[PATCH V2 2/4] dt-bindings: clock: Convert ti,sci-clk to json schema

[Nishanth Menon]

Convert the ti,sci-clk to json schema for better checks and documentation.

Differences being:
 - Drop consumer example as they are documented in the corresponding
   bindings themselves.
 - Standardize the node name as clock-controller rather than clocks as
   it is more appropriate.
 - Drop phandle description for clock-cells as it is redundant.

Signed-off-by: Nishanth Menon <nm at ti.com>
Reviewed-by: Tero Kristo <kristo at kernel.org>
---

Changes since V1:
 * reviewed by from Tero
   https://lore.kernel.org/linux-arm-kernel/56388707-c8d3-ebdf-77a2-c5a983856b4d@kernel.org/
 * Updated commit message to drop the 'checkpatch warning'
 * Dropped reference to clock.yaml

v1: https://lore.kernel.org/linux-arm-kernel/20210416063721.20538-3-nm@ti.com/

 .../devicetree/bindings/clock/ti,sci-clk.txt  | 36 --------------
 .../devicetree/bindings/clock/ti,sci-clk.yaml | 49 +++++++++++++++++++
 2 files changed, 49 insertions(+), 36 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/ti,sci-clk.txt
 create mode 100644 Documentation/devicetree/bindings/clock/ti,sci-clk.yaml

diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt
deleted file mode 100644
index 4e59dc6b1778..000000000000
--- a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Texas Instruments TI-SCI Clocks
-===============================
-
-All clocks on Texas Instruments' SoCs that contain a System Controller,
-are only controlled by this entity. Communication between a host processor
-running an OS and the System Controller happens through a protocol known
-as TI-SCI[1]. This clock implementation plugs into the common clock
-framework and makes use of the TI-SCI protocol on clock API requests.
-
-[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
-
-Required properties:
--------------------
-- compatible: Must be "ti,k2g-sci-clk"
-- #clock-cells: Shall be 2.
-  In clock consumers, this cell represents the device ID and clock ID
-  exposed by the PM firmware. The list of valid values for the device IDs
-  and clocks IDs for 66AK2G SoC are documented at
-  http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data
-
-Examples:
---------
-
-pmmc: pmmc {
-	compatible = "ti,k2g-sci";
-
-	k2g_clks: clocks {
-		compatible = "ti,k2g-sci-clk";
-		#clock-cells = <2>;
-	};
-};
-
-uart0: serial at 2530c00 {
-	compatible = "ns16550a";
-	clocks = <&k2g_clks 0x2c 0>;
-};
diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
new file mode 100644
index 000000000000..0e370289a053
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,sci-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-SCI clock controller node bindings
+
+maintainers:
+  - Nishanth Menon <nm at ti.com>
+
+description: |
+  Some TI SoCs contain a system controller (like the Power Management Micro
+  Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling
+  the state of the various hardware modules present on the SoC. Communication
+  between the host processor running an OS and the system controller happens
+  through a protocol called TI System Control Interface (TI-SCI protocol).
+
+  This clock controller node uses the TI SCI protocol to perform various clock
+  management of various hardware modules (devices) present on the SoC. This
+  node must be a child node of the associated TI-SCI system controller node.
+
+properties:
+  $nodename:
+    pattern: "^clock-controller$"
+
+  compatible:
+    const: ti,k2g-sci-clk
+
+  "#clock-cells":
+    const: 2
+    description:
+      The two cells represent values that the TI-SCI controller defines.
+
+      The first cell should contain the device ID.
+
+      The second cell should contain the clock ID.
+
+      Please see  http://processors.wiki.ti.com/index.php/TISCI for
+      protocol documentation for the values to be used for different devices.
+
+additionalProperties: false
+
+examples:
+  - |
+    k3_clks: clock-controller {
+        compatible = "ti,k2g-sci-clk";
+        #clock-cells = <2>;
+    };
-- 
2.31.0