[PATCH v2 6/7] arm64: dts: rockchip: add core dtsi for RK3568 SoC

Marc Zyngier maz at kernel.org
Sun Apr 25 11:28:49 BST 2021


As I reviewed a previous version of this series, please have the
courtesy of cc'ing me on further revisions of this series.

On Sun, 25 Apr 2021 10:44:39 +0100,
<cl at rock-chips.com> wrote:
> 
> From: Liang Chen <cl at rock-chips.com>
> 
> RK3568 is a high-performance and low power quad-core application processor
> designed for personal mobile internet device and AIoT equipments. This patch
> add basic core dtsi file for it.
> 
> We use scmi_clk for cortex-a55 instead of standard ARMCLK, so that
> kernel/uboot/rtos can change cpu clk with the same code in ATF, and we will
> enalbe a special high-performacne PLL when high frequency is required. The
> smci_clk code is in ATF, and clkid for cpu is 0, as below:
> 
>     cpu0: cpu at 0 {
>         device_type = "cpu";
>         compatible = "arm,cortex-a55";
>         reg = <0x0 0x0>;
>         clocks = <&scmi_clk 0>;
>     };
> 
> Signed-off-by: Liang Chen <cl at rock-chips.com>
> ---
>  .../boot/dts/rockchip/rk3568-pinctrl.dtsi     | 3119 +++++++++++++++++
>  arch/arm64/boot/dts/rockchip/rk3568.dtsi      |  812 +++++
>  2 files changed, 3931 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3568.dtsi

[...]

> diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> new file mode 100644
> index 000000000000..66cb50218ca1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> @@ -0,0 +1,812 @@

[...]

> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
> +		arm,no-tick-in-suspend;

My questions on this property still stand [1].

> +	};
> +
> +	xin24m: xin24m {
> +		compatible = "fixed-clock";
> +		clock-frequency = <24000000>;
> +		clock-output-names = "xin24m";
> +		#clock-cells = <0>;
> +	};
> +
> +	xin32k: xin32k {
> +		compatible = "fixed-clock";
> +		clock-frequency = <32768>;
> +		clock-output-names = "xin32k";
> +		pinctrl-0 = <&clk32k_out0>;
> +		pinctrl-names = "default";
> +		#clock-cells = <0>;
> +	};
> +
> +	gic: interrupt-controller at fd400000 {
> +		compatible = "arm,gic-v3";
> +		reg = <0x0 0xfd400000 0 0x10000>, /* GICD */
> +		      <0x0 0xfd460000 0 0xc0000>; /* GICR */
> +		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-controller;
> +		#interrupt-cells = <3>;
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;

My request for a full description of the GICA region still stands [1].

Thanks,

	M.

[1] https://lore.kernel.org/r/87o8e2sm1u.wl-maz@kernel.org

-- 
Without deviation from the norm, progress is not possible.



More information about the linux-arm-kernel mailing list