[PATCH V2] ARM: dts: imx6q-dhcom: Add PU, VDD1P1, VDD2P5 regulators

[Fabio Estevam]

Hi Marek,

On Fri, Apr 23, 2021 at 2:57 PM Marek Vasut <marex at denx.de> wrote:
>
> Per schematic, both PU and SOC regulator are supplied from LTC3676 SW1
> via VDDSOC_IN rail, add the PU input. Both VDD1P1, VDD2P5 are supplied
> from LTC3676 SW2 via VDDHIGH_IN rail, add both inputs.
>
> While no instability or problems are currently observed, the regulators
> should be fully described in DT and that description should fully match
> the hardware, else this might lead to unforseen issues later. Fix this.
>
> Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2")
> Cc: Christoph Niedermaier <cniedermaier at dh-electronics.com>
> Cc: Fabio Estevam <festevam at gmail.com>
> Cc: Ludwig Zenz <lzenz at dh-electronics.com>
> Cc: NXP Linux Team <linux-imx at nxp.com>
> Cc: Shawn Guo <shawnguo at kernel.org>
> Cc: stable at vger.kernel.org

You missed your Signed-off-by tag.

With that added:

Reviewed-by: Fabio Estevam <festevam at gmail.com>