[PATCH 1/3] dt-bindings: iommu: rockchip: Convert IOMMU to DT schema

[Benjamin Gaignard]

Convert Rockchip IOMMU to DT schema

Signed-off-by: Benjamin Gaignard <benjamin.gaignard at collabora.com>
---
 .../bindings/iommu/rockchip,iommu.txt         | 38 ----------
 .../bindings/iommu/rockchip,iommu.yaml        | 76 +++++++++++++++++++
 2 files changed, 76 insertions(+), 38 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
 create mode 100644 Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml

diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
deleted file mode 100644
index 6ecefea1c6f9..000000000000
--- a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Rockchip IOMMU
-==============
-
-A Rockchip DRM iommu translates io virtual addresses to physical addresses for
-its master device.  Each slave device is bound to a single master device, and
-shares its clocks, power domain and irq.
-
-Required properties:
-- compatible      : Should be "rockchip,iommu"
-- reg             : Address space for the configuration registers
-- interrupts      : Interrupt specifier for the IOMMU instance
-- interrupt-names : Interrupt name for the IOMMU instance
-- #iommu-cells    : Should be <0>.  This indicates the iommu is a
-                    "single-master" device, and needs no additional information
-                    to associate with its master device.  See:
-                    Documentation/devicetree/bindings/iommu/iommu.txt
-- clocks          : A list of clocks required for the IOMMU to be accessible by
-                    the host CPU.
-- clock-names     : Should contain the following:
-	"iface" - Main peripheral bus clock (PCLK/HCL) (required)
-	"aclk"  - AXI bus clock (required)
-
-Optional properties:
-- rockchip,disable-mmu-reset : Don't use the mmu reset operation.
-			       Some mmu instances may produce unexpected results
-			       when the reset operation is used.
-
-Example:
-
-	vopl_mmu: iommu at ff940300 {
-		compatible = "rockchip,iommu";
-		reg = <0xff940300 0x100>;
-		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vopl_mmu";
-		clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
-		clock-names = "aclk", "iface";
-		#iommu-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml
new file mode 100644
index 000000000000..ab128f8e4c73
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/rockchip,iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip IOMMU
+
+maintainers:
+  - Simon Xue <xxm at rock-chips.com>
+
+description: |+
+  A Rockchip DRM iommu translates io virtual addresses to physical addresses for
+  its master device. Each slave device is bound to a single master device, and
+  shares its clocks, power domain and irq.
+
+  For information on assigning IOMMU controller to its peripheral devices,
+  see generic IOMMU bindings.
+
+properties:
+  compatible:
+    const: rockchip,iommu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Core clock
+      - description: Interface clock
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: iface
+
+  "#iommu-cells":
+    const: 0
+
+  rockchip,disable-mmu-reset:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Don't use the mmu reset operation.
+      Some mmu instances may produce unexpected results
+      when the reset operation is used.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - "#iommu-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    vopl_mmu: iommu at ff940300 {
+      compatible = "rockchip,iommu";
+      reg = <0xff940300 0x100>;
+      interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "vopl_mmu";
+      clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+      clock-names = "aclk", "iface";
+      #iommu-cells = <0>;
+    };
-- 
2.25.1