAICT the range [de600000, de7ff000] should not be added to the free
lists.
Can you try with the below patch:
diff --git a/mm/memblock.c b/mm/memblock.c
index afaefa8fc6ab..7f3c33d53f87 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -1994,6 +1994,8 @@ static unsigned long __init __free_memory_core(phys_addr_t start,
unsigned long end_pfn = min_t(unsigned long,
PFN_DOWN(end), max_low_pfn);
+ pr_info("%s: range: %pa - %pa, pfn: %lx - %lx\n", __func__, &start, &end, start_pfn, end_pfn);
+
if (start_pfn >= end_pfn)
return 0;
> > > [<c023999c>] (get_page_from_freelist) from [<c023a4dc>] (__alloc_pages_nodemask+0x188/0xc08)
> > > [<c023a4dc>] (__alloc_pages_nodemask) from [<c0223078>] (alloc_zeroed_user_highpage_movable+0x14/0x3c)
> > > [<c0223078>] (alloc_zeroed_user_highpage_movable) from [<c0226768>] (handle_mm_fault+0x254/0xac8)
> > > [<c0226768>] (handle_mm_fault) from [<c04ba09c>] (do_page_fault+0x228/0x2f4)
> > > [<c04ba09c>] (do_page_fault) from [<c0111d80>] (do_DataAbort+0x48/0xd0)
> > > [<c0111d80>] (do_DataAbort) from [<c0100e00>] (__dabt_usr+0x40/0x60)
> > >
> > > Zone ranges:
> > > Normal [mem 0x0000000080a00000-0x00000000b01fffff]
> > > HighMem [mem 0x00000000b0200000-0x00000000ffffefff]
> > > Movable zone start for each node
> > > Early memory node ranges
> > > node 0: [mem 0x0000000080a00000-0x00000000855fffff]
> > > node 0: [mem 0x0000000086a00000-0x0000000087dfffff]
> > > node 0: [mem 0x000000008bd00000-0x000000008c4fffff]
> > > node 0: [mem 0x000000008e300000-0x000000008ecfffff]
> > > node 0: [mem 0x0000000090d00000-0x00000000bfffffff]
> > > node 0: [mem 0x00000000cc000000-0x00000000dc9fffff]
> > > node 0: [mem 0x00000000de700000-0x00000000de9fffff]
> > > node 0: [mem 0x00000000e0800000-0x00000000e0bfffff]
> > > node 0: [mem 0x00000000f4b00000-0x00000000f6ffffff]
> > > node 0: [mem 0x00000000fda00000-0x00000000ffffefff]
> > >
> > > ----> free_memmap, start_pfn = 85800, 85800000 end_pfn = 86a00, 86a00000
> > > ----> free_memmap, start_pfn = 8c800, 8c800000 end_pfn = 8e300, 8e300000
> > > ----> free_memmap, start_pfn = 8f000, 8f000000 end_pfn = 90000, 90000000
> > > ----> free_memmap, start_pfn = dcc00, dcc00000 end_pfn = de700, de700000
> > > ----> free_memmap, start_pfn = dec00, dec00000 end_pfn = e0000, e0000000
> > > ----> free_memmap, start_pfn = e0c00, e0c00000 end_pfn = e4000, e4000000
> > > ----> free_memmap, start_pfn = f7000, f7000000 end_pfn = f8000, f8000000
> > > === >move_freepages: start_pfn/end_pfn [de601, de7ff], [de600000, de7ff000]
> > > : pfn =de600 pfn2phy = de600000 , page = ef3cc000, page-flags = ffffffff
> > > 8<--- cut here ---
> > > Unable to handle kernel paging request at virtual address fffffffe
> > > pgd = 5dd50df5
> > > [fffffffe] *pgd=affff861, *pte=00000000, *ppte=00000000
> > > Internal error: Oops: 37 [#1] SMP ARM
> > > Modules linked in: gmac(O)
> > > CPU: 2 PID: 635 Comm: test-oom Tainted: G O 5.10.0+ #31
> > > Hardware name: Hisilicon A9
> > > PC is at move_freepages_block+0x150/0x278
> > > LR is at move_freepages_block+0x150/0x278
> > > pc : [<c02383a4>] lr : [<c02383a4>] psr: 200e0393
> > > sp : c4179cf8 ip : 00000000 fp : 00000001
> > > r10: c4179d58 r9 : 000de7ff r8 : 00000000
> > > r7 : c0863280 r6 : 000de600 r5 : 000de600 r4 : ef3cc000
> > > r3 : ffffffff r2 : 00000000 r1 : ef5d069c r0 : fffffffe
> > > Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
> > > Control: 1ac5387d Table: 83b0c04a DAC: 55555555
> > > Process test-oom (pid: 635, stack limit = 0x25d667df)
> > >
> > >
--
Sincerely yours,
Mike.
More information about the linux-arm-kernel
mailing list