[PATCH v1 5/5] arm64: dts: rockchip: add basic dts for RK3568 EVB
Johan Jonker
jbx6244 at gmail.com
Wed Apr 21 11:38:07 BST 2021
Hi Liang,
Add and convert a few more documents.
> cat rk3568.dtsi | grep compatible | sort -u
> compatible = "arm,armv8-timer";
> compatible = "arm,cortex-a55";
> compatible = "arm,cortex-a55-pmu", "arm,armv8-pmuv3";
> compatible = "arm,gic-v3";
> compatible = "arm,pl330", "arm,primecell";
> compatible = "arm,psci-1.0";
> compatible = "arm,scmi-shmem";
> compatible = "arm,scmi-smc";
> compatible = "fixed-clock";
> compatible = "operating-points-v2";
> compatible = "rockchip,gpio-bank";
pending
> compatible = "rockchip,rk3568";
> compatible = "rockchip,rk3568-cru";
pending
> compatible = "rockchip,rk3568-dwcmshc", "snps,dwcmshc-sdhci";
> compatible = "rockchip,rk3568-dw-mshc",
Keep string in one line for sdmmcX.
> compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd";
> compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
> compatible = "rockchip,rk3568-pinctrl";
pending
> compatible = "rockchip,rk3568-pmucru";
> compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd";
> compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
> compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
> compatible = "snps,dw-wdt";
Change this to:
"rockchip,rk3568-wdt", "snps,dw-wdt"
Compatible strings should be SoC orientated.
> compatible = "syscon-reboot-mode";
On 4/21/21 9:01 AM, cl at rock-chips.com wrote:
> From: Liang Chen <cl at rock-chips.com>
>
> This patch add rk3568-evb1-v10.dts for RK3568 evaluation board.
> add uart/emmc/i2c/rk809 node for basic function.
>
> Signed-off-by: Liang Chen <cl at rock-chips.com>
> ---
> .../devicetree/bindings/arm/rockchip.yaml | 5 +
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> .../boot/dts/rockchip/rk3568-evb1-v10.dts | 382 ++++++++++++++++++
> 3 files changed, 388 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
> index 4a6f772c1043..d26b062a9f0e 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.yaml
> +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
> @@ -560,6 +560,11 @@ properties:
> - const: rockchip,rk3368-evb-act8846
> - const: rockchip,rk3368
>
> + - description: Rockchip RK3568 Evaluation board
> + items:
> + - const: rockchip,rk3568-evb1-v10
> + - const: rockchip,rk3568
> +
Move this below rockchip,rk3399-evb board.
> - description: Rockchip RK3399 Evaluation board
> items:
> - const: rockchip,rk3399-evb
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index c3e00c0e2db7..7fdb41de01ec 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -51,3 +51,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
> new file mode 100644
> index 000000000000..be8aae2e8c67
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
> @@ -0,0 +1,382 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> + *
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include "rk3568.dtsi"
> +
> +/ {
> + model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
> + compatible = "rockchip,rk3568-evb1-v10", "rockchip,rk3568";
> +
> + chosen: chosen {
> + stdout-path = "serial2:1500000n8";
> + };
> +
> + dc_12v: dc-12v {
> + compatible = "regulator-fixed";
> + regulator-name = "dc_12v";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <12000000>;
> + regulator-max-microvolt = <12000000>;
> + };
> +
> + vcc3v3_sys: vcc3v3-sys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&dc_12v>;
> + };
> +
> + vcc5v0_sys: vcc5v0-sys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&dc_12v>;
> + };
> +
> + vcc5v0_host: vcc5v0-host-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc5v0_host_en>;
> + regulator-name = "vcc5v0_host";
> + regulator-always-on;
> + };
> +
> + vcc5v0_otg: vcc5v0-otg-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc5v0_otg_en>;
> + regulator-name = "vcc5v0_otg";
> + };
> +
> + vcc3v3_lcd0_n: vcc3v3-lcd0-n {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3_lcd0_n";
> + regulator-boot-on;
Add empty line between a node.
Change all of them.
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc3v3_lcd1_n: vcc3v3-lcd1-n {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3_lcd1_n";
> + regulator-boot-on;
dito
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + rk809: pmic at 20 {
> + compatible = "rockchip,rk809";
> + reg = <0x20>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> +
> + pinctrl-names = "default", "pmic-sleep",
> + "pmic-power-off", "pmic-reset";
> + pinctrl-0 = <&pmic_int>;
> + pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
> + pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
> + pinctrl-3 = <&soc_slppin_gpio>, <&rk817_slppin_rst>;
> +
> + rockchip,system-power-controller;
> + wakeup-source;
> + #clock-cells = <1>;
> + clock-output-names = "rk808-clkout1", "rk808-clkout2";
> + //fb-inner-reg-idxs = <2>;
> + /* 1: rst regs (default in codes), 0: rst the pmic */
Where is documented?
> + pmic-reset-func = <0>;
Where is documented?
> +
> + vcc1-supply = <&vcc3v3_sys>;
> + vcc2-supply = <&vcc3v3_sys>;
> + vcc3-supply = <&vcc3v3_sys>;
> + vcc4-supply = <&vcc3v3_sys>;
> + vcc5-supply = <&vcc3v3_sys>;
> + vcc6-supply = <&vcc3v3_sys>;
> + vcc7-supply = <&vcc3v3_sys>;
> + vcc8-supply = <&vcc3v3_sys>;
> + vcc9-supply = <&vcc3v3_sys>;
> +
> + pwrkey {
> + status = "okay";
> + };
> +
Where is documented?
> + pinctrl_rk8xx: pinctrl_rk8xx {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + rk817_slppin_null: rk817_slppin_null {
> + pins = "gpio_slp";
> + function = "pin_fun0";
> + };
> +
> + rk817_slppin_slp: rk817_slppin_slp {
> + pins = "gpio_slp";
> + function = "pin_fun1";
> + };
> +
> + rk817_slppin_pwrdn: rk817_slppin_pwrdn {
> + pins = "gpio_slp";
> + function = "pin_fun2";
> + };
> +
> + rk817_slppin_rst: rk817_slppin_rst {
> + pins = "gpio_slp";
> + function = "pin_fun3";
> + };
> + };
Where is documented?
> +
> + regulators {
> + vdd_logic: DCDC_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-init-microvolt = <900000>;
> + regulator-ramp-delay = <6001>;
> + regulator-initial-mode = <0x2>;
> + regulator-name = "vdd_logic";
regulator-name above all other regulator properties.
Change all of them.
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_gpu: DCDC_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-init-microvolt = <900000>;
> + regulator-ramp-delay = <6001>;
> + regulator-initial-mode = <0x2>;
> + regulator-name = "vdd_gpu";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-initial-mode = <0x2>;
> + regulator-name = "vcc_ddr";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vdd_npu: DCDC_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-init-microvolt = <900000>;
> + regulator-ramp-delay = <6001>;
> + regulator-initial-mode = <0x2>;
> + regulator-name = "vdd_npu";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdda0v9_image: LDO_REG1 {
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + regulator-name = "vdda0v9_image";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdda_0v9: LDO_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + regulator-name = "vdda_0v9";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdda0v9_pmu: LDO_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + regulator-name = "vdda0v9_pmu";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <900000>;
> + };
> + };
> +
> + vccio_acodec: LDO_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vccio_acodec";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vccio_sd: LDO_REG5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vccio_sd";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc3v3_pmu: LDO_REG6 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc3v3_pmu";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcca_1v8: LDO_REG7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcca_1v8";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcca1v8_pmu: LDO_REG8 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcca1v8_pmu";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcca1v8_image: LDO_REG9 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcca1v8_image";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_1v8: DCDC_REG5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc_1v8";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_3v3: SWITCH_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_3v3";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc3v3_sd: SWITCH_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc3v3_sd";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> + };
> + };
> +};
> +
> +
> +&pinctrl {
> + pmic {
> + pmic_int: pmic_int {
> + rockchip,pins =
> + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> +
> + soc_slppin_gpio: soc_slppin_gpio {
> + rockchip,pins =
> + <0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low>;
> + };
> +
> + soc_slppin_slp: soc_slppin_slp {
> + rockchip,pins =
> + <0 RK_PA2 1 &pcfg_pull_none>;
> + };
> +
> + soc_slppin_rst: soc_slppin_rst {
> + rockchip,pins =
> + <0 RK_PA2 2 &pcfg_pull_none>;
> + };
> + };
> +
> + usb {
> + vcc5v0_host_en: vcc5v0-host-en {
> + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + vcc5v0_otg_en: vcc5v0-otg-en {
> + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
Keep the same indent as in pmic and rk3568.dtsi for rockchip,pins
> + };
> + };
> +};
> +
> +&sdhci {
> + bus-width = <8>;
> + non-removable;
> + rockchip,txclk-tapnum = <0x8>;
> + max-frequency = <200000000>;
sort
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
>
More information about the linux-arm-kernel
mailing list