[PATCH net v2 0/2] Change phy-mode to RGMII-ID to enable delay pins for RTL8211E

[patchwork-bot+netdevbpf at kernel.org]

Hello:

This series was applied to netdev/net.git (refs/heads/master):

On Fri, 23 Apr 2021 02:31:47 +0900 you wrote:
> UniPhier PXs2, LD20, and PXs3 boards have RTL8211E ethernet phy, and the
> phy have the RX/TX delays of RGMII interface using pull-ups on the RXDLY
> and TXDLY pins.
> 
> After the commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx
> delay config"), the delays are working correctly, however, "rgmii" means
> no delay and the phy doesn't work. So need to set the phy-mode to
> "rgmii-id" to show that RX/TX delays are enabled.
> 
> [...]

Here is the summary with links:
  - [net,v2,1/2] ARM: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for RTL8211E
    https://git.kernel.org/netdev/net/c/9ba585cc5b56
  - [net,v2,2/2] arm64: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for RTL8211E
    https://git.kernel.org/netdev/net/c/dcabb06bf127

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html