[PATCH V5 5/8] remoteproc: imx_rproc: initial support for mutilple start/stop method

[peng.fan at oss.nxp.com]

From: Peng Fan <peng.fan at nxp.com>

Add three methods IMX_RPROC_NONE(no need start/stop), IMX_RPROC_MMIO
(start/stop through mmio) and IMX_RPROC_SMC(start/stop through ARM SMCCC).

The current SoCs supported are all using IMX_RPROC_MMIO.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 drivers/remoteproc/imx_rproc.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index 06dac92e98e6..6289aeae95b6 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -74,6 +74,15 @@ struct imx_rproc_att {
 	int flags;
 };
 
+/* Remote core start/stop method */
+enum imx_rproc_method {
+	IMX_RPROC_NONE,
+	/* Through syscon regmap */
+	IMX_RPROC_MMIO,
+	/* Through ARM SMCCC */
+	IMX_RPROC_SMC,
+};
+
 struct imx_rproc_dcfg {
 	u32				src_reg;
 	u32				src_mask;
@@ -81,6 +90,7 @@ struct imx_rproc_dcfg {
 	u32				src_stop;
 	const struct imx_rproc_att	*att;
 	size_t				att_size;
+	enum imx_rproc_method		method;
 };
 
 struct imx_rproc {
@@ -183,6 +193,7 @@ static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mq = {
 	.src_stop	= IMX7D_M4_STOP,
 	.att		= imx_rproc_att_imx8mq,
 	.att_size	= ARRAY_SIZE(imx_rproc_att_imx8mq),
+	.method		= IMX_RPROC_MMIO,
 };
 
 static const struct imx_rproc_dcfg imx_rproc_cfg_imx7d = {
@@ -192,6 +203,7 @@ static const struct imx_rproc_dcfg imx_rproc_cfg_imx7d = {
 	.src_stop	= IMX7D_M4_STOP,
 	.att		= imx_rproc_att_imx7d,
 	.att_size	= ARRAY_SIZE(imx_rproc_att_imx7d),
+	.method		= IMX_RPROC_MMIO,
 };
 
 static const struct imx_rproc_dcfg imx_rproc_cfg_imx6sx = {
@@ -201,6 +213,7 @@ static const struct imx_rproc_dcfg imx_rproc_cfg_imx6sx = {
 	.src_stop	= IMX6SX_M4_STOP,
 	.att		= imx_rproc_att_imx6sx,
 	.att_size	= ARRAY_SIZE(imx_rproc_att_imx6sx),
+	.method		= IMX_RPROC_MMIO,
 };
 
 static int imx_rproc_start(struct rproc *rproc)
-- 
2.30.0