[PATCH v20 1/2] scsi: ufs: Enable power management for wlun

[Adrian Hunter]

On 23/04/21 7:23 am, Adrian Hunter wrote:
> On 22/04/21 7:38 pm, Asutosh Das (asd) wrote:
>> On 4/20/2021 12:42 AM, Adrian Hunter wrote:
>>> On 20/04/21 7:15 am, Adrian Hunter wrote:
>>>> On 20/04/21 12:53 am, Asutosh Das (asd) wrote:
>>>>> On 4/19/2021 11:37 AM, Adrian Hunter wrote:
>>>>>> On 16/04/21 10:49 pm, Asutosh Das wrote:
>>>>>>>
>>>>>>> Co-developed-by: Can Guo <cang at codeaurora.org>
>>>>>>> Signed-off-by: Can Guo <cang at codeaurora.org>
>>>>>>> Signed-off-by: Asutosh Das <asutoshd at codeaurora.org>
>>>>>>> ---
>>>>>>
>>>>>> I came across 3 issues while testing.  See comments below.
>>>>>>
>>>>> Hi Adrian
>>>>> Thanks for the comments.
>>>>>> <SNIP>
>>>>>>
>>>>>>> @@ -5794,7 +5839,7 @@ static void ufshcd_err_handling_unprepare(struct ufs_hba *hba)
>>>>>>>        if (ufshcd_is_clkscaling_supported(hba))
>>>>>>>            ufshcd_clk_scaling_suspend(hba, false);
>>>>>>>        ufshcd_clear_ua_wluns(hba);
>>>>>>
>>>>>> ufshcd_clear_ua_wluns() deadlocks trying to clear UFS_UPIU_RPMB_WLUN
>>>>>> if sdev_rpmb is suspended and sdev_ufs_device is suspending.
>>>>>> e.g. ufshcd_wl_suspend() is waiting on host_sem while ufshcd_err_handler()
>>>>>> is running, at which point sdev_rpmb has already suspended.
>>>>>>
>>>>> Umm, I didn't understand this deadlock.
>>>>> When you say, sdev_rpmb is suspended, does it mean runtime_suspended?
>>>>> sdev_ufs_device is suspending - this can't be runtime_suspending, while ufshcd_err_handling_unprepare is running.
>>>>>
>>>>> If you've a call-stack of this deadlock, please can you share it with me. I'll also try to reproduce this.
>>>>
>>>> Yes it is system suspend. sdev_rpmb has suspended, sdev_ufs_device is waiting on host_sem.
>>>> ufshcd_err_handler() holds host_sem. ufshcd_clear_ua_wlun(UFS_UPIU_RPMB_WLUN) gets stuck.
>>>> I will get some call-stacks.
>>>
>> Hi Adrian,
>>
>> Thanks for the call stacks.
>> From the current information, I can't say for sure why it'd get stuck in blk_queue_enter().
> 
> I presume SCSI is leaving the RPMB WLUN device runtime suspended and consequently the queue status is RPM_SUSPENDED
> 
>>
>> I tried reproducing this issue on my setup yesterday but couldn't.
>> Here's what I did:
>> 1. sdev_rpmb is RPM_SUSPENDED, checked before initiating system suspend
>> 2. sdev_ufs_device is RPM_RESUMED
>> 3. I triggered system suspend (echo mem > /sys/power/state) and scheduled the error handler from ufshcd_wl_suspend().
>> 4. Waited until error handler ran and then ufshcd_wl_suspend() blocks on host_sem.
>> 5. The ufshcd_clear_wa_wlun(UFS_UPIU_RPMB_WLUN) went through fine.
>>
>> Do you've some specific steps to reproduce this or a script, perhaps? If so, please can you share it with me. I will try again.
> 
> I was using a device that gives occasional errors, but I will what see I can do.

I have attached 2 patches to reproduce the issue, and the test script I used.
Note it is using down_timeout() so it doesn't lock up completely.
The kernel messages are:

[   79.385456] ufshcd_wl_suspend: doing ufshcd_schedule_eh_work
[   79.385511] ufshcd_wl_suspend: sleeping 1000 ms
[   79.386916] ufshcd_err_handler: start
[   79.386979] ufshcd_err_handler: got sem
[   79.387053] ufshcd_err_handling_unprepare: start
[   79.387302] ufshcd_clear_ua_wluns: before ufshcd_clear_ua_wlun(hba, UFS_UPIU_RPMB_WLUN)
[   80.435878] ufshcd_wl_suspend: trying to get sem
[   85.683876] ufshcd_wl_suspend: failed to get sem
[   85.683993] ufs_device_wlun 0:0:0:49488: PM: failed to suspend async: error -22
[   85.686901] ufshcd_clear_ua_wluns: after ufshcd_clear_ua_wlun(hba, UFS_UPIU_RPMB_WLUN), ret 0
[   85.687025] ufshcd_err_handling_unprepare: finish
[   85.687090] ufshcd_err_handler: finish 


-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-changes-suggested-since-v20.patch
Type: text/x-patch
Size: 3276 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20210423/632b9dfc/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0002-instrumentation-to-reproduce-issue.patch
Type: text/x-patch
Size: 3068 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20210423/632b9dfc/attachment-0001.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: go.sh
Type: application/x-shellscript
Size: 316 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20210423/632b9dfc/attachment-0002.bin>