[PATCH 1/2] dt-bindings: usb: Document the Allwinner H6 DWC3 glue

[Samuel Holland]

The RST_BUS_XHCI reset line in the H6 affects both the DWC3 core and the
USB3 PHY. This suggests the reset line controls the USB3 IP as a whole.
Represent this by attaching the reset line to a glue layer device.

Signed-off-by: Samuel Holland <samuel at sholland.org>
---
 .../usb/allwinner,sun50i-h6-dwc3.yaml         | 75 +++++++++++++++++++
 1 file changed, 75 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/allwinner,sun50i-h6-dwc3.yaml

diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun50i-h6-dwc3.yaml b/Documentation/devicetree/bindings/usb/allwinner,sun50i-h6-dwc3.yaml
new file mode 100644
index 000000000000..86efd6d21ab4
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/allwinner,sun50i-h6-dwc3.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/allwinner,sun50i-h6-dwc3#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner H6 DWC3 USB controller
+
+maintainers:
+  - Chen-Yu Tsai <wens at csie.org>
+  - Maxime Ripard <mripard at kernel.org>
+
+properties:
+  compatible:
+    const: allwinner,sun50i-h6-dwc3
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  ranges: true
+
+  resets:
+    maxItems: 1
+
+# Required child node:
+
+patternProperties:
+  "^phy@[0-9a-f]+$":
+    $ref: allwinner,sun50i-h6-usb3-phy.yaml#
+
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
+
+required:
+  - compatible
+  - ranges
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun50i-h6-ccu.h>
+    #include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+    usb3: usb at 5200000 {
+        compatible = "allwinner,sun50i-h6-dwc3";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+        resets = <&ccu RST_BUS_XHCI>;
+
+        dwc3: usb at 5200000 {
+            compatible = "snps,dwc3";
+            reg = <0x05200000 0x10000>;
+            interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&ccu CLK_BUS_XHCI>,
+                     <&ccu CLK_BUS_XHCI>,
+                     <&rtc 0>;
+            clock-names = "ref", "bus_early", "suspend";
+            dr_mode = "host";
+            phys = <&usb3phy>;
+            phy-names = "usb3-phy";
+        };
+
+        usb3phy: phy at 5210000 {
+            compatible = "allwinner,sun50i-h6-usb3-phy";
+            reg = <0x5210000 0x10000>;
+            clocks = <&ccu CLK_USB_PHY1>;
+            resets = <&ccu RST_USB_PHY1>;
+            #phy-cells = <0>;
+        };
+    };
-- 
2.26.3